Abstract:C/C-SiC-ZrB2 composites with sharp leading edge shape were prepared by reactive melt infiltration, and their ablation behavior was investigated by subjected to the oxyacetylene flame with a heat flux of 2.38 MW/m(2) for 60 s. The results show that after adding ZrB2 particles the mass and linear ablation rates of the C/C-SiC composites could be reduced by 36% and 52%, respectively. The ablated regions of the composites can be divided into two regions according the ablated features: brim ablation region and center ablation region. In the brim ablation region, a kind of 'embedding structure' of Zr-O-Si glass layer was formed on the surface of the C/C-SiC-ZrB2 composites, and the ablated surface of the C/C-SiC composites was covered by a melting SiO2 layer. In the center ablation region, the molten SiO2 layer cannot resist the intensive impact of high-temperature, speed and pressure oxyacetylene flame, resulting in the failure of the protective coating for C/C-SiC composites. The surface of C/C-SiC-ZrB2 composites was covered by a sintered ZrO2 layer, which acted as an effective oxygen species and heat flux barrier and protected the composites against further ablation, resulting in an excellent configurational stability of C/C-SiC-ZrB2 composites. (C) 2017 Elsevier B.V. All rights reserved.

Ablation Behavior of Y2SiO5/SiC Coating for C/C Composites under Oxyacetylene Torch

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Effect of SiC coating on ablation resistance of C/C composites under oxyacetylene torch flame

Ablation Performance of C/C-ZrC-SiC Composites with In-Situ YSi2-doped ZrC-SiC-ZrSi2 Coating under Oxyacetylene Torch

Ablation performance of C/C-ZrC-SiC composites with in-situ YSi 2 -doped ZrC-SiC-ZrSi 2 coating under oxyacetylene torch

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Ablation behaviour of the CVD-(ZrC/SiC)3 alternate coating on C/C composites under oxyacetylene torch with different heat fluxes

New Anti-Ablation Candidate for Carbon/carbon Composites: Preparation, Composition and Ablation Behavior of Y2Hf2O7 Coating under an Oxyacetylene Torch

Ablation Behavior of ZrC and ZrO2 Coatings on SiC Coated C/C Composites under Oxyacetylene Torch with Different Heat Fluxes

Ablation Resistance of SiC‐modified ZrC Coating Prepared by SAPS for SiC‐coated Carbon/carbon Composites

Ablation Behavior of Single and Alternate Multilayered ZrC-SiC Coatings under Oxyacetylene Torch

Ablation Behavior of Zrc-La2o3 Coating for Sic-Coated Carbon/Carbon Composites under an Oxyacetylene Torch

Microstructure and Ablation Mechanism of SiC-ZrC-Al2O3 Coating for SiC Coated C/C Composites under Oxyacetylene Torch Test

A Multilayer SiC/ZrB2/SiC Ablation Resistance Coating for Carbon/Carbon Composites

Ablation Behavior of Sharp-Shape C/C-SiC-ZrB2 Composites under Oxyacetylene Flame

Ablation Resistance of Different Coating Structures for C/ZrB2–SiC Composites under Oxyacetylene Torch Flame

The Effects of Carbon/carbon Composites Blasting Treatment and Modifying SiC Coatings with SiC/ZrB2 on Their Oxidation and Cyclic Ablation Performances

Effects of SiC Addition on the Ablation Properties of C/C Composites in Different Heat Fluxes under Oxyacetylene Torch

Ablation Behavior and Mechanism of C/C–ZrC–SiC Composites under an Oxyacetylene Torch at 3000°C

Ablation Resistance of SiC–ZrC Coating Prepared by a Simple Two-Step Method on Carbon Fiber Reinforced Composites

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration