Abstract:Reflective imaging systems form an important part of photonic devices such as spectrometers, telescopes, augmented and virtual reality headsets or lithography platforms. Reflective optics provide unparalleled spectral performance and can be used to reduce overall volume and weight. So far, most reflective designs have focused on two or three reflections, while four-reflection freeform designs can deliver a higher light throughput (faster F-number) as well as a larger field-of-view (FOV). However, advanced optical design strategies for four-reflection freeform systems have been rarely reported in literature. This is due to the increased complexity in solution space but also the fact that additional mirrors hinder a cost-effective realization (manufacture, alignment, etc.). Recently, we have proposed a novel design method to directly calculate the freeform surface coefficients while merely knowing the mirror positions and tilts. Consequently, this method allows laymen with basic optical design knowledge to calculate 'first time right' freeform imaging systems in a matter of minutes. This contrasts with most common freeform design processes, which requires considerable experience, intuition or guesswork. Firstly, we demonstrate the effectiveness of the proposed method for a four-mirror high-throughput telescope with 250mm-focal-length, F/2.5 and a wide rectangular FOV of 8.5° x 25.5°. In a subsequent step, we propose an effective three-mirror but four-reflection imaging system, which consists of two freeform mirrors and one double-reflection spherical mirror. Compared with common three-mirror and three-reflection imagers, our novel multi-reflection system shows unprecedented possibilities for an economic implementation while drastically reducing the overall volume.

Design of a Low F-number Freeform Off-Axis Three-Mirror System with Rectangular Field-of-view

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Compact Freeform Off-Axis Three-Mirror Imaging System Based on the Integration of Primary and Tertiary Mirrors on One Single Surface

Optical design of the freeform reflective imaging system with wide rectangular FOV and low F-number

Design method of freeform off-axis three-mirror reflective imaging systems

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design of A Freeform, Dual Fields-Of-View, Dual Focal Lengths, Off-Axis Three-Mirror Imaging System with A Point-By-Point Construction-Iteration Process

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

Design of reflective lens with Zernike polynomial free form surfaces

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Construction of freeform mirrors for an off-axis telecentric scanning system through multiple surfaces expansion and mixing

Highly compact optical design of an off-axis three-mirror system with freeform surfaces

Design of a Large Field of View and Low-Distortion Off-Axis Optical System Based on a Free-Form Surface

Design Method of Freeform Off-Axis Multi-Mirror Optical Systems

Design of a Panoramic Annular Lens System with an Ultra-Wide Angle Via an Annular Gaussian Radial Basis Function Freeform Surface.

Optical Design of a Triple-Waveband Hybrid System

Design Method for Freeform Off-Axis Three-Mirror Anastigmat Optical Systems with a Large Field of View and Low Error Sensitivity

Application of Freeform Surfaces in Designing Off-axis Reflective Space Optical Imaging Systems

Freeform imaging system design with multiple reflection surfaces

Spatial Three-Mirror Off-Axis Freeform Optical System Without Any Symmetry

Direct design of freeform surfaces and freeform imaging systems with a point-by-point three-dimensional construction-iteration method.