Abstract:In this work, a series of isotactic polypropylene/ethylene-propylene rubber (iPP/EPR) in-reactor alloys were prepared by high efficiency industrial Ziegler-Natta catalyst with diphenyldimethoxysilane/dicyclopentyldimethoxysilane (DDS/D-donor) mixtures as external electron donors. The effects of the external electron donor on the structure and mechanical properties of the iPP/EPR in reactor alloys were studied. According to the characterization results, the iPP/EPR in reactor alloys were mainly composed of random poly(ethylene-co-propylene), multiblock poly(ethylene-co-propylene), and highly isotactic PP. For DDS/D-donor mixtures as external electron donors and triethylaluminum (TEA) as the cocatalyst, as the amount of D-donor in DDS/D-donor mixtures increased, the molecular weight of polypropylene homopolymer and the structural uniformity of multiblock poly(ethylene-co-propylene) increased, whereas when D-donor alone was used as the external electron donor, they decreased. However, the isotacticity of polypropylene homopolymer increased as the amount of D-donor in the DDS/D-donor mixtures increased. Therefore, as the amount of D-donor in the DDS/D-donor mixtures increased, the impact strength of the iPP/EPR in reactor alloy increased, but when D-donor alone was used as the external electron donor, the impact strength of the alloy decreased. An optimum feed ratio between DDS and D-donor was found, namely, DDS/D-donor = 1:3 (Si/Ti = 5). The iPP/EPR in-reactor alloy prepared under these conditions was the toughest. The influence of the external electron donor on the flexural modulus and flexural strength could be ignored.

Influence of Copolymerization Conditions on the Structure and Properties of Polyethylene/Polypropylene/Poly(Ethylene-Co-Propylene) In-Reactor Alloys Synthesized in Gas-Phase with Spherical Ziegler-Natta Catalyst

Influence of Polymerization Conditions on the Structure and Properties of Polyethylene/polypropylene In‐reactor Alloy Synthesized in the Gas Phase with a Spherical Ziegler–Natta Catalyst

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Polypropylene and Ethylene−Propylene Copolymer Reactor Alloys Prepared by Metallocene/Ziegler−Natta Hybrid Catalyst

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Synthesis of high performance PE/PP/EPR in-reactor alloys by sequential multi-stage gas-phase polymerization with spherical Ziegler-natta catalyst

Structure and Morphology of Polyethylene/polypropylene In‐reactor Alloys Synthesized by Spherical High‐yield Ziegler–Natta Catalyst

I-Pp/epr REACTOR ALLOY PREPARED THROUGH ETHYLENE/PROPYLENE SLURRY COPOLYMERIZATION CATALYZED BY METALLOCENE SUPPORTED Ipp PARTICLES

Regulating the Structure of Ethylene-Propylene Copolymer for Polyolefin In-Reactor Alloy with Improved Properties

Influence Of Cocatalyst On The Structure And Properties Of Polypropylene/Poly (Ethylene-Co-Propylene) In-Reactor Alloys Prepared By Mgcl2/Ticl4/Diester Type Ziegler-Natta Catalyst

Synthesis of High Quality PE/PP In-Reactor Alloys with PE Matrix by Multi-Stage Polymerization

Chain structure and mechanical properties of polyethylene/polypropylene/poly(ethylene-co-propylene)in-reactor alloys synthesized with a spherical Ziegler-Natta catalyst by gas-phase polymerization

Influences of Copolymerization Conditions on the Structure and Properties of Isotactic Polypropylene/ethylene–propylene Random Copolymer in Situ Blends

Effect of the Structure on the Morphology and Spherulitic Growth Kinetics of Polyolefin In‐reactor Alloys

Study of Polypropylene Reactor Alloying

Chain structure of polyethylene/polypropylene in-reactor alloy synthesized in gas phase with spherical Ziegler–Natta catalyst

Synthesis of high toughness and stiffness polyolefin in-reactor alloys by reactor granule technology

Synthesis of Polypropylene/poly(ethylene-co-propylene) In-Reactor Alloys by Periodic Switching Polymerization Process: Dynamic Change of Gas-Phase Monomer Composition and Its Influences on Polymer Structure and Properties

High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler–Natta catalyst with various cocatalysts

Effect of the combined external electron donors on the structure and properties of polypropylene/poly(ethylene- co -propylene) in-reactor alloys prepared by high-efficiency industrial Ziegler-Natta catalyst