Design and Testing of a Compact Optical Prism Module for Multi-Degree-of-Freedom Grating Interferometry Application
Xinghui Li,Xiang Xiao,Haiou Lu,Kai Ni,Qian Zhou,Xiaohao Wang
DOI: https://doi.org/10.3390/app8122495
2019-01-01
Abstract:In this research, a key optical component for multi-degree-of-freedom (MDOF) surface encoder was designed, fabricated and evaluated. In a MDOF grating interferometry system, there are four diffraction beams from a two-axis scale grating and reference grating, respectively. For further modulation, these beams will propagate more than 100 mm, which makes paralleling these beams necessary. In previous research, collimation lens, separate prisms and a home fabricated diffraction device by combining four separate one-axis line gratings in a glass substrate have been demonstrated. However, large power loss and assembly complicity makes these techniques less competitive. For solving this problem, this research proposed a new lens module, which is an improved type prism, quadrangular frustum pyramid (QFP) prism. The prism is designed in such a way that these four reflected beams from the grating are symmetrically incident into the prism through the upper surface, total reflected on the inner sides of the prism, and then parallel getting through the bottom surface. A prism that allows an incident beam diameter of 1 mm and four paralleling beams with a 10 mm distance between the two diffraction beams along one direction was designed, fabricated and tested. Testing results based on an entire grating interferometry system verified that the proposal in this research is greatly effective in beam paralleling in terms of less power loss and high paralleling and greatly reduces the assembly complicity, which will eventually be beneficial for grating interferometry application.