Abstract:For the optical system of the telescope, with the increase in telescope size, the manufacture of monolithic primary becomes increasingly difficult. Instead, the use of segmented mirrors, where many individual mirrors (the segments) work together to provide an image quality and an aperture equivalent to that of a large monolithic mirror, is considered a more appropriate strategy. But with the introduction of the large telescope mirror comprised of many individual segments, the problem of insuring a smooth continuous mirror surface (co-phased mirrors) becomes critical. One of the main problems is the measurement of the vertical displacement between the individual segments (piston error), for such mirrors, the segment vertical misalignment (piston error) between the segments must be reduced to a small fraction of the wavelength (<100nm) of the incoming light. The measurements become especially complicated when the piston error is in order of wavelength fractions. To meet the performance capabilities, a novel method for phasing the segmented mirrors optics system is described. The phasing method is based on a high-aperture Michelson interferometer. The use of an interferometric technique allows the measuring of segment misalignment during the daytime with high accuracy, which is a major design guideline. The innovation introduced in the optical design of the interferometer is the simultaneous use of monochromatic light and multiwavelength combination white-light source in a direct method for improving the central fringe identification in the white-light interferometric phasing system. With theoretic analysis, we find that this multiwavelength combination technique can greatly increase the visibility difference between the central fringe and its adjacent side fringes, and thus it offers an increased signal resolution. So make the central fringe identification become easier, and enhance the measure precision of the segment phasing error. Consequently, it is suitable for high-precision measurement purpose and application in the segment piston error phasing system. The description about the expected interferograms and the feasibility of the phasing method are presented here.

Large Range of a High-Precision, Independent, Sub-Mirror Three-Dimensional Co-Phase Error Sensing and Correction Method via a Mask and Population Algorithm

Analysis on mirrors installation error of high-accuracy long focal length measurement system

Co-phase quantization and adjustment of segmented mirrors based on dual-wavelength vortex interference

Active Optics and Aberration Correction Technology for Sparse Aperture Segmented Mirrors

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Detection Technology for Co-Phasing Segmented Primary Mirrors Based on Broadband Interferometric System

Modified Wavefront Sensing and Correction Methodology for Active Segment Mirror of Large Space Telescope

The Optimized Calculation of Driving Points Distribution in Large Segmented Mirrors

Investigation into the Co-Phase Detection Methodology for Segmented Plane Mirrors Utilizing Grazing Incidence Interferometry

New Interferometric Algorithm for the Measurement of Phasing Errors in Spherical Segmented-Mirrors System

Multi-tip/tilt errors simultaneous detection for segmented telescopes based on coherent diffraction

Application of A High-Precision Interferometric Measuring System As Phasing the Segmented Primary Mirrors of the Next Generation of Ground-Based Telescope

Study on the co-phasing simulation and experimental of segmented mirror based on broadband light

Segmented mirror fine phasing using model-based wavefront sensorless adaptive optics and Chebyshev segmented piston-tip-tilt modes

Co-Phasing Measurement for Segmented Mirrors and Image Retrieval Technology Based on Phase Diversity

Application of A White-Light Interferometric Measuring System As Co-Phasing the Segmented Primary Mirrors of the High-Aperture Telescope

High-accuracy Piston Error Measurement with a Large Capture Range Based on Coherent Diffraction

Piston Error Automatic Correction for Segmented Mirrors via Deep Reinforcement Learning

Measurement of Alignment Parameters in Spherical Segmented-Mirrors Using Novel Algorithm and Advanced Phase Unwrapping Method

MTF Non-Redundant Distribution for Multi-Piston Errors Detection of Segmented Telescopes

Analysis of low-coherence-spectrum interferometric system applied to phase error detection of segmented mirror