Abstract:Nanofillers are added to polymeric insulating materials in order to modify the electrical, mechanical and thermal properties. This study investigates silicone rubber filled with hydrophilic and hydrophobic silica nanoparticles with respect to their resistance to laser ablation and to arc discharges, as well as their mechanical properties. The laser ablation is performed with single femtosecond laser pulses at wavelengths of 520 nm and 1040 nm. This way, the influence of the nanoparticles on the ablation by laser pulses with defined energy is investigated. The energy absorbed in the ablated volume is determined by taking into account the absorption for various fluences above the ablation threshold. For the silica nanocomposites, the energy specific ablation volume (ESAV), i.e., the ablated volume per absorbed energy, is significantly reduced compared to the unfilled polymer. The reduction is more pronounced for hydrophilic nanoparticles than for hydrophobic nanoparticles. Furthermore, the resistance to arc discharges and the mechanical strength of the nanocomposites are higher compared to the unfilled polymer. In particular, for nanocomposites with different types of silica filler particles the resistance to laser ablation, expressed by the ESAV, the resistance to arc discharges and the mechanical strength, expressed by Shore A hardness and the Young's modulus, show a strong correlation. From this, it is concluded that the modifications of the material properties are caused by interactions between the polymer and the nanoparticle surface, i.e., an interphase. The different extent of this interphase becomes obvious in the different degrees of impact on various electrical and mechanical properties.

Fabrication of Silicon Carbide Nanoparticles Using Pulsed Laser Ablation in Liquid and Viscosity Optimization via Solvent Tuning

Investigation of ablation efficiency and properties of silicon carbide nanoparticles synthesised using pulsed laser ablation in liquid

Investigation of potential of vacuum-free femtosecond laser sintering for direct printing using silicon carbide nanoparticles without inorganic binder

Resonant Optical Properties of Crystalline Silicon Nanoparticles Fabricated by Laser Ablation-Based Methods

Suppression of the Coffee Ring Effect in a Single Solvent-Based Silicon Nanoparticle Ink

Fabrication of 4H–SiC nanoparticles using femtosecond pulsed laser ablation in deionized water

Ytterbium femtosecond fiber laser ablation synthesis of silicon nanocrystals in water: Laser frequency and pulse energy dependence

Effect of bimodal particle size distribution on the performance of SiC slurry for maskless vat photopolymerization

Effects of Synthesis Parameters on Silicon Nanopowders Produced by CO2 Laser‐Driven Pyrolysis of Silane

A coating of silane modified silica nanoparticles on PET substrate film for inkjet printing

Synthesis Of Sic-Si3n4 Composite Nanoparticles By Laser-Induced Chemical Deposition

Preparation and optimization of silicon nitride slurries for digital light processing

Influence of Silicon Carbide on Direct Powder Bed Selective Laser Process (Sintering/Melting) of Alumina

Study on Rheological Behavior of Micro/Nano-Silicon Carbide Particles in Ethanol by Selecting Efficient Dispersants

Fabrication and functional characteristics of micro/nano structures on the RB-SiC surface through nanosecond pulsed laser irradiation

Real-time monitoring and control for high-efficiency autonomous laser fabrication of silicon nanoparticle colloids

Effect of Sonication and Ceria Doping on Nanoparticles Fabricated by Laser Marker Ablation of Ti in Water

Impact of viscosity of liquid on nanoparticles synthesized by laser ablation in liquid: An experimental and theoretical investigation

Controllable reduction of absorbance and two-step reaction for 3D-printed SiC ceramics with micron-level periodic structure

Laser Ablation of Silicon Nanoparticles and Their Use in Charge-Coupled Devices for UV Light Sensing via Wavelength-Shifting Properties

Characterization of Nanocomposites Based on Silicone Rubber by Ultrashort Pulse Laser Ablation