Abstract:A simple, environmentally friendly, cost-effective, and sensitive method was developed for the determination of trace lead in tap water by flow injection (FI) on-line unequal flow complexation preconcentration procedure coupled with flame atomic absorption spectrometry (FAAS). Compared with conventional preconcentration method, the unequal flow complexation preconcentration procedure, increased the flow rate of sample while decreased the flow rate of complexing agent. The new method decreased the dilution effect of sample caused by the chelating agent, increased the sorption preconcentration effect, and increased the enhancement factor. The decrease in the flow rate of chelating agent will not result in a deficient complex formation because the concentration of APDC is much higher than that of the sample's. Compared with other sorption preconcentration methods, such as, multiplexed sorption preconcentration procedure, the unequal flow complexation preconcentration procedure need not to prolong the preconcentration time, but received even better results. Taking lead as a model element, ammonium pyrrolidine dithiocarbamate (APDC) as the chelating agent, and ethanol as the eluent, the proposed FI on-line KR unequal flow complexation preconcentration procedure was coupled with FAAS for the determination of trace lead in tap water. With a sample loading flow rate of 10. 4 mL x min(-1) and preconcentration time of 60 s, the enhancement factor increased from 30 (conventional equal flow complexation preconcentration procedure) to 59 (unequal flow complexation preconcentration procedure), the detection limit (3sigma) of 5.6 microg x g L(-1) was obtained at a sampling frequency of 40 samples x h(-1). The relative standard deviations (n = 11) were found to be 2.1% at the level of 0.5 mg x L(-1). The recovery ranged from 98.5% to 102%. The proposed method has been successfully applied to the determination of lead in tap water samples.

Online Flow-Injection Cobalt-Ammonium Pyrrolidin-1-Yldithioformate Coprecipitation for Preconcentration of Trace Amounts of Metals in Waters with Simultaneous Determination by Inductively-Coupled Plasma-Atomic Emission-Spectrometry

A Flow Injection On-Line Unequal Flow Complexation Preconcentration Procedure Coupled with Flame Atomic Absorption Spectrometry for Determination of Lead in Tap Water

On-line Preconcentration and Determination of Trace Metals in Water Samples by Flow Injection Combined with Flame Atomic Absorption Spectrometry via Calix[4]arene Carboxylic Acid Packed Micro-column

Flow Injection On-Line Coprecipitation Preconcentration for Electrothermal Atomic Absorption Spectrometry

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

PRECONCENTRATION OF TRACE COPPER IN WATER SAMPLES WITH FI-SOLVENT EXTRACTION AND AAS

Online Separation and Preconcentration of Trace Heavy Metals with 2,6-Dihydroxyphenyl-diazoaminoazobenzene Impregnated Amberlite Xad-4

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Air mixing sorption flow injection preconcentration in a knotted reactor coupled with flame atomic absorption spectrometry for determination of trace lead in water

A flow injection knotted reactor suction elution method coupled with flame atomic absorption spectrometry for the determination of trace lead and zinc in water

Further Improvement of Flame Atomic Absorption Spectrometric Determination for Cu, Pb and Cd After Preconcentration Using a Rapid Coprecipitation Technique

THE DETERMINATION OF TRACE AMOUNTS OF HEAVY-METALS IN WATERS BY A FLOW-INJECTION SYSTEM INCLUDING ION-EXCHANGE PRECONCENTRATION AND FLAME ATOMIC-ABSORPTION SPECTROMETRIC DETECTION

Preconcentration and Determination of Heavy Metals in Water Samples by Ion Exchange Resin Solid Phase Extraction with Inductively Coupled Plasma Atomic Emission Spectrometry

An Efficient Flow-Injection System with On-Line Ion-Exchange Preconcentration for the Determination of Trace Amounts of Heavy Metals by Atomic Absorption Spectrometry

Simultaneous flow injection preconcentration of lead and cadmium using cloud point extraction and determination by atomic absorption spectrometry

A Pre-Enrichment Procedure Using Diethyldithiocarbamate-Modified TiO2nanoparticles for the Analysis of Biological and Natural Water Samples by ICP-AES

Preconcentration of Trace Elements from Natural Water with Palladium Precipitation

Preconcentration and Determination of Trace Elements with 2-Aminoacetylthiophenol Functionalized Amberlite XAD-2 by Inductively Coupled Plasma–atomic Emission Spectrometry

Flow Injection Semi-online Preconcentration Graphite Furnace Atomic Absorption Spectrometry for Determination of Cadmium,Copper and Manganese

Preconcentration by coprecipitation of arsenic and tin in natural waters with a Ni-pyrrolidine dithiocarbamate complex and their direct determination by solid-sampling atomic-absorption spectrometry

Separation, Preconcentration, and Determination of Lead, Cadmium, and Iron Using Cloud Point Extraction with Flame Atomic Absorption Spectrometry