Abstract:It is always a great challenge to manufacture defect-free and high-performance pure tungsten by laser additive manufacturing until now. In this work, using nanopowder as precursors, the pure tungsten green parts were successfully manufactured by indirect additive manufacturing technology, powder extrusion printing. The subsequent debinding-sintering process of the green parts has been optimized to obtain high-relative-density, fine-grain and defect-free tungsten samples. The relative density of the sample increased with the increase of sintering temperature. The microstructures of pure tungsten prepared by direct and indirect additive manufacturing techniques were studied comparatively, including laser powder bed fusion and powder extrusion printing. The formation of microcracks in pure tungsten samples is mainly due to the high residual stress provided by laser powder bed fusion and the high ductile-to-brittle transition temperature characteristics of tungsten. The sintering temperature of the pure tungsten samples with the highest compressive strength (1290 ± 10 MPa) was determined to be 2000 °C. Compared with other sintered samples, defect-free samples sintered at 2000 °C had finer grains (9.8 μm) while maintaining high relative density (99.1 ± 0.4%). The higher strength of the sintered samples at 2000 °C is related to the fine-grain strengthening and high relative density compared to samples obtained from other direct additive manufacturing technologies and sintered at other temperatures. The indirect additive manufacturing technique based on the use of nanopowder precursors developed in this work provides a new technical approach for the additive manufacturing of high-performance tungsten and/or other refractory metals.

Ultra-high Purity Tungsten and Its Applications

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

High-pressure Preparation of Bulk Tungsten Material with Near-Full Densification and High Fracture Toughness

Large-Size and Ultrahigh Purity Tungsten with Enhanced Physical Properties via Chemical Vapor Deposition

Hydrogen arc plasma promotes the purification and nanoparticle preparation of tungsten

High FE current density from tungsten oxide nanowires

Simple Approaches To Quality Large-Scale Tungsten Oxide Nanoneedles

Preparation of high-density and excellent bending strength pure tungsten target by hot oscillatory pressing sintering and its magnetron sputtering coating

Ultrafine Grain Tungsten Heavy Alloys with Excellent Performance Prepared by Spark Plasma Sintering

Ultrafine-Grained Tungsten Heavy Alloy Prepared by High-Pressure Spark Plasma Sintering

Ultra-fine Grained/Nano-crystalline Tungsten-Plasma Facing Material for Future Fusion Reactors

Purificationand Cleaning of Spongy Tungsten Disc Used As Impregnated Dispenser-Cathode in Vacuum

Preparation of Ultrafine Tungsten Wire Via Electrochemical Method in an Ionic Liquid

Microstructure and properties of liquid-phase sintered tungsten heavy alloys by using ultra-fine tungsten powders

On the fabrication of ultrafine-grained potassium-doped tungsten: Mechanical milling and spark plasma sintering of K-doped W powder prepared by evaporation-condensation method

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Achieving high-performance pure tungsten by additive manufacturing: Processing, microstructural evolution and mechanical properties

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: an Overview

Simulation and Experimental Investigation on Additive Manufacturing of Highly Dense Pure Tungsten by Laser Powder Bed Fusion

Research on Sintering Process for Different Shaped Products of Pure Tungsten by Hollow Cathode Discharge

Effect of Surface Quality on Hydrogen/helium Irradiation Behavior in Tungsten