Abstract:In the present work, the feasibility and effectiveness of fabricating La2O3-doped W-based bulk using W-based composite powders of core-shell structure with W particle as a core and La(OH)3 as a shell, without hydrogen reduction treatment, was evaluated. La(OH)3 was first coated on the surface of pure W (uncoated) powders at a weight percentage of 3.50% to prepare composite (coated) powders using the electroless plating method. The uncoated and coated powders without being treated by hydrogen reduction were then sintered using spark plasma sintering (SPS) to fabricate bulks. The results showed that the core-shell structure with W particle as a core and La(OH)3 film as a shell was fabricated. La2O3-doped W-based bulk with about 2.93 wt.% La2O3 was obtained because of the transformation from La(OH)3 to La2O3. The La2O3 particles with larger sizes were distributed mainly at W grain boundaries and those with smaller sizes were distributed mainly inside W grains. The major densification mechanism of the sintered bulk from coated powders was the filling effect of La2O3 particles on the pores as compared with the sintered bulk from uncoated powders, which could be evaluated by using a two-ball sintering neck model. The relative content of O in the form of WO3 in the sintered bulk from coated powders was identical to that in the sintered bulk from uncoated powders. The W grain size of the sintered bulk from coated powders was smaller than that of the sintered bulk from uncoated powders. The thermal properties, mechanical properties, and irradiation properties of the sintered bulk from coated powders were all higher than those of the sintered bulk from uncoated powders. With the increase of sintering temperature, the evolution of the coated powders in the initial sintering period could be divided into six stages that were not completely independent and occurred in approximate sequence from the perspective of simplification. It was feasible and effective to fabricate La2O3-doped W-based bulk using the precursor W-based composite powders of core-shell structure with W particle as a core and La(OH)3 as a shell without being treated by hydrogen reduction.

Study on activated W powders by chemical activation pretreatment and its sintering behavior

Activation Pretreatment of W-1.5wt％TiC Composite Powder and Its Sintering Behavior

High-pressure Preparation of Bulk Tungsten Material with Near-Full Densification and High Fracture Toughness

Development of Tungsten-Based Materials by Different Sintering Techniques

Preparation of Nanocrystalline Tungsten Powder and Study of Its Sinterability

The effects of SiC addition on the sintering densification, phases, microstructure and mechanical properties of W

Synthesis of W-TiC composite powders by wet-chemical process and its sintering behavior by SPS

Microstructure and Properties of La2O3-doped Tungsten-Based Bulk Material and Its Densification Mechanism During Spark Plasma Sintering Process

Evaluating surface damage behavior of W-(Y0.9La0.1)2O3 composites during spark plasma sintering process improvement

Effects of Simplified Pretreatment Process on the Morphology of W–Cu Composite Powder Prepared by Electroless Plating and Its Sintering Characterization

Preparation and Characterization of W-Sc2O3 Targets by Spark Plasma Sintering

Effect of Nanocrystalline Tungsten Powders on the Microstructure and Properties of Liquid-Phase Sintered 93W Alloys

Effect of Doped Lu2o3 on the Microstructures and Properties of Tungsten Alloy Prepared by Spark Plasma Sintering

Chemical Synthesis and Oxide Dispersion Properties of Strengthened Tungsten Via Spark Plasma Sintering

Effect of ZrC nano-powder addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Microstructure and Performances of W–TiC–Y2O3 Composites Prepared by Mechano-Chemical and Wet-Chemical Methods

Achieving high-performance pure tungsten by additive manufacturing: Processing, microstructural evolution and mechanical properties

Preparation and organization of W-Ni/TiC composite material

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement