Abstract:A novel solid phase extraction technique for the speciation of trace dissolved Fe(II) and Fe(III) in environmental water samples was developed by coupling micro-column packed with N-benzoyl-N-phenylhydroxylamine (BPHA) loaded on microcrystalline naphthalene to electrothermal vaporization inductively coupled plasma-optical emission spectrometry (ETV-ICP-OES). Various influencing factors on the separation and preconcentration of Fe(II) and Fe(III), such as the acidity of the aqueous solution, sample flow rate and volume, have been investigated systematically, and the optimized operation conditions were established. At pH 3.0 Fe(III) could be selectively retained by micro-column (20mm×1.4mm, i.d.) packed with BPHA immobilized on microcrystalline naphthalene, and Fe(II) passed through the micro-column. Both Fe(II) and Fe(III) could be adsorbed by the micro-column at pH 6.5. Thus, the total Fe could be determined without the need for preoxidation of Fe(II) to Fe(III). The retained Fe(III) or the Fe(II) and Fe(III) was subsequently eluted by 0.1ml of 1moll−1 HCl. The adsorption capacity of the solid phase adsorption material was found to be 45.0mgg−1 for Fe(III) at pH 3.0 and 65.3mgg−1 for Fe(II) at pH 6.5, respectively. The detection limit (3σ) of 0.053μgl−1 was obtained with a practical enrichment factor of 156 at a sample volume of 17ml. The relative standard deviations of 4.2% and 4.6% (CFe(III)=CFe(II)=10μgl−1, n=7) for Fe(III) and total iron were found, respectively. The method was successfully applied to the determination of trace Fe(II) and Fe(III) in environmental water samples (East Lake water, local tap water and mineral water). In order to validate the method, the developed method was applied to the determination of total iron in certified materials of NIES NO.10-b rice flour and GBW07605 tea leaves, and the results obtained were in good agreement with the certified values.

An Expeditious and Sensitive Microprecipitation Approach Using Chrome Azurol S and Cetyltrimethylammonium Bromide for Visual Detection of Fe(II) and Fe(III) in Water

Direct, Sensitive Determination of Trace Amounts of Dissolved Ferric Iron in Natural Water by Light Absorption Ratio Variation Spectrometry.

Light-absorption ratio variation approach to sensitive and selective determination of iron with trimethoxyphenylflurone, cetylpyridinium, and thioglycollic acid

A Simple, Sensitive and Selective Spectrophotometric Method for Determining Iron in Water Samples

Spectrophotometric and Fluorometric Methods for the Determination of Fe(III) Ions in Water and Pharmaceutical Samples

A Direct and Rapid Method for Determination of Total Iron in Environmental Samples and Hydrometallurgy Using UV–Vis Spectrophotometry

Selective sensing of submicromolar iron(III) with 3,3',5,5'-tetramethylbenzidine as a chromogenic probe.

Colorimetric Detection of Iron (II) Using 4-Mercaptobenzoic Acid and 3,3′,5,5′-Tetramethylbenzidine Modified Silver Nanoparticles

A colorimetric sensor based on 2,3-bis(6-chloropyridin-2-yl)-6-fluoroquinoxaline for naked-eye detection of Iron (III) and its application in real sample analysis

Speciation of dissolved Fe(II) and Fe(III) in environmental water samples by micro-column packed with N-benzoyl-N-phenylhydroxylamine loaded on microcrystalline naphthalene and determination by electrothermal vaporization inductively coupled plasma-optical emission spectrometry

Determination of Chromium(VI), Chromium(III), Arsenic(V), Aluminum(III), Iron(II), and Manganese(II) by Colorimetry and Surface-Enhanced Raman Scattering (SERS) Using Ferulic Acid Functionalized Silver Nanoparticles

A facile fluorescent probe based on anthraldehyde for trace Fe(III) ion determination in neutral aqueous solution

A Highly Selective Colorimetric Chemosensor for Detecting the Respective Amounts of Iron(Ii) and Iron(Iii) Ions in Water

Simple, rapid, portable and quantitative sensing of Fe3+ ions via analyte-triggered redox reactions mediating Tyndall effect enhancement of Au nanoparticles

Highly Selective in Situ Metal Ion Determination by Hybrid Electrochemical “adsorption–desorption” and Colorimetric Methods

A novel ratiometric design of microfluidic paper-based analytical device for the simultaneous detection of Cu2+ and Fe3+ in drinking water using a fluorescent MOF@tetracycline nanocomposite

Solid-phase extraction and color measurement for determination of Fe(Ⅱ) in water

An optical and visual multi-mode sensing platform base on nitrogen, sulfur, boron co-doped carbon dots for rapid and simple determination of ferric ions in water

Adsorptive preconcentration integrated with colorimetry for ultra-sensitive detection of lead and copper

A Kinetic Spectrophotometric Method for the Determination of Iron （III） in Water Samples

Selective Detection Of Fe2+ By Combination Of Cepo4:Tb3+ Nanocrystal-H2o2 Hybrid System With Synchronous Fluorescence Scan Technique