Abstract:In this paper, an optimized process for preparation of photosensitive nanosilica from rice husk (RH) is described. The rice husk sample was pretreated by soaking in deionized water to remove most of the alkali metals and partial fixed carbon. Most metal oxides, especially alkaline metal oxides and alkaline-earth metal oxides, were removed to a certain extent after the soaking pre-treatment. Soaking pretreatment may remove the hydrogen bonds or extractives between hemi-cellulose and cellulose, which affects the thermal stability of both molecules. To thoroughly analyze the soaking process, thermogravimetric analysis (TGA) was performed to obtain the mass loss behavior of soaked rice husk. The characteristics of the nanosilica prepared from the method described in this paper are superior to those of fumed silica. The silica content of the nanosilica reached a record of 99.92% in pyrolysis method. The optimum preparation conditions were as follows: a rice husk feedstock particle size of between 250 and 420 mu m, a pyrolysis temperature of approximately 610 degrees C, a hydrolysis temperature of 120 degrees C, a 1:10 (g/ml) ratio of rice husk to acid, a hydrolysis time of 4 h, and a hydrochloric acid (HCI) concentration of 8% (wt.%). A detailed study of the effects of the pyrolysis temperature and feedstock particle size was conducted, filling the gap in systematic research on the nanosilica preparation process using the pyrolysis method. The complete process of pyrolysis for pretreated rice husk is described, including the decomposition of the major constituents, volatilization of gases and the formation of silica. The results of this study provide a deep understanding of nanosilica production by pyrolyzation. The prepared nanosilica is photosensitive and approximately spheroidal with an average particle size of approximately 8-10 nm. (C) 2013 Elsevier B.V. All rights reserved.

Effects of Synthesis Parameters on Silicon Nanopowders Produced by CO2 Laser‐Driven Pyrolysis of Silane

The Effects of Processing Parameters on the Properties of Micro-Scale Porous Surface for a Micro-Channel Reactor

A parametric study of non-thermal plasma synthesis of silicon nanoparticles from a chlorinated precursor

Fabrication of Silicon Carbide Nanoparticles Using Pulsed Laser Ablation in Liquid and Viscosity Optimization via Solvent Tuning

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

The Effect of Silane Flow Rate on Nano-Silicon Powder Production by Silane Thermal CVD

Investigation of ablation efficiency and properties of silicon carbide nanoparticles synthesised using pulsed laser ablation in liquid

Morphology Control of Si-Based Nanostructures by Catalyst-Assisted Pyrolysis of Preceramic Precursors

A Detailed Study of the Effects of Pyrolysis Temperature and Feedstock Particle Size on the Preparation of Nanosilica from Rice Husk

Synthesis of Ultrafine Silicon Carbide Nanoparticles Using Nonthermal Arc Plasma at Atmospheric Pressure

Synthesis and characterization of submicron silicon carbide powders with silicon and phenolic resin

Nanometer-sized silicon particles prepared by laser vaporization and their photoluminescence

Fabrication of ultra-small SiC nanoparticles with adjustable size, stoichiometry and photoluminescence by AC multi-arc plasmas

Syntheses and Growth Mechanisms of 3C-Sic Nanostructures from Carbon and Silicon Powders.

Effects of Parameters in Femtosecond Laser Micromachining on Ablation of Silicon

Preparation of Nanoporous Silicon and Study on Its Properties

Research of Silicon Nitride Powder Prepared by Self-propagating High-temperature Synthesis

Ytterbium femtosecond fiber laser ablation synthesis of silicon nanocrystals in water: Laser frequency and pulse energy dependence

Synthesis of spherical SiO2 powders from water glass and colloidal Sol through ultrasonic spray pyrolysis

Growth and Mechanism of Network‐Like Branched Si3N4 Nanostructures

Investigation on Combustion of Porous Silicon Nanoenergetic Chips Ignited by Single Pulse Laser