Abstract:In the present work, ethylene-propylene block copolymer (EP90) and ethylene-propylene random copolymer (EPR) were separated from a PP/EPR in-reactor alloy. The EP90 and EPR were then blended with neat isotactic polypropylene (PP) at various proportions to obtain ternary blends. The isothermal crystallization kinetics and morphology of the ternary blends were studied and were compared with those of PP/EP90 binary blend. It is observed that the Avrami exponent increases with crystallization temperature for all the blends, but the PP/EP90/EPR ternary blends compared to the PP/EP90 binary blend exhibit larger Avrami exponents. The crystallization rate decreases as the crystallization temperature increases, as it is indicated by the increase of crystallization half-time. At the same crystallization temperature, the PP/EP90 binary blend exhibits the slowest crystallization rate. The data of crystallization kinetics were also analyzed with Hoffman-Lauritzen crystallization regime theory. It is found that all the blends crystallize in regime III. The increase in the content of EPR in the ternary blends is followed by increases in secondary nucleation constant, the free energy of the chain folding surface, and the chain folding work. The blends were etched with xylene at room temperature and at 80°C to remove EPR and EP90, respectively, and their morphology was studied with scanning electronic microscopy (SEM). The SEM results reveal that the block component EP90 is partially miscible with both PP and EPR, leading to increase in both domain number and domain size. Since both EPR and EP90 retard crystallization of PP in the PP/EPR and PP/EP90 binary blends, we speculate that the miscibility of EPR and EP90 can weaken the interference of EP90 on crystallization of neat PP.

Regulation of Phase Separation in PP/EPR In-Reactor Alloy and Its Effect on Crystallization Kinetics

Effect of phase separation on spherulitic growth rate of PP/EPR in-reactor alloys

Effect of phase separation on overall isothermal crystallization kinetics of PP/EPR in-reactor alloys

I-Pp/epr REACTOR ALLOY PREPARED THROUGH ETHYLENE/PROPYLENE SLURRY COPOLYMERIZATION CATALYZED BY METALLOCENE SUPPORTED Ipp PARTICLES

Polypropylene and Ethylene−Propylene Copolymer Reactor Alloys Prepared by Metallocene/Ziegler−Natta Hybrid Catalyst

Study on Liquid-Liquid Phase-Separation and Its Effect on the Crystallization Kinetics of Blends Composed of Isotactic Polypropylene/Ethylene-Propylene Rubber

Morphology of Polypropylene/Poly(Ethylene-Co-Propylene) In-Reactor Alloys Prepared by Multi-Stage Sequential Polymerization and Two-Stage Polymerization

The effect of phase separation on crystallization of polyethylene/poly(ethylene-alt-propylene) blend

Crystallization kinetics and morphology of iso-PP/ethylene-propylene-b- copolymer/ ethylene-propylene-r-copolymer ternary blends

Polymerization-induced phase separation in polyethersulfone modified epoxy resin systems: effect of curing reaction mechanism

Effect of Microstructure of Epr on Crystallization and Morphology of Pp/Epr Blends

Effects of Switching Frequency of a Periodic Switching Polymerization Process on the Microstructures of Ethylene–Propylene Copolymers in Polypropylene/Poly(ethylene-co-propylene) In-Reactor Alloys

Synthesis of Polypropylene/poly(ethylene-co-propylene) In-Reactor Alloys by Periodic Switching Polymerization Process: Dynamic Change of Gas-Phase Monomer Composition and Its Influences on Polymer Structure and Properties

Crystallization‐correlated phase separation of polypropylene random copolymers

Composition Distributions of Different Particles of A Polypropylene/Poly(Ethylene-Co-Propylene) in Situ Alloy Analyzed by Temperature-Rising Elution Fractionation

Crystallization Behavior of the Blends of Isotactic Polypropylene and Ethylene-Propylene Blocky Copolymers

Effect of the Structure on the Morphology and Spherulitic Growth Kinetics of Polyolefin In‐reactor Alloys

Synthesis of Polyethylene/poly(ethylene-Co-propylene) In-Reactor Alloys by Periodic Switching Polymerization Process: Effects of Switching Frequency on Polymer Structure and Properties

Effects of Composition on Microstructure and Crystallization Behavior for Impact Polypropylene Copolymer Investigated by Restructuring the Complex Core-Shell Dispersed Particles in Ternary Blends

Structural Parameters in Relation to the Rheological Behavior and Properties of PP/EPR In‐reactor Alloy Synthesized by Multi‐stage Sequential Polymerization

STUDY ON CRYSTALLIZATION BEHAVIOR OF ISOTACTIC POLYPROPYLENE PRODUCED BY SUPERCRITICAL POLYMERIZATION