Integrated modeling of wavefront sensing and control for space telescopes utilizing active and adaptive optics

Kevin Z. Derby,Kian Milani,Solvay Blomquist,Kyle Van Gorkom,Sebastiaan Haffert,Hyukmo Kang,Hill Tailor,Heejoo Choi,Christopher B. Mendillo,Jared R. Males,Daewook Kim,Ewan S. Douglas
2023-09-12
Abstract:Extreme wavefront correction is required for coronagraphs on future space telescopes to reach 1e-8 or better starlight suppression for the direct imaging and characterization of exoplanets in reflected light. Thus, a suite of wavefront sensors working in tandem with active and adaptive optics are used to achieve stable, nanometer-level wavefront control over long observations. In order to verify wavefront control systems comprehensive and accurate integrated models are needed. These should account for any sources of on-orbit error that may degrade performance past the limit imposed by photon noise. An integrated model of wavefront sensing and control for a space-based coronagraph was created using geometrical raytracing and physical optics propagation methods. Our model concept consists of an active telescope front end in addition to a charge-6 vector vortex coronagraph instrument. The telescope uses phase retrieval to guide primary mirror bending modes and secondary mirror position to control the wavefront error within tens of nanometers. The telescope model is dependent on raytracing to simulate these active optics corrections for compensating the wavefront errors caused by misalignments and thermal gradients in optical components. Entering the coronagraph, a self-coherent camera is used for focal plane wavefront sensing and digging the dark hole. We utilize physical optics propagation to model the coronagraph's sensitivity to mid and high-order wavefront errors caused by optical surface errors and pointing jitter. We use our integrated models to quantify expected starlight suppression versus wavefront sensor signal-to-noise ratio.
Instrumentation and Methods for Astrophysics,Optics
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to achieve extreme wave - front correction in space telescopes through integrated modeling and control techniques, in order to reach a starlight suppression level of 10^-8 or better, thereby enabling the direct imaging and characterization of exoplanets. Specifically, the paper focuses on the following aspects: 1. **The need for extreme wave - front correction**: In order to directly image and characterize exoplanets in reflected light, future space telescopes require extremely high wave - front control precision (nanometer - level) to achieve 10^-8 or better starlight suppression. 2. **The necessity of comprehensive modeling**: In order to verify the wave - front control system, it is necessary to establish comprehensive and accurate integrated models. These models should consider all possible on - orbit error sources that may lead to performance degradation, including thermal gradients of optical elements, alignment errors, etc. 3. **Optimization of the wave - front sensing and control system**: The paper proposes a model that integrates geometric ray - tracing and physical - optical - propagation methods for simulating and optimizing the wave - front sensing and control system, ensuring picometer - level wave - front stability during long - term observations. ### Main research content The paper describes in detail how to construct and use this integrated model to simulate the wave - front sensing and control system of space telescopes. Specifically, it includes: - **Geometric ray - tracing**: Used to simulate low - order wave - front errors, such as field - dependent aberrations and alignment errors of optical elements. - **Physical - optical - propagation**: Used to simulate high - order wave - front errors, such as optical - surface errors, pointing jitter, etc. - **Active and adaptive optical systems**: Correct wave - front errors through deformable mirrors (DM) and other active optical elements to ensure that wave - front errors are within the nanometer level. - **Self - coherent camera (SCC)**: Used for focal - plane wave - front sensing, to explore and maintain "dark holes" in order to reduce residual starlight. ### Key technologies and methods - **Phase retrieval**: Phase retrieval is carried out through the context camera (CC) to drive the adjustment of the primary mirror and the secondary mirror. - **Self - coherent camera (SCC)**: Used for focal - plane wave - front sensing, by introducing an offset pinhole to detect wave - front errors at medium - high spatial frequencies. - **Closed - loop control algorithm**: Minimize the residual starlight in the specified area by iteratively optimizing the shape of the DM. ### Simulation results The paper presents the simulation results obtained using the above - mentioned model, indicating that the system can maintain stable wave - front control during long - exposure and achieve starlight suppression at the 10^-9 level, thereby providing theoretical and technical support for future space telescopes. In summary, the main objective of this paper is to achieve extreme wave - front correction in space telescopes through integrated modeling and advanced wave - front sensing and control technologies to meet the requirements for directly imaging exoplanets.