Abstract:Toxicity, mobility, bioavailability and biofunctions of chromium, cadmium, mercury and lead are heavily dependent upon their specific chemical forms, leading to a high demand to metal speciation analysis rather than total quantification. Simultaneous speciation analysis of multiple metal(loid)s is attractive to a large sample capacity containing unstable analytes due to its economic and environmental advantages over the conventional single elemental strategies. In this work, an analytical method integrating online solid phase extraction into high performance liquid chromatography interfaced with inductively coupled plasma mass spectrometry (ICP-MS) to simultaneously preconcentrate and quantify Cr, Cd, Hg and Pb forms in pg L-1 levels in water was developed. Cr (III + VI), Cd(II), Hg(II), Pb(II), methylmercury (MeHg), ethylmercury (EtHg), and trimethyl (TML) and triethyl lead (TEL) were captured by the C18 adsorbent (equilibrated with 10 mL of 1.0 mM 2-hydroxyethanethiol at 10 mL min-1) and eluted by mobile phase (5.0 mM Cys at pH 2.0), then completely separated on the C18 column within 8.0 min and eventually determined by ICP-MS. Low limits of detection (0.001-0.007 ng L-1) and quantification (0.003-0.023 ng L-1), good relative standard deviations (<4%) and high enrichment factors (827-2656 folds) were obtained with good linearities. Three reference materials of total cadmium (GBW08602), total mercury (GBW08603) and total lead (GBW08601) in water were analyzed by the developed method to validate the accuracy with good agreement with certified values and satisfactory recoveries (92-100%). This method was proved feasible by the determination of Cr, Cd, Hg and Pb compounds in drinking water, river water, pond water and tap water.

Determination of Pb and Cd in water sample by on-line ion-exchange preconcentration-FAAS

On-line separation and preconcentration of trace cadmium in environmental water samples by micro column filled with modified nanometer Si-HAP prior to FAAS determination

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Determination of trace copper and nickel in environmental and biological samples by flow injection on-line microcolumn preconcentration flame AAS using acrylic acid-grafted polytetrafluoroethylene fiber for column packing

THE DETERMINATION OF TRACE AMOUNTS OF HEAVY-METALS IN WATERS BY A FLOW-INJECTION SYSTEM INCLUDING ION-EXCHANGE PRECONCENTRATION AND FLAME ATOMIC-ABSORPTION SPECTROMETRIC DETECTION

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

Determination of cadmium in biological materials by flame atomic absorption spectrometry with flow-injection on-line sorption preconcentration

Use of Nb(2)O(5)-SiO(2) in an automated on-line preconcentration system for determination of copper and cadmium by FAAS

Separation, Preconcentration, and Determination of Lead, Cadmium, and Iron Using Cloud Point Extraction with Flame Atomic Absorption Spectrometry

Online Flow-Injection Cobalt-Ammonium Pyrrolidin-1-Yldithioformate Coprecipitation for Preconcentration of Trace Amounts of Metals in Waters with Simultaneous Determination by Inductively-Coupled Plasma-Atomic Emission-Spectrometry

An Efficient Flow-Injection System with On-Line Ion-Exchange Preconcentration for the Determination of Trace Amounts of Heavy Metals by Atomic Absorption Spectrometry

Simultaneous on-line preconcentration and determination of trace metals in environmental samples using a modified nanometer-sized alumina packed micro-column by flow injection combined with ICP-OES

Acrylic acid grafted polytetrafluoroethylene fiber as new packing for flow injection on-line microcolumn preconcentration coupled with flame atomic absorption spectrometry for determination of lead and cadmium in environmental and biological samples

DIRECT DETERMINATION OF TRACE AMOUNTS OF METAL ELEMENTS IN WATER BY DERIVATIVE FAAS

High Efficiency Low Sample Consumption On-Line Ion-Exchange Pre-Concentration System for Flow Injection Flame Atomic Absorption Spectrometry

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Online anion exchange column preconcentration and high performance liquid chromatographic separation with inductively coupled plasma mass spectrometry detection for mercury speciation analysis.

A Simple and Sensitive Flow-Injection On-line Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry for the Determination of Ultra-trace Lead in Water, Wine, and Rice

Determination of Cadmium, Lead and Copper in Water Samples by Flame Atomic-Absorption Spectrometry with Preconcentration by Flow-Injection On-Line Sorbent Extraction.

Determination of Nickel after Online Sorbent Preconcentration by FI-FAAS Using Dimethylglyoxime as a Complexing Agent