Abstract:In this article, Y2O3-reinforced tungsten composites are fabricated by using an improved wet chemical method combined with the spark plasma sintering (SPS). Triethanolamine (TEA) surfactant addition and an appropriate calcination process are innovatively introduced into this wet chemical method. The results show that ultrafine composite powders with nano-sized Y2O3 dispersions in the tungsten matrix can be obtained through the improved wet chemical method. Using the SPS, the average sizes of Y2O3 particles within tungsten grains and at grain boundaries are identified to be 13.5 and 50 nm, respectively. It is found that the phase interface between W and Y2O3 is a typical semicoherent interface. We observe that the W-Y2O3 composites possess superior mechanical properties compared with the pure tungsten counterparts. The results inferred from atomistic simulations reveal that the added Y2O3 particles can effectively pin the dislocation and impede the dislocation movement, thus enhancing the mechanical performances of W-Y2O3 composites. In addition, the addition of Y2O3 particles is also able to improve the helium ion irradiation resistance of tungsten-based composites. This study is expected to provide a certain reference for the manufacture of large-sized tungsten-based materials.

Chemically Produced Tungsten–praseodymium Oxide Composite Sintered by Spark Plasma Sintering

Microstructure and Properties of Tungsten–samarium Oxide Composite Prepared by a Novel Wet Chemical Method and Spark Plasma Sintering

Mechanical Properties and Thermal Shock Performance of W-Y2O3composite Prepared by High-Energy-rate Forging

Effect of Doped Lu2o3 on the Microstructures and Properties of Tungsten Alloy Prepared by Spark Plasma Sintering

Microstructure and Properties of W/Sm2O3 Composites Prepared Spark Plasma Sintering

Preparation and Characteristics of W–1 Wt.% TiC Alloy Via a Novel Chemical Method and Spark Plasma Sintering

Chemical Synthesis and Oxide Dispersion Properties of Strengthened Tungsten Via Spark Plasma Sintering

Development of Tungsten-Based Materials by Different Sintering Techniques

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Fabrication of W–1 Wt.% TiC Composites by Spark Plasma Sintering

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement

The superior thermal stability and irradiation resistance capacities of tungsten composites synthesized by simple second-phase particle component modulation

Mechanical Properties of a Novel Tungsten Fiber-Reinforced Tungsten Composite Prepared Through Powder Extrusion Printing and High-Pressure High-Temperature Sintering

Synthesis of W-TiC composite powders by wet-chemical process and its sintering behavior by SPS

Effects of Preparation Conditions on the Structural and Optical Properties of Spark Plasma‐Sintered PLZT (8/65/35) Ceramics

Pyroelectric Ceramics in PbZrO<sub>3</sub>-PbTiO<sub>3</sub>-Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub> System Prepared with Spark Plasma Sintering Technique

Change in compositional fluctuation in Pb(Zr<SUB>x</SUB>Ti<SUB>1</SUB>−x)O<SUB>3</SUB> solid solution during spark plasma sintering

Microstructure and Properties of La2O3 Doped W Composites Prepared by a Wet Chemical Process

Characterization of W-Er2O3 alloy prepared by co-deposition method and spark plasma sintering

An investigation of the peculiarities of high-speed sintering of plasma chemically synthesized tungsten carbide nanopowders with increased oxygen content

Zirconia-Mullite Obtained from Co-Precipitated Zirconia-Mullite Composite Powders by Sps