Abstract:In the development of space-based large telescope systems, having the capability to perform active optics correction allows correcting wavefront aberrations caused by thermal perturbations so as to achieve diffraction-limited performance with relaxed stability requirements. We present a method of active optics correction used for current ground-based telescopes and simulate its effectiveness for a large honeycomb primary mirror in space. We use a finite-element model of the telescope to predict misalignments of the optics and primary mirror surface errors due to thermal gradients. These predicted surface error data are plugged into a Zemax ray trace analysis to produce wavefront error maps at the image plane. For our analysis, we assume that tilt, focus and coma in the wavefront error are corrected by adjusting the pointing of the telescope and moving the secondary mirror. Remaining mid- to high-order errors are corrected through physically bending the primary mirror with actuators. The influences of individual actuators are combined to form bending modes that increase in stiffness from low-order to high-order correction. The number of modes used is a variable that determines the accuracy of correction and magnitude of forces. We explore the degree of correction that can be made within limits on actuator force capacity and stress in the mirror. While remaining within these physical limits, we are able to demonstrate sub-25 nm RMS surface error over 30 hours of simulated data. The results from this simulation will be part of an end-to-end simulation of telescope optical performance that includes dynamic perturbations, wavefront sensing, and active control of alignment and mirror shape with realistic actuator performance.

The Active Mirror Control of the MAGIC Telescope

Mirror actively deformed and regulated for applications in space: design and performance

Novel Back-coated Glass Mirrors for the MAGIC Telescopes

Active optics in astronomy - Freeform mirror for the MESSIER telescope proposal

Membrane Space Telescope: Active Surface Control with Radiative Adaptive Optics

The reflecting surface of the MAGIC-II Telescope

Magnetic liquid deformable mirrors for astronomical applications:Active correction of optical aberrations from lower-grade optics and support system

Design and development of a freeform active mirror for an astronomy application

Active Control for Segmented Deployable Ultra-thin Piezoelectric Space Telescope.

Optical calibration and performance of the adaptive secondary mirror at the Magellan telescope

High fidelity adaptive mirror simulations with reduced order models

Automatic Tuning of the Internal Position Control of an Adaptive Secondary Mirror

Controlling cantilevered adaptive X-ray mirrors

Design, manufacture and metrology of additively manufactured, metal and ceramic lightweight circular mirror prototypes

Surface Control of Primary Mirror for Deployable Diffractive Telescope

Analysis of active optics correction for a large honeycomb mirror

Absolute reflectance of a concave mirror used for astro-particle physics experiments

New Scheme to Control X-Ray Deformable Mirrors

Small telescopes being effective: MAGIC or not?

Development of a Miniaturized Deformable Mirror Controller

A Support Structure for A Compliant Deformable Mirror