Abstract:In recent years, metallic nano-light-emitting diode (LED) arrays have gained wide attention as new-generation lighting materials. This study evaluates the optical properties of triangular array Ag nanodisc GaN-LED and analyses its effects on internal radiation and external light extraction of LED by changing the cycle and height of the Ag nanodisc. We use FDTD software for simulation. The results showed that the increase in the spontaneous emission rate depended on the localised surface plasmon (LSP) generated by the Ag nanodisc and the multiple quantum well layer, considering the coupling between the surface plasmon and the dipole enhanced the internal energy. Owing to the optimal structural parameters, the spontaneous emission rate was enhanced by 4.79 times, and the power integral of the internal radiation source increased from 0.037 to 0.177. Furthermore, the enhanced energy from coupling did not radiate outward and was limited to the surface of the Ag nanodisc. Additionally, a two-dimensional photonic crystal structure was embedded in the p-layer to transform the LSP into a radiation plasmon. When the transmittance was 0.32, the top surface power integral increased from 0.021 to 0.131, light output power increased by 5.47 times, and the factor of light extraction efficiency increased by 1.79 times. These results provide practical values that can be applied in optimising the design of high-performance GaN-based LED.

Enhanced Light Emission of Light-Emitting Diodes with Silicon Oxide Nanobowls Photonic Crystal Without Electrical Performance Damages

Selectively Grown Photonic Crystal Structures for High Efficiency InGaN Emitting Diodes Using Nanospherical-Lens Lithography

Light Extraction Improvement of InGaN Light-Emitting Diodes with Large-Area Highly Ordered ITO Nanobowls Photonic Crystal Via Self-Assembled Nanosphere Lithography

Enhanced Output Power of Light-Emitting Diodes with Embedded Air-Gap Photonic Crystals by Nanosphere Lithography

Large-Scale Sio2 Photonic Crystal for High Efficiency Gan Leds by Nanospherical-Lens Lithography

Enhanced Light Extraction of InGaN LEDs with Photonic Crystals Grown on P-Gan Using Selective-Area Epitaxy and Nanospherical-Lens Photolithography

Enhancement in the Light Output Power of Gan-Based Light-Emitting Diodes with Nanotextured Indium Tin Oxide Layer Using Self-Assembled Cesium Chloride Nanospheres

Enhanced Optical Power of GaN-based Light-Emitting Diode with Compound Photonic Crystals by Multiple-Exposure Nanosphere-Lens Lithography

III-nitride ultraviolet, blue and green LEDs with SiO2 photonic crystals fabricated by UV-nanoimprint lithography

Enhancement of Performance of GaN-based Light-Emitting Diodes by Insertion and Optimization of N-Ingan/gan Composite Current-Spreading Layers

High-output power GaN-LED based on surface plasmon enhancement

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Size-controllable Nanopyramids Photonic Crystal Selectively Grown on P-Gan for Enhanced Light-Extraction of Light-Emitting Diodes.

Light Emission Of 2d Photonic Crystal Based On Nanocrystal-Si/Sio(2) Superlattice Structure

Enhancement of the light output of GaN-based light-emitting diodes using surface-textured indium-tin-oxide transparent ohmic contacts.

A Study of LED with Surface Photonic Crystal Structure Fabricated by the Nanoimprint Lithography

GaN-based light-emitting diodes with photonic crystals structures fabricated by porous anodic alumina template.

Light Extraction Enhancement of InGaN Based Micro Light-Emitting Diodes with Concave-Convex Circular Composite Structure Sidewall

Improvement of GaN Light-Emitting Diodes with Surface-Treated Al-doped ZnO Transparent Ohmic Contacts by Holographic Photonic Crystal

Enhanced External Quantum Efficiency of Light Emitting Diodes by Fabricating Two-Dimensional Photonic Crystal Sapphire Substrate with Holographic Technique

Enhancing Optical Power Of Gan-Based Light-Emitting Diodes By Nanopatterning On Indium Tin Oxide With Tunable Fill Factor Using Multiple-Exposure Nanosphere-Lens Lithography