Abstract:In the present work, ethylene-propylene block copolymer (EP90) and ethylene-propylene random copolymer (EPR) were separated from a PP/EPR in-reactor alloy. The EP90 and EPR were then blended with neat isotactic polypropylene (PP) at various proportions to obtain ternary blends. The isothermal crystallization kinetics and morphology of the ternary blends were studied and were compared with those of PP/EP90 binary blend. It is observed that the Avrami exponent increases with crystallization temperature for all the blends, but the PP/EP90/EPR ternary blends compared to the PP/EP90 binary blend exhibit larger Avrami exponents. The crystallization rate decreases as the crystallization temperature increases, as it is indicated by the increase of crystallization half-time. At the same crystallization temperature, the PP/EP90 binary blend exhibits the slowest crystallization rate. The data of crystallization kinetics were also analyzed with Hoffman-Lauritzen crystallization regime theory. It is found that all the blends crystallize in regime III. The increase in the content of EPR in the ternary blends is followed by increases in secondary nucleation constant, the free energy of the chain folding surface, and the chain folding work. The blends were etched with xylene at room temperature and at 80°C to remove EPR and EP90, respectively, and their morphology was studied with scanning electronic microscopy (SEM). The SEM results reveal that the block component EP90 is partially miscible with both PP and EPR, leading to increase in both domain number and domain size. Since both EPR and EP90 retard crystallization of PP in the PP/EPR and PP/EP90 binary blends, we speculate that the miscibility of EPR and EP90 can weaken the interference of EP90 on crystallization of neat PP.

Effects of Switching Frequency of a Periodic Switching Polymerization Process on the Microstructures of Ethylene–Propylene Copolymers in Polypropylene/Poly(ethylene-co-propylene) In-Reactor Alloys

Synthesis of Polypropylene/poly(ethylene-co-propylene) In-Reactor Alloys by Periodic Switching Polymerization Process: Dynamic Change of Gas-Phase Monomer Composition and Its Influences on Polymer Structure and Properties

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Synthesis of Polyethylene/poly(ethylene-Co-propylene) In-Reactor Alloys by Periodic Switching Polymerization Process: Effects of Switching Frequency on Polymer Structure and Properties

I-Pp/epr REACTOR ALLOY PREPARED THROUGH ETHYLENE/PROPYLENE SLURRY COPOLYMERIZATION CATALYZED BY METALLOCENE SUPPORTED Ipp PARTICLES

Polypropylene and Ethylene−Propylene Copolymer Reactor Alloys Prepared by Metallocene/Ziegler−Natta Hybrid Catalyst

Synthesis of Polypropylene/Poly(Ethylene-Co-Propylene) In-Reactor Alloys by Periodic Switching Polymerization Process-Effects of Gas Phase Polymerization Time on Polymer Properties

Structural Parameters in Relation to the Rheological Behavior and Properties of PP/EPR In‐reactor Alloy Synthesized by Multi‐stage Sequential Polymerization

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Influence of Copolymerization Conditions on the Structure and Properties of Polyethylene/Polypropylene/Poly(Ethylene-Co-Propylene) In-Reactor Alloys Synthesized in Gas-Phase with Spherical Ziegler-Natta Catalyst

Characterization of Microstructure of Polypropylene Alloys

Dynamic Shear Rheological Behavior of PP/EPR In‐reactor Alloys Synthesized by Multi‐stage Sequential Polymerization Process

Effect of the Structure on the Morphology and Spherulitic Growth Kinetics of Polyolefin In‐reactor Alloys

Influence of Polymerization Conditions on the Structure and Properties of Polyethylene/polypropylene In‐reactor Alloy Synthesized in the Gas Phase with a Spherical Ziegler–Natta Catalyst

Regulation of Phase Separation in PP/EPR In-Reactor Alloy and Its Effect on Crystallization Kinetics

Effect of Microstructure of Epr on Crystallization and Morphology of Pp/Epr Blends

Microstructure analysis of polypropylene reactor alloy

Influence Of Cocatalyst On The Structure And Properties Of Polypropylene/Poly (Ethylene-Co-Propylene) In-Reactor Alloys Prepared By Mgcl2/Ticl4/Diester Type Ziegler-Natta Catalyst

Regulating the Structure of Ethylene-Propylene Copolymer for Polyolefin In-Reactor Alloy with Improved Properties

Study of Polypropylene Reactor Alloying

Crystallization kinetics and morphology of iso-PP/ethylene-propylene-b- copolymer/ ethylene-propylene-r-copolymer ternary blends