Abstract:H doping can enhance the performance of ZnO thin-film transistors (TFTs) to a certain extent, and the design of double active layers is an effective way to further improve a device’s performance. However, there are few studies on the combination of these two strategies. We fabricated TFTs with ZnO:H (4 nm)/ZnO (20 nm) double active layers by magnetron sputtering at room temperature, and studied the effect of the hydrogen flow ratio on the devices’ performance. ZnO:H/ZnO-TFT has the best overall performance when H2/(Ar + H2) = 0.13% with a mobility of 12.10 cm2/Vs, an on/off current ratio of 2.32 × 107, a subthreshold swing of 0.67 V/Dec, and a threshold voltage of 1.68 V, which is significantly better than the performance of single active layer ZnO:H-TFTs. This exhibits that the transport mechanism of carriers in double active layer devices is more complicated. On one hand, increasing the hydrogen flow ratio can more effectively suppress the oxygen-related defect states, thus reducing the carrier scattering and increasing the carrier concentration. On the other hand, the energy band analysis shows that electrons accumulate at the interface of the ZnO layer close to the ZnO:H layer, providing an additional path for carrier transport. Our research exhibits that the combination of a simple hydrogen doping process and double active layer construction can achieve the fabrication of high-performance ZnO-based TFTs, and that the whole room temperature process also provides important reference value for the subsequent development of flexible devices.

P‐15: High‐Performance Fully Transparent Hafnium‐Doped Zinc Oxide TFTs Fabricated at Low Temperature

High-performance Si-doped ZnO Thin-film Transistors Fabricated on Flexible Plastic Substrate at Low Temperature

Fully-transparent Mo-doped ZnO TFTs fabricated in different oxygen partial pressure at low temperature

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

Effects of various oxygen partial pressures on Ti-doped ZnO thin film transistors fabricated on flexible plastic substrate

High-performance Ti-doped zinc oxide TFTs with double-layer gate dielectric fabricated at low temperature

High-performance transparent AZO TFTs fabricated on glass substrate

Flexible Nickel-Doped Zinc Oxide Thin-Film Transistors Fabricated On Plastic Substrates At Low Temperature

Fully transparent flexible tin-doped zinc oxide thin film transistors fabricated on plastic substrate

Low-Temperature Fabrication of Fully Transparent Igzo Thin Film Transistors on Glass Substrate

High-performance dual-layer channel ITO/TZO TFTs fabricated on glass substrate

Transparent gallium doped zinc oxide thin-film transistors fabricated on glass substrate

Low-Temperature ZnO TFTs Fabricated by Reactive Sputtering of Metallic Zinc Target

P‐1.8: High Performance ZnO Thin Film Transistors on Flexible Substrate with Process Temperature No More Than 100 °C

Effects of Substrate Temperature on Performance of Calcium-Doped Zinc Oxide Tfts

High performance reactive sputtering deposited ZnO thin-film transistors on transparent substrate

High-Performance ZnO Thin-Film Transistors Prepared by Atomic Layer Deposition

Effects of channel thickness on characteristics of HZO-TFTs fabricated at low temperature

High-Performance Thin-Film Transistors with ZnO:H/ZnO Double Active Layers Fabricated at Room Temperature

High–performance Fully–transparent Ni–doped ZnO Thin–film Transistors Fabricated on Flexible Plastic Substrate at Low Temperature

High-performance fully transparent Ga-doped ZnO TFTs fabricated by RF Magnetron Sputtering