Abstract:The wide-angle lens is widely used with the advantage of a large field of view, but it is difficult to solve the problem of large distortion. Therefore, the research on how to design a wide-angle low-distortion lens with excellent imaging quality is very meaningful. In this paper, we propose a high-performance wide-angle small distortion optical system, which has a horizontal field angle of 110 degrees and a vertical field angle of 77 degrees, focal length of 2.03mm, f number of 1.65, and a total length of 16.5mm. By introducing a non-rotational symmetric freeform surface into the last side of the wide-angle optical system and combining with several even aspheric surfaces, the f-tan(theta) distortion in the X direction is controlled to -6%similar to+1%, and the f-tan(theta) distortion in the Y direction is controlled to less than 1%. At the same time, the MTF of the system is greater than 0.35 at 125lp/mm, so that the circular image plane can better adapt to the rectangular sensor. In addition, due to the introduction of the freeform surface in the system, the change of system structure with temperature becomes more complex. We carry out thermal analysis for this surface and calculate the change of structure with temperature. Finally, we completed the athermalized design of the lens, so that the wide-angle lens can work in the range of -40 degrees C similar to+80 degrees C. This optical system has great development potential in security monitoring, UAV detection and other fields that may encounter extreme environments.

The design of bi-aspherical single objective lens with numerical aperture of 0.85

Design of objective lens with reflective spherical Fresnel zone plate

Design of Large Field of View and High Numerical Aperture Microscope Objective

Design and testing of optical inspection lens with large-field and high resolution

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of a Panoramic Annular Lens with a Long Focal Length.

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Design of a Panoramic Annular Lens with a Horizontal Symmetric FOV

Spherical Lens with Binary Optical Element for Visible and UV Dual-Band Optical System

Design of reflective lens with Zernike polynomial free form surfaces

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design of three-focus single objective lens used in DVD pick-up head

Design Of Hybrid Refractive-Diffractive Objective With Super Wide Angle And Fast F-Number

Designing an optical disk lens without analytical definition of aspheric surfaces.

Design of Aspherical Objective Lens for Blue-ray OPU

Doublet liquid variable-focus lens for spherical aberration correction

Design of Aspherical Lens for Optical Imaging System of DVD

Symmetrical Optical Imaging System with Bionic Variable-Focus Lens for Off-Axis Aberration Correction

Design And Fabrication of High Numerical Aperture And Low Aberration Bi-Convex Micro Lens Array