Abstract:This study presents a structure design and process method for lens type LED package. Dome type or side-emitting-enhancement silicone lens without molding process are achieved. The ceramic ring is adopted as the confine for the encapsulant. The surface intension along the sidewall of ceramic ring and silicone surface, the cohesion force and the gravity of silicone determine the shape of dome type silicone lens. The cone shape tooling coated with a releasing material is immersed into the dome type silicone lens before the silicone fully hardening. After curing simultaneously, to remove the tooling from package, the package with side-emitting-enhancement silicone lens is finished. With the mentioned architecture and process, this LED package herein has three merits, (1) to improve light extraction efficiency: reduce the chance of total internal reflection by the geometry of dome type silicone lens. (2)To enhance the flexibility of LED package design, the die placement location would be constrained by the mold in the traditional package process. (3) Mold-less side-emitting-enhancement silicone lens. Furthermore, two types of cone shape tooling are implemented and compared for side-emitting-enhancement silicone lens. Measurement results show the ratio between the lens high and lens radius could achieve 0.9:1. The view angles of dome type and side-emitting-enhancement LED packaged devices can reach 153° and 180 °, respectively. As using the same brightness grade of LED chip, the luminous flux is increasing 15% as compared the dome type package with the commercial PLCC (Plastic Leaded Chip Carrier) type package. The luminous flux of side-emitting-enhancement LED package decreases 8% as compared with the dome type one.

Design of Optical Structure for Chip-on-board Wafer Level Packaging LEDs

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

A sandwich structure of multi-chip COB LED with double flat glass boards coated with phosphors film by screen printing technique

Analysis of thermal spreading resistance in high power LED package and its design optimization

Accurate Optical Optimization of Light-Emitting Diodes with Consideration of Coupling Between Purcell Factor and Transmittance Coefficient

Luminescence mechanism analysis on high power tunable color temperature Chip-on-Board white LED modules

Combined Experimental and Monte-Carlo Ray-Tracing Approach for Optimizing Light Extraction in LED COB Modules

Silicon based wafer-level packaging for flip-chip LEDs

Beam Shaping for Multicolour Light-Emitting Diodes with Diffractive Optical Elements

Enhancing Luminous Efficiency of Quantum Dot-Based Chip-on-Board Light-Emitting Diodes Using Polystyrene Fiber Mats

Optical design of a road lighting luminaire using a chip-on-board LED array

Led Package with Dome/Side-Emitting-Enhancement Silicone Lens Achieved by Dispensing and Geometry Transferring

Optimization of Heat Sink Design Based on Chimney Effect for Integrated Packaging Semiconductor Lighting Source

Micro-rolling Forming of Light Extraction Structure on Substrate for LED Chip-on-Board Package

Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices

Optimization design of irradiance array for LED uniform rectangular illumination.

Optical Simulation Design of Novel Spherical LED Device with Wide Beam Angle and High Uniformity

Optical Simulation Design of Surface Mounted Device Beads for Wide Beam and High Uniformity Display

Polymer Dispensing and Embossing Technology for the Lens Type LED Packaging

P‐8.4: Research on Chip Layout Design and Printing Process Optimization of Mini‐LED Light Board

Highly Enhanced Luminescence Performance of LEDs Via Controllable Layer‐Structured 3D Photonic Crystals and Photonic Crystal Beads