Abstract:In this paper, we proposed a general direct design method for three-dimensional freeform surfaces and freeform imaging systems based on a construction-iteration process. In the preliminary surfaces-construction process, the coordinates as well as the surface normals of the data points on the multiple freeform surfaces can be calculated directly considering the rays of multiple fields and different pupil coordinates. Then, an iterative process is employed to significantly improve the image quality or achieve a better mapping relationship of the light rays. Three iteration types which are normal iteration, negative feedback and successive approximation are given. The proposed construction-iteration method is applied in the design of an easy aligned, low F-number off-axis three-mirror system. The primary and tertiary mirrors can be fabricated on a single substrate and form a single element in the final system. The secondary mirror is simply a plane mirror. With this configuration, the alignment difficulty of a freeform system can be greatly reduced. After the preliminary surfaces-construction stage, the freeform surfaces in the optical system can be generated directly from an initial planar system. Then, with the iterative process, the average RMS spot diameter decreased by 75.4% compared with the system before iterations, and the maximum absolute distortion decreased by 94.2%. After further optimization with optical design software, good image quality which is closed to diffraction-limited is achieved. (C) 2015 Optical Society of America

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design of a Low F-number Freeform Off-Axis Three-Mirror System with Rectangular Field-of-view

Design method of freeform off-axis three-mirror reflective imaging systems

Construction of freeform mirrors for an off-axis telecentric scanning system through multiple surfaces expansion and mixing

Design of a Panoramic Annular Lens System with an Ultra-Wide Angle Via an Annular Gaussian Radial Basis Function Freeform Surface.

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Direct design of freeform surfaces and freeform imaging systems with a point-by-point three-dimensional construction-iteration method.

Design of A Freeform, Dual Fields-Of-View, Dual Focal Lengths, Off-Axis Three-Mirror Imaging System with A Point-By-Point Construction-Iteration Process

Design of freeform imaging systems with linear field-of-view using a construction and iteration process.

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Design of reflective lens with Zernike polynomial free form surfaces

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of a Panoramic Annular Lens with a Horizontal Symmetric FOV

Optical design of the freeform reflective imaging system with wide rectangular FOV and low F-number

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Design Method of Surface Contour for A Freeform Lens with Wide Linear Field-Of-View

Design of a Large Field of View and Low-Distortion Off-Axis Optical System Based on a Free-Form Surface

Design Method for Freeform Off-Axis Three-Mirror Anastigmat Optical Systems with a Large Field of View and Low Error Sensitivity

Multiple surface expansion method for design of freeform imaging systems.