Abstract:We demonstrate that a pair of wedge prisms with opposite angular dispersion can be designed to have zero spherical aberration, zero coma, and zero astigmatism and be simultaneously achromatic in convergent rays, and the system can easily reach the diffraction limit and be utilized in precise three-dimensional imaging, special optical testing, etc., for widening the imaging range. Aberration equations of a pair of thin wedge prisms in paraxial optics are first derived, from which a special solution is obtained by making a few presuppositions. Then three initial structures are built to verify our inference. The near-zero Zernike standard coefficients and tiny rms radii of the image spots given by OpticStudio prove that the derived equations hold. After that the refractive indices of two prisms are both tested, where the testing results show that prisms with high-refractive indices are more capable of compensating monochromatic aberrations. With the aid of Monte-Carlo analysis method, tolerance analysis is carried on with the worst cases of the three optimized systems. The results show that a pair of wedge prisms with the opposite angular dispersion can effectively work within the diffraction limit even if the optical manufacturing and assembly errors are large. In the end, the system design limitations are given, and we suggest that the working F-number of the eyepiece should preferably be larger than 8.0. (C) 2021 Society of Photo-Optical Instrumentation Engineers (SPIE)

Lens-Prism Correctors For Ritchey-Chretien And Quasi Ritchey-Chretien Foci

Some New Lens-Prism Correctors for Prime Focus

Design of objective lens with reflective spherical Fresnel zone plate

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

Research of precision interference locating method for a partial null compensator at aspheric testing

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Doublet liquid variable-focus lens for spherical aberration correction

Wide-field Corrector for a Gregory Telescope

Optical System Design of Telescope Based on Mixed Modulation Diffractive Lens

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Design of Four-fiber Collimator Based on a Variable-curvature Lens

Spherochromatism correction of hybrid refractive-diffractive singlet

VIS-NIR Superachromatic Triplet Design with Five-Color Correction for a Broadband Interferometer

A Flat-field Reflecting Focal Reducer

Correction of the error induced by obscurations of Ritchey-Chretien collimators for high-resolution space camera MTF measured with the ISO 12233 slanted-edge method

The Primary Structure Design of A Birefringent Lens with the Concept of Pseudo-Chromatic Aberration

Design of the Primary Structure of the Birefringent Lens with the Concept of Pseudo-Chromatic Aberration and the PW Method

Distortion correction for imaging on non-planar surface using freeform lens

Design And Analysis Of A Pair Of Prisms For Widening The Imaging Range Of An Optical System

Automatic Design of Corrector Systems for Cassegrain Telescopes

A corrector design using active vase mirrors that allows a fixed telescope to access a large region of the sky