Abstract:Proton-conducting ceramic cells are promising devices for high-efficient energy conversion, while the preparation of defect-free electrolyte membranes is difficult and blocks their quick development. Here, a vacuum-assistant dip-coating method is developed to prepare defect-free BaCe0.4Zr0.4Y0.1Yb0.1O3-δ (BCZYYb4411) proton-conducting electrolyte membranes on porous anode (40 wt%BCZYYb4411 - 60 wt%NiO) substrates. Unlike the conventional dip-coating process, by using the vacuum-assistant dip-coating method, defects (like running through pinholes, cracks) that would cause gas leakage, short-circuit and low open-circuit voltage (OCV) in following electrochemical tests can be eliminated. By tuning the mass concentration of electrolyte powders in the coating slurry, thin electrolyte membranes with different thicknesses can be reproducibly prepared. Proton-conducting fuel cells (PCFCs) with BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY0.1) cathode show high OCV values closing to the theoretical value of 1.13 V at 600 °C, demonstrating that dense and defect-free electrolyte membranes are fabricated. The as-prepared PCFC with a 10-μm-thickness defect-free electrolyte membrane shows a high peak power density reaching up to 761 mW cm−2 at 650 °C and stability of more than 250 h at the current density of 200 mA cm−2 at 600 °C. All these results illustrate that the developed method is feasible to prepare dense and thin electrolyte membranes without defects for proton-conducting ceramic cells.

Preparation of BaZr0.1Ce0.7Y0.2O3−δ Thin Membrane Based on a Novel Method-Drop Coating

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Fabrication and Characterization of Anode-Supported Dense BaZr0.8Y0.2O3 − Δ Electrolyte Membranes by a Dip-Coating Process

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Fabrication and Performance of BaCe0.8Y0.2O3−δ–BaZr0.8Y0.2O3−δ Bilayer Electrolyte for Anode-Supported Solid Oxide Fuel Cells

Stable BaCe0.5Zr0.3Y0.16Zn0.04O3−δ Thin Membrane Prepared by in Situ Tape Casting for Proton-Conducting Solid Oxide Fuel Cells

High performance of anode supported BaZr0.1Ce0.7Y0.2O3−δ(BZCY) electrolyte cell for IT-SOFC

Preparation, characterization and application of BaZr0.1Ce0.7Y0.2O3-δ for a high-performance and stable proton ceramic electrochemical cell

Chemically Stable BaZr0.7Pr0.1Y0.2O3-δ-BaCe0.8Y0.2O3-δ Bilayer Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Interfacial Modification for High-Efficient Reversible Protonic Ceramic Cell with a Spin-Coated BaZr0.1Ce0.7Y0.2O3-δ Electrolyte Thin Film

Enhanced Electrochemical Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Cathode by Zr4+, Sm3+ and Yb3+ Tri-Doped BaCeO3 Compositing for Intermediate-Temperature Thin-Film Fuel Cells

Repeatable preparation of defect-free electrolyte membranes for proton-conducting fuel cells

Enhancing the sinterability and electrical properties of BaZr<sub>0.1</sub>Ce<sub>0.7</sub>Y<sub>0.2</sub>O<sub>3-</sub>proton-c onducting ceramic electrolyte

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

Enhanced Performance of Protonic Solid Oxide Steam Electrolysis Cell of Zr-Rich Side BaZr0.6Ce0.2Y0.2O3-δ Electrolyte with an Anode Functional Layer

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte

In Situ Screen-Printed BaZr0.1Ce0.7Y0.2O3−δ Electrolyte-Based Protonic Ceramic Membrane Fuel Cells with Layered SmBaCo2O5+x Cathode

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode