Abstract:A biomimetic system using polymer lenses for the optical design and application is developed. The system mainly consisted of a bionic cornea lens, voice coil motor, compression ring, bionic crystalline lens, substrate, and CCD sensor. By controlling the current of the voice coil motor, we could change the motion of the compression ring to alter the curvature radius of the bionic crystalline lens, thus adjusting the focal length of the whole system. The integrated constructure of the optical system was presented, as well as the detailed description of the lens composition, material, and fabrication process. Images under different displacement loads were captured, the relationship among the curvature radius, observed back focal length, and predicted effective focal length was analyzed, and the spot diagram of the optical system was simulated using ZEMAX software. The focal length of the optical system ranged from 17.3 to 24.5 mm under a tiny displacement load from 0 to 0.14 mm. Besides, the images captured at different rotating angles presented almost identical patterns and the same image quality, which showed good robustness to the gravity. The biomimetic optical system is of interest to develop an integrated, low-cost, and stable imaging system. (C) 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)

Spherical Lens with Binary Optical Element for Visible and UV Dual-Band Optical System

Design and Application of Binary Hybrid Optical System Used in the Visible Spectra

Design of objective lens with reflective spherical Fresnel zone plate

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Bionic Optical Imaging System with Aspheric Solid–liquid Mixed Variable-Focus Lens

A New Way Of Fabricating Spectacle Lens Using Binary Diffraction Optics Technology

Optical Design of a Triple-Waveband Hybrid System

Application and Research of Harmonic Diffractive/Refractive Optics in Visible Spectrum

Design of Broadband and Wide-angle Non-polarization Beamsplitter

Design and testing of optical inspection lens with large-field and high resolution

Symmetrical Optical Imaging System with Bionic Variable-Focus Lens for Off-Axis Aberration Correction

Binary photon sieve

Biomimetic optical system using polymer lenses with tunable focus

Doublet liquid variable-focus lens for spherical aberration correction

Binary optical elements used for agile beam transformation and their application

The design of bi-aspherical single objective lens with numerical aperture of 0.85

Hybrid Singlet Lens Applied To Visible Telescope Objective Design

Design of the Primary Structure of the Birefringent Lens with the Concept of Pseudo-Chromatic Aberration and the PW Method

Design of Aspherical Objective Lens for Blue-ray OPU

Design of a Hybrid Refractive/Diffractive Lens System for Broadband UV

Multiring Pure-Phase Binary Optical Elements to Extend Depth of Focus.