Abstract:For sufficiently wide ranges of applied control signals (control voltages), MEMS and piezoelectric Deformable Mirrors (DMs), exhibit nonlinear behavior. The nonlinear behavior manifests itself in nonlinear actuator couplings, nonlinear actuator deformation characteristics, and in the case of piezoelectric DMs, hysteresis. Furthermore, in a number of situations, DM behavior can change over time, and this requires a procedure for updating the DM models on the basis of the observed data. If not properly modeled and if not taken into account when designing control algorithms, nonlinearities, and time-varying DM behavior, can significantly degrade the achievable closed-loop performance of Adaptive Optics (AO) systems. Widely used approaches for DM control are based on pre-estimated linear time-invariant DM models in the form of influence matrices. Often, these models are not being updated during system operation. Consequently, when the nonlinear DM behavior is excited by control signals with wide operating ranges, or when the DM behavior changes over time, the state-of-the-art DM control approaches relying upon linear control methods, might not be able to produce a satisfactory closed-loop performance of an AO system. Motivated by these key facts, we present a novel method for data-driven DM control. Our approach combines a simple open-loop control method with a recursive least squares method for dynamically updating the DM model. The DM model is constantly being updated on the basis of the dynamically changing DM operating points. That is, the proposed method updates both the control actions and the DM model during the system operation. We experimentally verify this approach on a Boston Micromachines MEMS DM with 140 actuators. Preliminary experimental results reported in this manuscript demonstrate good potential for using the developed method for DM control.

Servo-fluid-elastic modeling of contactless levitated adaptive secondary mirrors

Novel Electro-Hydraulic Position Control System for Primary Mirror Supporting System

A Compact and High-Precision Method for Active Beam Stabilization System

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Experiments on Quasi-Static and Dynamic Control of a PVDF Laminated Membrane-Like Mirror

The Actuator Design and the Experimental Tests of a New Technology Large Deformable Mirror for Visible Wavelengths Adaptive Optics

Model of Electrostatic Actuated Deformable Mirror Using Strongly Coupled Electro-Mechanical Finite Element

A novel method for adaptive control of deformable mirrors

High fidelity adaptive mirror simulations with reduced order models

Learning Approach for Flexible Spherical/Aspherical Reflective Surface Control

Design and Simulation of a 19-Electrode MEMS Piezoelectric Thin-Film Micro-Deformable Mirror for Ophthalmology

Research on Active Control for Thermal Deformation of Precise Membrane Reflector With Boundary SMA Actuators

Ferrofluid Based Deformable Mirrors - a New Approach to Adaptive Optics Using Liquid Mirrors

Active vibration control of a polyvinylidene fluoride laminated membrane plate mirror

Design Evaluation and Dynamic Modeling of Double Objective-Lenses Microsuspension Actuators

Modeling and Simulation of Two-Dimensional MOEMS Scanning Mirror

Optical calibration of large format adaptive mirrors

Preliminary Control-Oriented Modeling of the ITER Steering Mirror Assembly and Local Control System in the Electron Cyclotron Heating & Current Drive Actuator

Dynamic response of ferrofluidic deformable mirrors using elastomer membrane and overdrive techniques

Simulative and Experimental Characterization of an Adaptive Astigmatic Membrane Mirror

Response Analysis of a 2D MEMS Electromagnetically Driven Micro-Mirror