Abstract:For sufficiently wide ranges of applied control signals (control voltages), MEMS and piezoelectric Deformable Mirrors (DMs), exhibit nonlinear behavior. The nonlinear behavior manifests itself in nonlinear actuator couplings, nonlinear actuator deformation characteristics, and in the case of piezoelectric DMs, hysteresis. Furthermore, in a number of situations, DM behavior can change over time, and this requires a procedure for updating the DM models on the basis of the observed data. If not properly modeled and if not taken into account when designing control algorithms, nonlinearities, and time-varying DM behavior, can significantly degrade the achievable closed-loop performance of Adaptive Optics (AO) systems. Widely used approaches for DM control are based on pre-estimated linear time-invariant DM models in the form of influence matrices. Often, these models are not being updated during system operation. Consequently, when the nonlinear DM behavior is excited by control signals with wide operating ranges, or when the DM behavior changes over time, the state-of-the-art DM control approaches relying upon linear control methods, might not be able to produce a satisfactory closed-loop performance of an AO system. Motivated by these key facts, we present a novel method for data-driven DM control. Our approach combines a simple open-loop control method with a recursive least squares method for dynamically updating the DM model. The DM model is constantly being updated on the basis of the dynamically changing DM operating points. That is, the proposed method updates both the control actions and the DM model during the system operation. We experimentally verify this approach on a Boston Micromachines MEMS DM with 140 actuators. Preliminary experimental results reported in this manuscript demonstrate good potential for using the developed method for DM control.

Automatic Tuning of the Internal Position Control of an Adaptive Secondary Mirror

In-lab and On-sky Closed-loop Results of Adaptive Secondary Mirrors with TNO's Hybrid Variable Reluctance Actuators

Novel Electro-Hydraulic Position Control System for Primary Mirror Supporting System

First laboratory and on-sky results of an adaptive secondary mirror with TNO-style actuators on the NASA Infrared Telescope Facility

Tuning the MAPS Adaptive Secondary Mirror: Actuator Control, PID Tuning, Power Spectra and Failure Diagnosis

A novel method for adaptive control of deformable mirrors

Optical calibration of large format adaptive mirrors

The Actuator Design and the Experimental Tests of a New Technology Large Deformable Mirror for Visible Wavelengths Adaptive Optics

An adaptive optics upgrade for the Automated Planet Finder Telescope using an adaptive secondary mirror

Mode-Voltage Constrained Control for Adaptive Optics System

Membrane Space Telescope: Active Surface Control with Radiative Adaptive Optics

Development of a Miniaturized Deformable Mirror Controller

Research on Active Control for Thermal Deformation of Precise Membrane Reflector With Boundary SMA Actuators

Experiments on Quasi-Static and Dynamic Control of a PVDF Laminated Membrane-Like Mirror

Servo-fluid-elastic modeling of contactless levitated adaptive secondary mirrors

The Active Mirror Control of the MAGIC Telescope

Lateral constraint for thin glass shell: analysis of the requirements and conceptual design for a segmented active mirror

High fidelity adaptive mirror simulations with reduced order models

Adaptive Optics Tip-Tilt Correction Based on Smith Predictor and Filter-Optimized Linear Active Disturbance Rejection Control Method

Self-optimizing adaptive optics control with Reinforcement Learning

Mirror actively deformed and regulated for applications in space: design and performance