Abstract:In this study, tungsten heavy alloys reinforced with highly uniform and dispersed nanosized Zr(Y)O2 particles were investigated. These alloys exhibited a high compressive strength and enhanced plasticity. To fabricate these alloys, we used a novel process involving molecular level liquid-liquid doping combined with hot isostatic pressing. The Zr(Y)O2 particles thus produced were smaller than 200 nm in size and bonded well with tungsten grains. The size of Zr(Y)O2 particles and tungsten grains are much smaller than those of the state-of-the-art review and the details of the grain refinement mechanisms were discussed. The effect of Zr(Y)O2 particles and strain rate on the compressive properties of the alloys was investigated in detail and the corresponding compressive deformation mechanisms were elucidated. The highest ultimate tensile and compressive strengths of the fabricated alloys at room temperature (27 °C) were 906 and 1445 MPa, respectively, which are higher than most of reported values in the literature. The ultimate tensile strength and fracture strain of WHAs decrease with the mass fraction of Zr(Y)O2 (from 0% to 0.75%). The alloys exhibit the brittle material behaviour in tension, compared to the pure tungsten with ductile material behaviour. The tensile fracture surface consists of W - W cleavage patterns and ductile failure of the matrix. The results obtained in this research will act as basic guidelines for the fabrication of ODS-W alloys by liquid-liquid doping process.

The superior thermal stability and irradiation resistance capacities of tungsten composites synthesized by simple second-phase particle component modulation

Mechanical Properties and Thermal Shock Performance of W-Y2O3composite Prepared by High-Energy-rate Forging

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement

The Effect of Y2O3 Particles on the Microstructure and Mechanical Properties of Tungsten Fiber-Reinforced Tungsten Composites

Microstructural Evolution and Thermal Fatigue Damage Mechanism of Second-Phase Dispersion Strengthened Tungsten Composites under Repetitive Thermal Loads

Superior Radiation Resistance of ZrO2-Modified W Composites

Preparation and Properties of Fine-Grained and Ultrafine-Grained W-TiC-Y2O3 Composite

Combined Effect of Laser Thermal Shock and Helium Ion Irradiation on W-Y2O3 Composites

Effect of Y2O3 particles on the helium ion irradiation damage of W-2%Y2O3 composite prepared by wet chemical method

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Enhanced thermal-mechanical properties of rolled tungsten bulk material reinforced by in situ nanosized Y–Zr–O particles

Effects of zirconium element on the microstructure and deuterium retention of W–Zr/Sc 2 O 3 composites

Evaluating surface damage behavior of W-(Y0.9La0.1)2O3 composites during spark plasma sintering process improvement

Microstructure characterization and properties of YSZ particles doped tungsten alloy prepared by liquid phase method

Extremely uniform nanosized oxide particles dispersion strengthened tungsten alloy with high tensile and compressive strengths fabricated involving liquid-liquid method

Microstructure and mechanical properties of Wf/W composites influenced by Y2O3 coating

Mechanical Properties and Thermal Stability of W-ZrC/HfC-Re Alloys Fabricated by Spark Plasma Sintering

Novel low temperature derived W f /W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties

Transient thermal shock behavior of W–Zr/Sc2O3 composites prepared via spark plasma sintering

Nanostructured TiC Dispersion-Strengthened Tungsten Composite with Remarkably Improved He Ion Irradiation Resistance

Microstructure and Performances of W–TiC–Y2O3 Composites Prepared by Mechano-Chemical and Wet-Chemical Methods