Analysis of active optics correction for a large honeycomb mirror

Solvay Blomquist,Hubert Martin,Hyukmo Kang,Rebecca Whitsitt,Kevin Derby,Heejoo Choi,Ewan S. Douglas,Daewook Kim

2023-09-09

Abstract:In the development of space-based large telescope systems, having the capability to perform active optics correction allows correcting wavefront aberrations caused by thermal perturbations so as to achieve diffraction-limited performance with relaxed stability requirements. We present a method of active optics correction used for current ground-based telescopes and simulate its effectiveness for a large honeycomb primary mirror in space. We use a finite-element model of the telescope to predict misalignments of the optics and primary mirror surface errors due to thermal gradients. These predicted surface error data are plugged into a Zemax ray trace analysis to produce wavefront error maps at the image plane. For our analysis, we assume that tilt, focus and coma in the wavefront error are corrected by adjusting the pointing of the telescope and moving the secondary mirror. Remaining mid- to high-order errors are corrected through physically bending the primary mirror with actuators. The influences of individual actuators are combined to form bending modes that increase in stiffness from low-order to high-order correction. The number of modes used is a variable that determines the accuracy of correction and magnitude of forces. We explore the degree of correction that can be made within limits on actuator force capacity and stress in the mirror. While remaining within these physical limits, we are able to demonstrate sub-25 nm RMS surface error over 30 hours of simulated data. The results from this simulation will be part of an end-to-end simulation of telescope optical performance that includes dynamic perturbations, wavefront sensing, and active control of alignment and mirror shape with realistic actuator performance.

Instrumentation and Methods for Astrophysics

What problem does this paper attempt to address?

### What problems does this paper attempt to solve?

This paper aims to solve the problem of wave - front aberration caused by temperature gradients in large - aperture honeycomb mirrors in space in a dynamic environment, so as to achieve diffraction - limited performance. Specifically, the research team uses an active optical correction method to control and correct the shape changes of the large honeycomb primary mirror to deal with the wave - front errors caused by thermal perturbations.

#### Main problems:
1. **Wave - front aberration correction**: In a space telescope system, thermal perturbations can cause wave - front aberration and affect the imaging quality. The paper proposes an active optical correction method to correct these aberrations.
2. **Diffraction - limited performance**: In order to achieve diffraction - limited performance, precise shape control of the primary mirror is required to relax the stability requirements of the optical system.
3. **Influence of thermal gradients**: The research simulates the influence of temperature gradients on the surface of the primary mirror and uses a finite - element model to predict the misalignment of optical elements and the surface error of the primary mirror.
4. **Multi - mode correction**: The medium - and high - order errors are corrected by physically bending the primary mirror, and the bending modes from low - order to high - order are formed by combining the actions of multiple actuators to optimize the correction effect.

#### Specific objectives:
- **Simulation and verification**: Simulate and verify the effectiveness of the active optical correction method through a finite - element model and Zemax ray - tracing analysis.
- **Force and stress limits**: Explore the degree of correction that can be achieved within the actuator force capacity and glass stress limits.
- **Optimal number of modes**: Determine the optimal number of bending modes to meet the requirements of wave - front error without significantly increasing the actuator force range.

#### Research significance:
This research provides an important reference for the design of future space telescopes, especially in dealing with the influence of thermal environment changes on the optical system. Through active optical technology, the strict requirements for the stability of the optical system can be reduced to a certain extent, thereby improving the imaging quality and reliability of space telescopes.

### Summary
The paper verifies the application of the active optical correction method in large - aperture honeycomb mirrors in space through simulation and experiments, and shows its ability to maintain high - precision imaging in a thermal - gradient environment. This provides important technical support for the design and development of future large - space telescopes.