Abstract:A method using 1,10-phenanthroline (phen) to quantify Fe(II) and total Fe in nonrefractory minerals was modified to improve the accuracy and precision and to eliminate the inconvenience of performing much of the analysis under darkroom conditions. Reagents were combined to minimize solution-handling errors, volumes of the reagent additions were determined gravimetrically and the acid-matrix solution was preheated to near-boiling before sample contact. The darkness requirement, which stems from the photoreduction of Fe(III) to Fe(II) in the presence of phen, was eliminated by the use of opaque amber-colored high-density-polyethylene bottles during the digestion step and for storage of the digestate and subsequent dilutions before Fe(II) analysis. Reduction of Fe(III) for total-Fe analysis was accomplished either by exposure to light from a Hg-vapor lamp or by reaction with hydroxylamine, NH2OH. Although the minimum periods required for adequate reduction ranged from 1.5 to 4 h, the optimum reduction periods were between 6 and 10 h. When standard samples containing Fe(II) and MnCl2 were digested and analyzed for total-Fe using the light treatment (with incidental heating to 35–45 °C), significant decreases and in some instances, oscillations, in absorptivity were obtained. Similar experiments with NH2OH, or with CrCl3 showed no effect. The absorptivity of most digestates stored in opaque bottles was stable for at least 2 weeks, although digestates with Mn concentrations above 3 µg mL−1 showed proportional decreases in absorptivity. Analysis of 8 geochemical reference materials by the modified method (using NH2OH) yielded excellent agreement with published values and a mean relative standard deviation of 0.6%. Total-Fe results obtained using the light treatment, however, were generally lower (∼2% relative) than the NH2OH values, although this difference decreased with longer irradiation periods. Use of NH2OH was deemed preferable because it was simpler, faster, minimized interferences from Mn and eliminated the need for specialized apparatus. Lastly, MICA Fe was shown to be unreliable as a primary reference material for Fe(II) determinations.

A Sensitive Fluorescence Quenching Method For The Determination Of Iron(Ii) With 1,10-Phenanthroline

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

Light-absorption ratio variation approach to sensitive and selective determination of iron with trimethoxyphenylflurone, cetylpyridinium, and thioglycollic acid

Spectral Study of the Interaction Between 2-Pyridinecarbaldehyde-p-phenyldihydrazone and Ferric Iron and Its Analytical Application

Determination of the Bromate in Water Based on 1,10-Phenanthroline Fade-Subtracted the Amount of Fe2+-Spectrophotometry

Iron Determination after On-Line Sorbent Preconcentration by Fi-Fass Using 1, 10-Phenanthroline As a Complexing Agent

A Simple, Sensitive and Selective Spectrophotometric Method for Determining Iron in Water Samples

Fluorescence quenching determination of iron(iii) using rhodamine 6G hydrazide derivative

Colorimetric and fluorimetric dual mode detection of Fe2+ in aqueous solution based on a carbon dots/phenanthroline system

A New Turn-off Fluorescent Chemosensor for Iron (III) Based on New Diphenylfluorenes with Phosphonic Acid

Improvements to the Quantitative Assay of Nonrefractory Minerals for Fe(II) and Total Fe Using 1,10-Phenanthroline

An rhodamine-based fluorescence probe for iron(III) ion determination in aqueous solution.

A Kinetic Spectrophotometric Method for the Determination of Iron （III） in Water Samples

Spectrophotometry for the determination of trace iron in industrial water containing Zn 2+

Direct, Sensitive Determination of Trace Amounts of Dissolved Ferric Iron in Natural Water by Light Absorption Ratio Variation Spectrometry.

Revisiting the Phenanthroline and Ferrozine Colorimetric Methods for Quantification of Fe(II) in Fenton Reactions

Establishment of Heterodinuclear Replacement Complexation and Its Application to Direct Determination of Iron in Natural Water with Dibromo- O -Nitrophenylfluorone

A Ratiometric Fluorescent Probe for Iron(iii) and Its Application for Detection of Iron(iii) in Human Blood Serum.

A colorimetric sensor based on 2,3-bis(6-chloropyridin-2-yl)-6-fluoroquinoxaline for naked-eye detection of Iron (III) and its application in real sample analysis

Ratiometric fluorescence nanoprobe based on carbon dots and terephthalic acid for determining Fe2+ in environmental samples

Speciation of dissolved Fe(II) and Fe(III) in environmental water samples by micro-column packed with N-benzoyl-N-phenylhydroxylamine loaded on microcrystalline naphthalene and determination by electrothermal vaporization inductively coupled plasma-optical emission spectrometry