Abstract:Micro-structured optical film is one of the micro-optical elements and has a great market demand. This article studies the microstructured optical film formed by UV imprinting: The influence of embossing pressure on microstructure replication accuracy was explored. The larger the pressure, the better the material filling. When the pressure is 5N, the microstructure replication is complete; The relationship between the radiation intensity and warpage deformation was explored, and the decrease in the intensity of the UV light source can effectively reduce the warpage deformation; The influence of the material formula on the optical properties of the product was explored. When the oligomer content was 55%, the film had a high light transmittance. At the same time, the prepared film was subjected to an apparent inspection with good microstructure replication accuracy.Microstructured optical elements are widely used in optical fields such as semiconductors, lasers, beam shaping [1-2] and solar energy [3-5] due to their unique advantages such as small size and high performance. As a key component in many industries, it has a high market demand rate. However, the microstructure forming process is complicated, the manufacturing cost is high, and the accuracy is difficult to guarantee, which has restricted its development. With the advancement of science and technology and the increase in market demand, more and more researchers and enterprises have put their eyes on the research of preparing micro-structured optical elements.At present, the commonly used microstructures are mainly icrolens array [6-8], and the processing methods include micro-imprinting [9-10], etching [11], electron beam direct writing, and micro-injection [12], etc. This article studies the UV-curing embossing process in micro-embossing. This processing method has the advantages of fast molding, high efficiency, and environmental protection. And this process is conducive to mass production and has a broad market application prospect.In this paper, the forming process and material formulation of microstructured optical film prepared by light-cured micro-imprinting were investigated, and the microstructure morphology of the preparation was analyzed apparently.

Preparation Of Wafer-Level Led Packaging Used Uniform Micro Glass Cavities By An Improved Chemical Foaming Process (Cfp)

Micro Aspheric Glass Lens Molding Process

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Silicon based wafer-level packaging for flip-chip LEDs

Study on Preparation of Microstructured Optical Membrane

A Review of Moldflow and Finite Element Analysis Simulation of Chip Scale Packaging (CSP) for Light Emitting Diode (LED)

A Pre-Shaped Wafer Level Packing Strategy for Rf Mems

Optical Properties of Direct Wafer Bonded Micro-Cavity Structures

Design and Fabrication of High Performance Wafer-Level Vacuum Packaging Based on Glass–silicon–glass Bonding Techniques

Fabrication and Analysis of a Fabry-Perot Cavity with a Micromechanical Wet-Etching Process.

Wafer-Level Packaging Method For Rf Mems Applications Using Pre-Patterned Bcb Polymer

Polymer Dispensing and Embossing Technology for the Lens Type LED Packaging

Design of Optical Structure for Chip-on-board Wafer Level Packaging LEDs

Advancing LED technology: the FDCSP element's breakthrough in mini and micro-LED packaging and backlight module enhancement

A Novel Process Obtaining Silicone Dome Lens for Wafer Level LED Packaging

Precise Modulation of the Debonding Behaviours of Ultra-Thin Wafers by Laser-Induced Hot Stamping Effect and Thermoelastic Stress Wave for Advanced Packaging of Chips

Partially Filled TGV Based on Double Sides Cu Conformal Electroplating Process for MEMS Vacuum Packaging

Flexible fabrication of optical glass micro-lens array by using contactless hot embossing process

Development of two different molding methods in 2.5D package with 20 μm or less fine bump pitch CoW structure

Wafer-Level Vacuum Packaging for an Optical Readout Bi-Material Cantilever Infrared Fpa

‘Flip Glass Substrate’ Package Technology for LED Yield and Performance Enhancement