Abstract:The inherent dispersion of the glass utilized in lens construction necessitates applying various techniques to eliminate aberrations. Prior research has traditionally concentrated on single-spectrum applications, targeting either the visible or infrared region. In this study, we designed and conducted numerical simulations of an achromatic lens designed for the UV-visible spectrum, employing unconventional materials such as silicon nitride (Si3N4) and aluminum oxide (Al2O3). The Si3N4 serves as the equivalent of Flint glass, offering a high refractive index and a relatively lower Abbe number. Its transparent window extends from the deep ultraviolet (UV) range and covers the entire visible spectrum. Conversely, Al2O3 is well-suited for use as crown glass, given its lower refractive index than Si3N4 and a higher Abbe number, and Al2O3 remains transparent from the UV region till the mid-infrared region. Combining these two materials should yield an achromatic lens with eliminated chromatic aberrations. Therefore, lens design started with the achromat equations, and further optimizations were done using Opticstudio Zemax, a ray tracing software. The Seidel diagram and focal variation graph offered realistic validation of our study's complete reduction of aberrations, and good focusing efficiency was achieved. The operational wavelengths in our study encompass a range from 360 nm to 633 nm, encompassing both the ultraviolet and visible spectra. Our work may apply to futuristic broadband imaging systems, collimators, and spectrometers.

Design of the Primary Structure of the Birefringent Lens with the Concept of Pseudo-Chromatic Aberration and the PW Method

The Primary Structure Design of A Birefringent Lens with the Concept of Pseudo-Chromatic Aberration

Design of objective lens with reflective spherical Fresnel zone plate

PWC Primary Aberration Expression of Thin Lens System Including Diffractive Optical Elements

A high birefringence liquid crystal for lenses with large aperture

Symmetrical Optical Imaging System with Bionic Variable-Focus Lens for Off-Axis Aberration Correction

Spherical Lens with Binary Optical Element for Visible and UV Dual-Band Optical System

Bionic Optical Imaging System with Aspheric Solid–liquid Mixed Variable-Focus Lens

Design and testing of optical inspection lens with large-field and high resolution

Apochromatic Lens Design in the Short-Wave Infrared Band Using the Buchdahl Dispersion Model.

Doublet liquid variable-focus lens for spherical aberration correction

Design And Analysis Of A Pair Of Prisms For Widening The Imaging Range Of An Optical System

Design, Fabrication and Analysis of a Hybrid-Order Monolithic Imaging Diffractive Lens on a Germanium Substrate

Cascaded chiral birefringent media enabled planar lens with programable chromatic aberration

Design of a Broadband Achromatic Dielectric Metalens for Linear Polarization in the Near-Infrared Spectrum

Aberration-corrected Lens Design in the Ultraviolet-Visible Regime

Hybrid Diffractive-refractive Apochromatic Telescope Objectives Design Using PWC Method

First-order aberration of a double-focus lens made of a uniaxial crystal

An achromatic method for optical imaging objective with long focal depth based on hybrid refractive-diffractive principle

VIS-NIR Superachromatic Triplet Design with Five-Color Correction for a Broadband Interferometer

Optical System Design of Telescope Based on Mixed Modulation Diffractive Lens