Abstract:The colloidal silica is used as the abrasive for the copper Chemical Mechanical Polishing slurry in integrated circuit multilayer copper wiring. The aggregation of colloidal silica in the slurries tends to aggregate spontaneously, resulting in the continuous changes of the polishing effect, such as scratch defects, removal rate, etc. This situation can lead to the potential instability of the polishing slurry, which should be avoided in industrial production. In this paper, the aggregation and dispersion properties of polishing slurries were systematically studied, and an scheme was proposed to improve the dispersion of slurries to prevent agglomeration. These affecting factors including slurries’ pH, Potassium nitrate and Sodium Polyacrylate were assessed with Large particle counts, Zeta potential and Particle size. Slurry’s pH at 9.6 had a lower Zeta potential which meant a higher dispersion colloidal silica compared to other pH of slurries. And the dissolution of colloidal silica was verified by UV-vis experiment. Sodium dodecyl sulfate, Dodecyl trimethyl ammonium chloride and Primary Alcobol Ethoxylate-15 were analyzed for their dispersion in slurries from the point of view of static electricity and steric hindrance, and the synergistic mechanism of mixed Sodium dodecyl sulfate and Primary Alcobol Ethoxylate-15 on slurries dispersion was highlighted. In addition, the effect of the improvement of slurry dispersion on reducing scratching defects on the surface of polished copper blanket was also tested in this paper.

Polishing Mechanism and Technology of Hard Disk Substrates by Colloidal Silica Alkaline Slurry

Chemical Mechanical Polishing of Computer Hard Disk Substrate in Colloidal Sio2 Slurry

CMP of hard disk substrate using a colloidal SiO2 slurry: preliminary experimental investigation

Chemical mechanical polishing of hard disk substrate with α-alumina-g-polystyrene sulfonic acid composite abrasive

Chemical-Mechanical Polishing of NiP Alloy for Hard Disk Drive Substrates

Preparation of Nanometer SiO2 Slurry and its Polishing Performance on Disk CMP

Influences of Slurry Ingredients on Super-Smooth Surface Polishing of Hard Disk Substrate

Influence of Slurry Ingredients as Particle on Hard Disk Substrate Polishing

Effect of ingredients in slurry containing alumina on chemical mechanical polishing of hard disc substrates

Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy

Effect of Ingredients in Slurry Containing Alumina on Polishing of Hard Disk Substrate

Influence of Slurry as pH Value on Chemical Mechanical Polishing of Glass Substrate for Hard Disks

Nano-deformation of a Ni–P coating surface after nanoparticle impacts

Methods and Mechanistic Analysis of Improving the Dispersion of Nano Silica Colloidal Particles in Chemical Mechanical Polishing Slurries

Optimizing of the Colloidal Dispersity of Silica Nanoparticle Slurries for Chemical Mechanical Polishing

Mechanism and Applications of Chemical and Mechanical Polishing

Research on the Chemical Mechanical Polishing Process of Aluminum Alloy Wafers with Acidic Slurry

Influence of Process Parameters on Material Removal Rate of Hard Disk in Chemical Mechanical Polishing

Chemical Mechanical Polishing of Aluminum Alloys using Alumina-Based Slurry

Preparation of alumina/silica core-shell abrasives and their CMP behavior

High-performance chemical mechanical polishing slurry for aluminum alloy using hybrid abrasives of zirconium phosphate and alumina