Abstract:Micro-electro-mechanic-system (MEMS) devices on flexible substrate are important for non-planar and non-rigid surface applications. In this paper, a novel and cost-effective fabrication process for an 8×8 MEMS temperature sensor array with a lateral dimension of 2.5mm×5.5mm on a polyimide flexible substrate is developed. A 40μm thick polyimide substrate is formed on a rigid silicon wafer using as a mechanical carrier throughout the fabrication by four successive spin coating liquid polyimide. The arrayed temperature sensing elements made of 1200Å sputtered platinum thin film on polyimide substrate show excellent linearity with a temperature coefficient of resistance of 0.0028/°C. The purposed sensor obtains a high sensitivity of 0.781Ω/°C at 8mA at constant drive current. Because of the low heat capacity and excellent thermal isolation, the temperature sensing element shows excellent high sensitivity and a fast thermal response. The finished devices are flexible enough to be folded and twisted achieving any desired shape and form. Employing spin-coated liquid polyimide substrate instead of solid polyimide sheet minimizes the thermal cycling as well as improves the production yield. This fabrication technique first introduces the spin-coated PDMS (Polydimethylsiloxane) interlayer between the silicon carrier and the polyimide substrate and makes the polyimide-based devices separate much easier and greatly simplifies the fabrication process with a high production yield. A non-successive two-stage cure procedure for the polyimide precursor is developed to meet low-temperature requirement of the PDMS interlayer. The fabrication procedure developed in this research is compatible with conventional MEMS technology through an optimized integration process. The novel flexible MEMS technology can benefit the development of other new flexible polyimide-based devices.

Low Temperature Photosensitive Polyimide Based Insulating Layer Formation for Microelectromechanical Systems Applications

Low-stress Photosensitive Polyimide Suspended Membrane for Improved Thermal Isolation Performance

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

Key Technology of Micromachined Temperature Sensor Arrays on Polyimide Flexible Substrates

An Investigation into Polyimide Sacrificial Layer for RF/MW MEMS Switch

Study of Polyimide As Sacrificial Layer with O-2 Plasma Releasing for Its Application in Mems Capacitive Fpa Fabrication

Development and Performance Test of the Adhesion for the Low Temperature Bonding Between Si and Polyimide

&Lt;title>research for Polyimide As a Sacrificial Layer in MEMS Device</title>

A cost-effective flexible MEMS technique for temperature sensing

Investigation of Photosensitive Polyimide With Low Coefficient of Thermal Expansion and Excellent Adhesion Strength for Advanced Packaging Applications

Research on Photosensitive Polyimide Sacrificial Layer

An ultra heat-resistant polyimide formulated with photo-base generator for alkaline-developable, negative-type photoresist

A Temperature Sensor Array Based on Flexible MEMS Skin Technology

Low-thermal-budget electrically active thick polysilicon for CMOS-First MEMS-last integration

Investigating the structure–sensitivity relationship of photosensitive polyimide formulated by using a photobase generator

A Strategy to Prepare Low-Temperature Curable Photosensitive Polyimide with Good Comprehensive Performance

Synthesis and Characterization of Negative-Tone Photosensitive Polyimides with Low Coefficient of Thermal Expansion for Packaging Applications

A Novel Method Of Removing Polyimide Sacrificial Layer

Progress on the research and application of low-temperature curable photosensitive polyimides for microelectronic packaging

Fabrication of a Flexible Polyimide-Based Electrostatically Actuated MEMS Relay

Poly-SiGe-Based MEMS Thin-Film Encapsulation