Abstract:Micro-electro-mechanic-system (MEMS) devices on flexible substrate are important for non-planar and non-rigid surface applications. In this paper, a novel and cost-effective fabrication process for an 8×8 MEMS temperature sensor array with a lateral dimension of 2.5mm×5.5mm on a polyimide flexible substrate is developed. A 40μm thick polyimide substrate is formed on a rigid silicon wafer using as a mechanical carrier throughout the fabrication by four successive spin coating liquid polyimide. The arrayed temperature sensing elements made of 1200Å sputtered platinum thin film on polyimide substrate show excellent linearity with a temperature coefficient of resistance of 0.0028/°C. The purposed sensor obtains a high sensitivity of 0.781Ω/°C at 8mA at constant drive current. Because of the low heat capacity and excellent thermal isolation, the temperature sensing element shows excellent high sensitivity and a fast thermal response. The finished devices are flexible enough to be folded and twisted achieving any desired shape and form. Employing spin-coated liquid polyimide substrate instead of solid polyimide sheet minimizes the thermal cycling as well as improves the production yield. This fabrication technique first introduces the spin-coated PDMS (Polydimethylsiloxane) interlayer between the silicon carrier and the polyimide substrate and makes the polyimide-based devices separate much easier and greatly simplifies the fabrication process with a high production yield. A non-successive two-stage cure procedure for the polyimide precursor is developed to meet low-temperature requirement of the PDMS interlayer. The fabrication procedure developed in this research is compatible with conventional MEMS technology through an optimized integration process. The novel flexible MEMS technology can benefit the development of other new flexible polyimide-based devices.

A Novel Method Of Removing Polyimide Sacrificial Layer

Study of Polyimide As Sacrificial Layer with O-2 Plasma Releasing for Its Application in Mems Capacitive Fpa Fabrication

Fast MEMS Releasing with Polymer and Nano-Graphite Particle Additive

Polyimide sacrificial layer for micromachining

Polyimide-Damage-Free, CMOS-Compatible Removal of Polymer Residues from Deep Reactive Ion Etching Passivation

An innovative methodology for monitoring the sacrificial layer removal process in MEMS structures

The Sacrificial Layer Releasing of Micro-Machined Optical-Fiber Switch with Poly-Si Torsion Mirror

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

Experimental Investigations Of Porous Silicon Sacrificial Layer Techniques On Mems

A Surface Micromachining Process Utilizing Dual Metal Sacrificial Layer for Fabrication of RF MEMS Switch

A New Release Process for Polysilicon Surface Micromachining Using Sacrificial Polysilicon Anchor and Photolithography after Sacrificial Etching

Fabrication of SiC MEMS Pressure Sensor Based on Novel Vacuum-Sealed Method

The Technology of Using Porous Silicon As a Sacrificial Layer in MEMS

A Supercritical Removal Method: The Rapid Elimination Of Impurities In Polymethyl-Methacrylate At Near Room Temperature And A Mechanism Investigation Of Insulating Property Improvements

Phase-changing sacrificial materials for solvent bonding of high-performance polymeric capillary electrophoresis microchips

Fabrication of Switches on Polymer-Based by Hot Embossing

Crosslinked PMMA as a Low-Dimensional Dielectric Sacrificial Layer for MEMS/NEMS and Quantum Nanostructures Fabrication

A strategy of wafer-level-plastic-packaging for MEMS based on adhesive bonding

Bonding Process for Micro-LEDs on Polyimide Sacrificial Layer Supporting Laser-Induced Mass Transfer

A new process for releasing micromechanical structures in surface micromachining with polysilicon support and LPCVD Si3N4 embedded mask

Removable Fast Package Technology For Mems Devices Using Polymer Connectors And Silicon Sockets