Abstract:A method using 1,10-phenanthroline (phen) to quantify Fe(II) and total Fe in nonrefractory minerals was modified to improve the accuracy and precision and to eliminate the inconvenience of performing much of the analysis under darkroom conditions. Reagents were combined to minimize solution-handling errors, volumes of the reagent additions were determined gravimetrically and the acid-matrix solution was preheated to near-boiling before sample contact. The darkness requirement, which stems from the photoreduction of Fe(III) to Fe(II) in the presence of phen, was eliminated by the use of opaque amber-colored high-density-polyethylene bottles during the digestion step and for storage of the digestate and subsequent dilutions before Fe(II) analysis. Reduction of Fe(III) for total-Fe analysis was accomplished either by exposure to light from a Hg-vapor lamp or by reaction with hydroxylamine, NH2OH. Although the minimum periods required for adequate reduction ranged from 1.5 to 4 h, the optimum reduction periods were between 6 and 10 h. When standard samples containing Fe(II) and MnCl2 were digested and analyzed for total-Fe using the light treatment (with incidental heating to 35–45 °C), significant decreases and in some instances, oscillations, in absorptivity were obtained. Similar experiments with NH2OH, or with CrCl3 showed no effect. The absorptivity of most digestates stored in opaque bottles was stable for at least 2 weeks, although digestates with Mn concentrations above 3 µg mL−1 showed proportional decreases in absorptivity. Analysis of 8 geochemical reference materials by the modified method (using NH2OH) yielded excellent agreement with published values and a mean relative standard deviation of 0.6%. Total-Fe results obtained using the light treatment, however, were generally lower (∼2% relative) than the NH2OH values, although this difference decreased with longer irradiation periods. Use of NH2OH was deemed preferable because it was simpler, faster, minimized interferences from Mn and eliminated the need for specialized apparatus. Lastly, MICA Fe was shown to be unreliable as a primary reference material for Fe(II) determinations.

Iron Determination after On-Line Sorbent Preconcentration by Fi-Fass Using 1, 10-Phenanthroline As a Complexing Agent

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

1,10-Phenanthroline As a Complexing Agent for On-Line Sorbent Extraction/preconcentration for Flow Injection–flame Atomic Absorption Spectrometry

Copper Determination by Flow Injection On-Line Sorbent Preconcentration Coupled with Flame Atomic Absorption Spectrometry Using 1,10 Phenanthroline

Determination of Nickel after Online Sorbent Preconcentration by FI-FAAS Using Dimethylglyoxime as a Complexing Agent

A Sensitive Fluorescence Quenching Method For The Determination Of Iron(Ii) With 1,10-Phenanthroline

Cobalt determination by means of flow injection on-line sorbent preconcentration-flame atomic absorption spectrometry with 1-nitroso-2-naphthol as a complexing reagent

Determination of trace copper and nickel in environmental and biological samples by flow injection on-line microcolumn preconcentration flame AAS using acrylic acid-grafted polytetrafluoroethylene fiber for column packing

Flow Injection On-line Photochemically Spectrofluorimetric Determination of Folic Acid in Pharmaceutical Preparations

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Improvements to the Quantitative Assay of Nonrefractory Minerals for Fe(II) and Total Fe Using 1,10-Phenanthroline

Determination of Cadmium in Biological-Materials by Flame Atomic-Absorption Spectrometry with Flow-Injection Online Sorption Preconcentration

Determination of Pb and Cd in water sample by on-line ion-exchange preconcentration-FAAS

Enrichment of iron(III), cobalt(II), nickel(II), and copper(II) by solid-phase extraction with 1,8-dihydroxyanthraquinone anchored to silica gel before their determination by flame atomic absorption spectrometry

Determination of the Bromate in Water Based on 1,10-Phenanthroline Fade-Subtracted the Amount of Fe2+-Spectrophotometry

A Fast and Efficient Procedure of Iron Species Determination Based on HPLC with a Short Column and Detection in High Resolution ICP OES

A Friendly Complexing Agent for Spectrophotometric Determination of Total Iron

High-performance Liquid Chromatographic Method for the Determination of Ultratrace Amounts of Iron(ii) in Aerosols, Rainwater, and Seawater

Flow-Injection Online Sorbent Extraction Preconcentration for Graphite-Furnace Atomic-Absorption Spectrometry

Determination of Chromium in Environmental Samples by Flame AAS with Flow Injection On-Line Coprecipitation

Flow injection on-line preconcentration and flame atomic absorption spectrometric determination of iron, cobalt, nickel, manganese and zinc in sea-water