Abstract:In the development of space-based large telescope systems, having the capability to perform active optics correction allows correcting wavefront aberrations caused by thermal perturbations so as to achieve diffraction-limited performance with relaxed stability requirements. We present a method of active optics correction used for current ground-based telescopes and simulate its effectiveness for a large honeycomb primary mirror in space. We use a finite-element model of the telescope to predict misalignments of the optics and primary mirror surface errors due to thermal gradients. These predicted surface error data are plugged into a Zemax ray trace analysis to produce wavefront error maps at the image plane. For our analysis, we assume that tilt, focus and coma in the wavefront error are corrected by adjusting the pointing of the telescope and moving the secondary mirror. Remaining mid- to high-order errors are corrected through physically bending the primary mirror with actuators. The influences of individual actuators are combined to form bending modes that increase in stiffness from low-order to high-order correction. The number of modes used is a variable that determines the accuracy of correction and magnitude of forces. We explore the degree of correction that can be made within limits on actuator force capacity and stress in the mirror. While remaining within these physical limits, we are able to demonstrate sub-25 nm RMS surface error over 30 hours of simulated data. The results from this simulation will be part of an end-to-end simulation of telescope optical performance that includes dynamic perturbations, wavefront sensing, and active control of alignment and mirror shape with realistic actuator performance.

A corrector design using active vase mirrors that allows a fixed telescope to access a large region of the sky

Automatic Design of Corrector Systems for Cassegrain Telescopes

Mirror actively deformed and regulated for applications in space: design and performance

Wide-field Corrector for a Gregory Telescope

Analysis of active optics correction for a large honeycomb mirror

Active optics in astronomy - Freeform mirror for the MESSIER telescope proposal

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Freeform surface compensation design for machining error of primary mirror

The Experimental Study of Active Surface System for the Large-Aperture, High-Accuracy Radio Telescope

Modified Wavefront Sensing and Correction Methodology for Active Segment Mirror of Large Space Telescope

Misalignment Correction Method of Space Optical System on Orbit

Active Optics and Aberration Correction Technology for Sparse Aperture Segmented Mirrors

Approaches to developing tolerance and error budget for active three mirror anastigmat space telescopes

Location-grouping Algorithm Based on Limited Actuators Deformable Mirror for High Precision Wavefront Aberration Correction in Adaptive Optics System

Large Range of a High-Precision, Independent, Sub-Mirror Three-Dimensional Co-Phase Error Sensing and Correction Method via a Mask and Population Algorithm

Design and Analysis of the Optical Structure for K Mirror in Astronomical Telescopes

Active optics: deformable mirrors with a minimum number of actuators

Optimized Optical System with a 1.65 M Wide-Field Corrector for the 6.5 M High-Performance MUltiplexed Survey Telescope

The Active Mirror Control of the MAGIC Telescope

Optical System Design of Telescope Based on Mixed Modulation Diffractive Lens

<title>Configurations for an extremely large telescope with a spherical or aspherical primary mirror</title>