Abstract:The performance of telescopes, important components of space interferometry systems, directly affects the accuracy of gravitational wave signals. Space gravitational wave telescopes typically employ an off-axis four-mirror system. When aligned, this system not only has multiple misalignments, but also exhibits interrelated aberrations from various misalignments. These characteristics may lead to difficult alignment of the telescope system as well as significant deviation between the position of the telescope after alignment and the ideal position. To address the aforementioned issues, first, a sensitivity matrix equation was established between the misalignment of optical components and the Fringe Zernike coefficients. Based on the sensitivity matrix equation, a damping least-squares evaluation function was constructed to reduce the significant deviation between the aligned and ideal positions. Second, a typical optical system of a space gravitational wave telescope was designed, and the sensitivity matrix was calculated. The relationship between the wavefront distortions caused by misalignments in each optical component was examined. To simplify telescope installation, a strategy using secondary mirrors as compensatory elements was proposed. Finally, to verify the effectiveness of the scheme, 200 sets of tolerance files were randomly generated. Based on the evaluation function of the damping least-squares method, a reasonable damping factor was set to limit the solution range of the misalignment amount, which enabled calculating the secondary mirror compensation amount. Experimental results indicate that after aligning the 200 random telescope files, the root-mean-square wavefront error was reduced to less than 0.0030λ, and the maximum error between the magnification after alignment and the ideal position magnification was only 0.57%, which confirms the feasibility of this alignment scheme.

Automatic Design of Corrector Systems for Cassegrain Telescopes

Model Design for Adjustment Mechanism of Imaging Lens's Focal Length of Space Solar Telescope

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

A corrector design using active vase mirrors that allows a fixed telescope to access a large region of the sky

Optical Pupil Shift Correction Method for Large Ground-Based Optical Telescopes

Optical System Design of Telescope Based on Mixed Modulation Diffractive Lens

MAIN OPTICAL SYSTEM OF CHINA'S 2.16-M TELESCOPE

Optimized Optical System with a 1.65 M Wide-Field Corrector for the 6.5 M High-Performance MUltiplexed Survey Telescope

Automatic Correction of Aberrations in Astro-Optical Systems

New correction method for transmission-type misalignment optical system based on aberration theory

Correction of the error induced by obscurations of Ritchey-Chretien collimators for high-resolution space camera MTF measured with the ISO 12233 slanted-edge method

Design of Cassegrain Optical System with Wide Field of View Based on Diffractive Optics

Assembly and adjustment method based on aberrations correction for telescope optical system

The Experimental Study of Active Surface System for the Large-Aperture, High-Accuracy Radio Telescope

Design and Numerical Analysis of an Infrared Cassegrain Telescope Based on Reflective Metasurfaces

Aberration Correction Method for the Catadioptric Imaging System Design.

Pupil aberrations correction of the afocal telescope for the TianQin project

Simulation alignment of optical system for space gravitational wave telescope

Misalignment Correction Method of Space Optical System on Orbit

High Precision Automatic Measurement System Design for Instrument Posture Testing During Satellite Assembly

Freeform surface compensation design for machining error of primary mirror