Abstract:Flow injection (FI) techniques were used to develop an efficient on-line sorbent extraction pre-concentration system for graphite furnace atomic absorption spectrometry with lead as a model trace element. Bonded silica with octadecyl functional groups (C18) was used as sorbent in a 15-µl conically shaped micro-column. The lead diethyldithiocarbamate chelate was formed on-line, loaded on to the column for 60 s, washed with de-ionised water and eluted with ethanol into a collector with a volume of 75 µl, made from 0.35 mm i.d. polytetrafluoroethylene tubing. The collected eluate was introduced into the graphite tube by an air flow on initiation of the FI system for pre-concentration of the next sample. The reproducibility of FI peak gradients was exploited through precise timing of the collection of the eluate fraction so that end sections of the eluate bolus containing lower analyte concentrations were discarded. A 26-fold enhancement in peak area compared with 50 µl direct introduction was obtained with 60-s pre-concentration while achieving a precision of 1.9% relative standard deviation for 0.1 µg l–1 of Pb (n= 11), and a detection limit of 0.003 µg l–1(3σ). The complete cycle of operation was 150 s which conveniently fitted into the time interval between successive graphite furnace firings. Determination of Pb in sea water samples showed that the interfering matrix had been almost completely removed during the pre-concentration, and determinations were made without using chemical modifiers. Results obtained for National Research Council of Canada Standard Reference Materials CASS 1, CASS 2 [Seawater (Coastal)] and NASS 1 [Seawater (Open Ocean)] using matrix-matched standards and for the SLRS 1 Riverine Water using simple aqueous standards agreed well with certified values.

Cobalt determination by means of flow injection on-line sorbent preconcentration-flame atomic absorption spectrometry with 1-nitroso-2-naphthol as a complexing reagent

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Flame Atomic Absorption Spectrometric Determination of Cobalt in Biological Materials Using a Flow-Injection System with On-Line Preconcentration by Ion-Pair Adsorption

Determination of Nickel after Online Sorbent Preconcentration by FI-FAAS Using Dimethylglyoxime as a Complexing Agent

Determination of trace copper and nickel in environmental and biological samples by flow injection on-line microcolumn preconcentration flame AAS using acrylic acid-grafted polytetrafluoroethylene fiber for column packing

Syringe-to-syringe-dispersive liquid–phase microextraction combined with flame atomic absorption spectrometry for pre-concentration and determination of cobalt with the aid of experimental design

Iron Determination after On-Line Sorbent Preconcentration by Fi-Fass Using 1, 10-Phenanthroline As a Complexing Agent

Determination of lead in nickel nitrate by flow injection with an atomic absorption spectrophotometer

Flow-Injection Online Sorbent Extraction Preconcentration for Graphite-Furnace Atomic-Absorption Spectrometry

1,10-Phenanthroline As a Complexing Agent for On-Line Sorbent Extraction/preconcentration for Flow Injection–flame Atomic Absorption Spectrometry

Determination of cadmium in biological materials by flame atomic absorption spectrometry with flow-injection on-line sorption preconcentration

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

Flow injection on-line preconcentration and flame atomic absorption spectrometric determination of iron, cobalt, nickel, manganese and zinc in sea-water

Use of Nb(2)O(5)-SiO(2) in an automated on-line preconcentration system for determination of copper and cadmium by FAAS

Determination of Ultra-Trace Cobalt in Water Samples Using Dispersive Liquid-Liquid Microextraction Followed by Graphite Furnace Atomic Absorption Spectrometry

Flow Injection On-line Photochemically Spectrofluorimetric Determination of Folic Acid in Pharmaceutical Preparations

Determination of cobalt in food by magnetic solid-phase extraction (MSPE) preconcentration by polyaniline (PANI) and polythiophene (PTH) coated magnetic nanoparticles (MNPs) and microsample injection system – flame atomic absorption spectrometry (MIS-FAAS)

Copper Determination by Flow Injection On-Line Sorbent Preconcentration Coupled with Flame Atomic Absorption Spectrometry Using 1,10 Phenanthroline

Determination of Trace Phosphorus in Cobalt-Niobium-zirconium Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry

Determination of Ni, Cu and Hg by flow injection preconcentration coupled with HPLC

Determination of Trace Cobalt in Water Samples by Ionic Liquid-Dispersive Liquid–Liquid Microextraction and Graphite Furnace Atomic Absorption Spectrometry