Cytotoxic biflavonoids from Selaginella willdenowii.

Gloria L. Silva,Heebyung Chai,M. Gupta,Norman R. Farnsworth,Geoffrey A. Cordell,J. Pezzuto,Christopher W. W. Beecher,A. Kinghorn

DOI: https://doi.org/10.1016/0031-9422(95)00212-P

IF: 3.8

1995-09-01

Phytochemistry

Abstract:

What problem does this paper attempt to address?

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

Tong Yang,Jun Zhu,Wei Hou,Guofan Jin

DOI: https://doi.org/10.1364/oe.22.009193

IF: 3.8

2014-01-01

Optics Express

Abstract:In this paper, a novel method is proposed to design the freeform off-axis reflective imaging systems. A special algorithm is demonstrated to calculate the data points on the unknown freeform surface using the rays from multiple fields and different pupil coordinates. These points are used to construct the multiple three-dimensional freeform surfaces in an imaging system which works for a certain object size and a certain width of light beam. An unobscured design with freeform surfaces can be obtained directly with this method, and it can be taken as a good starting point for further optimization. The benefit of this design method is demonstrated by designing a freeform off-axis three-mirror imaging system with high performance and system specifications. The final system operates at F/1.49 with a 64mm entrance pupil diameter and an 8° × 9° field-of-view (FOV). The performance of the system is diffraction limited at LWIR (long-wavelength-infrared).
Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Wei Hou,Jun Zhu,Tong Yang,Guofan Jin

DOI: https://doi.org/10.1088/2040-8978/17/5/055603

IF: 2.1

2015-01-01

Journal of Optics

Abstract:In this paper, a construction method through forward and reverse ray tracing for a design of ultra-wide linear field-of-view (FOV) off-axis freeform systems is proposed. The freeform initial system is numerically constructed by a point-by-point calculation. This method begins with a spherical system solved by the paraxial optical theory. In this method, the primary mirror is calculated through the reverse ray tracing; hence, the size and position of the aperture stop is not affected by the changes of mirrors. The fields in the reverse system are selected to cause certain beam overlaps on the primary mirror between adjacent fields. These overlaps offer a more uniform distribution of data points, improving the calculation of this mirror. As an example, an off-axis freeform system with an ultra-wide linear field-of-view of 70 degrees is designed by this method. The effective focal length of the system is 75 mm, and the F-number is 5.8. The diffraction-limited performance of this freeform system in the visible band and the near infrared and near ultraviolet bands validate the construction method presented in this paper.
Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Zhenrong Zheng

DOI: https://doi.org/10.1016/j.ijleo.2010.02.011

IF: 3.1

2011-01-01

Optik

Abstract:In this paper, an off-axis reflective projection lens with single Fresnel reflective surface and three aspheric surfaces were designed. The design method of reflective lens using spherical Fresnel surface is discussed. The MTF (Modulation Transfer Function) of the off-axis reflective lens, with optical magnification 100×, F-number 2.5 and field of view 120°, is over 40% at 0.6lp/mm on the image side, the distortion is less than 2%. This design method can provide reference for application of Fresnel surface in wide field of view imaging, and possesses a bright future with the continuous development of fabrication technique.
Design of reflective lens with Zernike polynomial free form surfaces

ZHENG Zhen-rong,SUN Xu-tao,MIAO Ying-ying,GU Pei-fu,LIU Xu

DOI: https://doi.org/10.3785/j.issn.1008-973X.2008.12.031

2008-01-01

Abstract:In order to study the problem that free form surfaces are hard to be applied in the design of image system,an off-axis reflective lens composed with Zernike polynomials free form mirrors was designed by the wave-front analysis for Zernike polynomials free form surfaces.Based on the analysis of aspheric off-axis lens,Zernike polynomials was used to describe the free form shape mirror,and the aberration which was analyzed to match with Seidel aberration was used to design the free form reflective lens.A reflective projection lens was constructed with three Zernike polynomials free form shape mirrors,with layout of "concave-convex-convex",and the lens was telecentric in object space.Furthermore,the lens's performance was analyzed,under the condition of relative aperture of 2.5 and angle of view of 130°, the module transfer function(MTF) was over 60% at 100 lp/mm on magnification side,and the distortion was less than 2%.Design result showed that using Zernike polynomials free form surface can dramatically decrease the aberration of off-axis lens,simplify the configuration and increase the definition of image system.
Design Method of Freeform Off-Axis Multi-Mirror Optical Systems

Xinyu Liu,Jun Zhu

DOI: https://doi.org/10.3390/photonics9080534

IF: 2.536

2022-01-01

Photonics

Abstract:A data point calculation method that does not require the use of Fermat's principle and a simple and general design method of starting points of freeform off-axis multi-mirror optical systems are proposed in this paper, which aim to promote the realization of high-performance reflective systems containing freeform surfaces. Taking a planar system and the required parameters as the input, a good starting point for a freeform off-axis multi-mirror system can be automatically obtained using the proposed method. The design of a freeform off-axis five-mirror system with a low F-number is taken as an example to show the effectiveness of the proposed method. The method can also be used for the design of freeform reflective systems with other numbers of mirrors.
Freeform imaging system design with multiple reflection surfaces

Yunfeng Nie,David R. Shafer,Heidi Ottevaere,Hugo Thienpont,Fabian Duerr

DOI: https://doi.org/10.1364/OE.426207

2020-11-30

Abstract:Reflective imaging systems form an important part of photonic devices such as spectrometers, telescopes, augmented and virtual reality headsets or lithography platforms. Reflective optics provide unparalleled spectral performance and can be used to reduce overall volume and weight. So far, most reflective designs have focused on two or three reflections, while four-reflection freeform designs can deliver a higher light throughput (faster F-number) as well as a larger field-of-view (FOV). However, advanced optical design strategies for four-reflection freeform systems have been rarely reported in literature. This is due to the increased complexity in solution space but also the fact that additional mirrors hinder a cost-effective realization (manufacture, alignment, etc.). Recently, we have proposed a novel design method to directly calculate the freeform surface coefficients while merely knowing the mirror positions and tilts. Consequently, this method allows laymen with basic optical design knowledge to calculate 'first time right' freeform imaging systems in a matter of minutes. This contrasts with most common freeform design processes, which requires considerable experience, intuition or guesswork. Firstly, we demonstrate the effectiveness of the proposed method for a four-mirror high-throughput telescope with 250mm-focal-length, F/2.5 and a wide rectangular FOV of 8.5° x 25.5°. In a subsequent step, we propose an effective three-mirror but four-reflection imaging system, which consists of two freeform mirrors and one double-reflection spherical mirror. Compared with common three-mirror and three-reflection imagers, our novel multi-reflection system shows unprecedented possibilities for an economic implementation while drastically reducing the overall volume.

Optics,Instrumentation and Methods for Astrophysics
Direct design of freeform surfaces and freeform imaging systems with a point-by-point three-dimensional construction-iteration method.

Tong Yang,Jun Zhu,Xiaofei Wu,Guofan Jin

DOI: https://doi.org/10.1364/OE.23.010233

IF: 3.8

2015-01-01

Optics Express

Abstract:In this paper, we proposed a general direct design method for three-dimensional freeform surfaces and freeform imaging systems based on a construction-iteration process. In the preliminary surfaces-construction process, the coordinates as well as the surface normals of the data points on the multiple freeform surfaces can be calculated directly considering the rays of multiple fields and different pupil coordinates. Then, an iterative process is employed to significantly improve the image quality or achieve a better mapping relationship of the light rays. Three iteration types which are normal iteration, negative feedback and successive approximation are given. The proposed construction-iteration method is applied in the design of an easy aligned, low F-number off-axis three-mirror system. The primary and tertiary mirrors can be fabricated on a single substrate and form a single element in the final system. The secondary mirror is simply a plane mirror. With this configuration, the alignment difficulty of a freeform system can be greatly reduced. After the preliminary surfaces-construction stage, the freeform surfaces in the optical system can be generated directly from an initial planar system. Then, with the iterative process, the average RMS spot diameter decreased by 75.4% compared with the system before iterations, and the maximum absolute distortion decreased by 94.2%. After further optimization with optical design software, good image quality which is closed to diffraction-limited is achieved. (C) 2015 Optical Society of America
Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Rengmao Wu,Shengqian Chang,Zhenrong Zheng,Liefeng Zhao,Xu Liu

DOI: https://doi.org/10.1364/ol.43.001619

IF: 3.6

2018-01-01

Optics Letters

Abstract:Two freeform surfaces provide more degrees of freedom in designing illumination optics and can yield a better solution. The existing methods for point-like sources are mostly valid in designing one freeform surface. Designing two freeform surfaces for point-like sources still remains a challenging issue. In this Letter, we develop a general formulation of designing two freeform lens surfaces for point-like sources. The proposed method is very robust in designing freeform lenses with two elaborately designed surfaces. The examples clearly show that using two freeform surfaces yields better solutions to challenging illumination problems with ultra-high energy efficiency.
Design of a Low F-number Freeform Off-Axis Three-Mirror System with Rectangular Field-of-view

Jun Zhu,Wei Hou,Xiaodong Zhang,Guofan Jin

DOI: https://doi.org/10.1088/2040-8978/17/1/015605

IF: 2.1

2014-01-01

Journal of Optics

Abstract:In this paper, a low F-number freeform off-axis three-mirror system with rectangular field-of-view (FOV) is presented, and the system has an integrated configuration that can be aligned with ordinary methods. The initial structure is solved analytically, and the optimization process is described in detail. This F/1.38 freeform system with a 4 degrees x 5 degrees FOV provides good imaging performance, especially in middle-wave and long-wave infrared bands. The primary mirror and the tertiary mirror are approximately tangent, so these two freeform mirrors can be fabricated on a single substrate. This configuration provides a solution to the practical application of freeform off-axis three-mirror systems. Additionally, a prototype of this system is demonstrated, and the imaging performance of the prototype is tested experimentally. The actual performance of the prototype is discussed and analyzed.
Compact Freeform Off-Axis Three-Mirror Imaging System Based on the Integration of Primary and Tertiary Mirrors on One Single Surface

Tong Yang,Jun Zhu,Guofan Jin

DOI: https://doi.org/10.3788/col201614.060801

IF: 2.56

2016-01-01

Chinese Optics Letters

Abstract:In this Letter, a novel and compact freeform off-axis three-mirror imaging system and its detailed design method are proposed. The primary mirror and tertiary mirror of the system have the same surface analytical expression and they are integrated on one single freeform surface. In this way, the alignment process is made much easier due to the much fewer degrees of freedom. In addition, the difficulty and cost for the data handling, fabrication,and testing of the freeform surfaces and system can also be significantly reduced in some cases, especially compared with the configuration having multiple surfaces of different expressions integrated on one monolithic substrate. The final system has a 100 mm effective focal length and a 4°× 3° field of view. The modulation transfer function of the system is close to the diffraction-limit.
Design of A Freeform, Dual Fields-Of-View, Dual Focal Lengths, Off-Axis Three-Mirror Imaging System with A Point-By-Point Construction-Iteration Process

Tong Yang,Jun Zhu,Guofan Jin

DOI: https://doi.org/10.3788/col201614.100801

IF: 2.56

2016-01-01

Chinese Optics Letters

Abstract:In this Letter,we propose a novel configuration and design method of freeform,dual fields-of-view(FOVs),dual focal lengths,off-axis three-mirror zoom imaging systems.The switch of the two zooms is achieved by rotating a single mirror element.The design of a freeform,dual focal lengths zoom system is realized by a point-by-point design approach for the first time to our knowledge.This method enables the direct design of freeform surfaces from initial planes using given system specifications and configuration,and the designed system can be taken as a good starting point for further optimization.A freeform,dual FOVs,dual focal lengths,off-axis three-mirror zoom system is demonstrated.The F-numbers of the two zooms are 2 and 2.4.The dual FOVs are 3°×3°and2.5°×2.5°.After final optimization,both of the zooms achieve high performances.
A Design Method of the Distortionless Catadioptric Panoramic Imaging Based on Freeform Surface

Wu Yi-si,Li An,Chen Chi,Shen Jun-fei,Bian Yin-xu,Zheng Zhen-rong

DOI: https://doi.org/10.1117/12.2071600

2014-01-01

Abstract:A design method for the distortionless catadioptric panoramic imaging system is proposed in this paper. The panoramic system mainly consists of two parts, a reflecting surface system with relay lens and a CCD camera. A mapping relationship between the real image plane and the projection surface is established to acquires low distorted imaging features easily. And the design of freeform surface is applied to the reflecting surfaces to correct distortion. After iteratively optimize the freeform surfaces, the image quality is gradually improved. The simulation results show that compared with traditional system, the new freeform surface system has simple design, attaining higher performance and has the advantage of small scene distortion and making the image more suitable and convenient for observing.
Towards Automatic Freeform Optics Design: Coarse and Fine Search of the Three-Mirror Solution Space

Benqi Zhang,Guofan Jin,Jun Zhu

DOI: https://doi.org/10.1038/s41377-021-00510-z

2021-01-01

Light Science & Applications

Abstract:Design of an optical system, whether classic or novel, in the past or the present, requires significant effort from the designer. In addition to design methods and theories, the designer's skills and experience in optical system design are particularly important, which may require years of practice to learn. The diversity and variety of results are limited because of the difficulty, time, and labor costs required. In this article, we propose an automatic design method for freeform optics that can achieve a diverse range of three-mirror designs. The optical specifications and the design constraints are the only inputs required, and a variety of results can be obtained automatically. The output results have various structures and various optical power distributions with high imaging qualities. By implementing the design method, designers can not only realize an overview of the solution space of the three-mirror freeform system, but can also focus on specific designs.
Designing Two Freeform Surfaces with Monge–Ampère Equation Method for Point-Like Sources

Rengmao Wu,Shengqian Chang,Zhanghao Ding,Zhenrong Zheng

DOI: https://doi.org/10.1117/12.2309752

2018-01-01

Abstract:Two freeform surfaces provide more degrees of freedom in designing illumination optics and can yield a better solution. The existing methods for point-like sources are mostly valid in designing one freeform surface. Designing two freeform surfaces for point-like sources still remains a challenging issue. In this letter we develop a general formulation of designing two freeform lens surfaces for point-like sources. The proposed method is very robust in designing freeform lenses with two elaborately designed surfaces. The examples clearly show that using two freeform surfaces yields better solutions to challenging illumination problems with ultra-high energy efficiency.
Design Method for Freeform Off-Axis Three-Mirror Anastigmat Optical Systems with a Large Field of View and Low Error Sensitivity

Chengming Ren,Qingyu Meng

DOI: https://doi.org/10.3390/photonics11030211

IF: 2.536

2024-02-27

Photonics

Abstract:A freeform off-axis three-mirror anastigmat (TMA) optical system with a large field of view (FOV) can obtain target image information with a larger spatial range and more spatial details, which is a development trend within the realm of space optics. The optical aberration increases exponentially with the FOV, resulting in a significant increase in error sensitivity for large-FOV optical systems. To address this issue, a method for designing optical systems with a large FOV and low error sensitivity is proposed. The FOV is gradually expanded from a small initial value in equal-length increments until it reaches the full FOV. At each step, the error sensitivity is recalculated and controlled to a lesser extent than in the previous step. In this design process, the freeform surface is used to correct the aberration and obtain low error sensitivity. An optical system with a focal length of 1000 mm and an F-number of 10 is used as an example, and the FOV is enlarged from 5° × 1°to 20° × 4°. The design results show that the modulation transfer function (MTF) of the optical system can reach 0.45@50 lp/mm, and the average wavefront aberration is 0.029λ. After four rounds of FOV expansion and error sensitivity optimization, the error sensitivity is reduced by 37.27% compared to the initial system, which verifies the correctness and practicality of the method.

optics
Application of Freeform Surfaces in Designing Off-axis Reflective Space Optical Imaging Systems

Jun ZHU,Xiaofei WU,Wei HOU,Tong YANG,Guofan JIN

DOI: https://doi.org/10.3969/j.issn.1009-8518.2016.03.001

2016-01-01

Abstract:In the field of space optics which is closely related to aeronautics and astronautics, off-axis reflective imaging systems are attracting more and more researchers’ attention due to their various advantages. Compared with traditional spheres and aspheres, freeform surfaces have higher degrees of design freedom, and are capable of correct a variety of asymmetric aberrations. Therefore, freeform surfaces have full capability of designing the off-axis reflective imaging systems, and furthermore they have the potential to meet some high-end or special requirements in space optics. Improving optical performance and realizing special structure are two main application directions of freeform surfaces in space optics. In this paper, following the two directions and aiming at some real requirements of space optical imaging systems, including low F-number, wide field-of-view, compact structure, having a real exit pupil and afocal system, the authors have selected several representative freeform off-axis reflective imaging systems, and emphatically introduced their system configurations, optical performance, and application advantages in space optics.
Starting Configuration Design Method of Freeform Imaging and Afocal Systems with A Real Exit Pupil

Tong Yang,Jun Zhu,Guofan Jin

DOI: https://doi.org/10.1364/ao.55.000345

IF: 1.9

2016-01-01

Applied Optics

Abstract:Optical system configurations with a real exit pupil have important applications. However, there are few effective design methods of these systems for choice, especially for the systems using freeform surfaces. In this paper, we propose a novel starting configuration design method of freeform optical systems with a real exit pupil before the image plane. This method works for both the cases of imaging systems with optical power and afocal systems. Each single freeform surface in the starting configuration is generated directly using the light rays of multiple fields and different pupil coordinates. With a proposed multi-step design strategy, not only the given system specifications and the desired object-image relationships (or magnification for the afocal system) are achieved, the generation of a real, small-distorted exit pupil with a given size and shape (which means the imaging relationships of the pupils) can be also considered. The system generated by this method can be taken as a good starting configuration for further optimization. The benefits and feasibility of this design method are demonstrated by two design examples. One example is a freeform off-axis three-mirror imaging system. The other example is a freeform off-axis three-mirror afocal telescope. Both of the systems have a modulation transfer function (MTF) that is closed to the diffraction limit.
Design Method for Freeform Reflective-Imaging Systems with Low Surface-Figure-error Sensitivity

Yuting Deng,Guofan Jin,Jun Zhu

DOI: https://doi.org/10.3788/col201917.092201

IF: 2.56

2019-01-01

Chinese Optics Letters

Abstract:Freeform surfaces are difficult to manufacture due to their lack of rotational symmetry. To reduce the requirements for manufacturing precision, a design method is proposed for freeform reflective-imaging systems with low surface-figure-error sensitivity. The method considers both the surface-figure-error sensitivity and optical specifications, which can design initial systems insensitive to surface figure errors. Design starts with an initial planar system; the surface-figure-error sensitivity of the system is reduced during construction. The proposed method and another that is irrelevant to figure-error sensitivity are used to design a freeform off-axis three-mirror imaging system. Comparison of the sensitivities of the two systems indicates the superiority of our proposed method.
Construction of freeform mirrors for an off-axis telecentric scanning system through multiple surfaces expansion and mixing

Lu Chen,Zhishan Gao,Ningyan Xu,Xin Cao,Jianping Zhang,Lingjie Wang,Jingfei Ye,Qun Yuan,Lu Chen,Zhishan Gao,Ningyan Xu,Xin Cao,Jianping Zhang,Lingjie Wang,Jingfei Ye,Qun Yuan

DOI: https://doi.org/10.1016/j.rinp.2020.103354

IF: 4.565

2020-12-01

Results in Physics

Abstract:<p>In this paper, a direct design method for an off-axis two-mirror telecentric scanning system with a linear field of view (FOV) is proposed. A single freeform mirror structure is firstly considered, in which the aberration free geometry of the off-axis parabolic (OAP) surface is leveraged to provide the focusing function and build surface contour of the sub-region on the mirror for each FOV. Multiple OAP surfaces for construction of the freeform mirror are located at an OAP base to satisfy the telecentric condition. The imaging distortion of this single freeform mirror structure is analyzed and found unavoidable due to the unsymmetrical geometry of the OAP base. A freeform reflective corrector is supplemented, and it is constructed from multiple plane surfaces located at a curved base to fulfill the f-theta scanning geometry. Thus, a two-mirror structure composed of one freeform primary mirror and one freeform reflective corrector is established. Each plane-OAP surfaces pair corresponds to a specific FOV. These multiple OAP surfaces and multiple plane surfaces are then expanded and mixed respectively, to construct the freeform primary mirror and freeform reflective corrector. An f-theta two-mirror freeform scanning system with ± 10.4° linear FOV is designed using the proposed construction method. The design result is diffraction-limited, and a scanning error less than 5 μm and telecentricity angle less than 0.2° are achieved.</p>

physics, multidisciplinary,materials science
Design of a Large Field of View and Low-Distortion Off-Axis Optical System Based on a Free-Form Surface

Bing Jia,Yubing Li,Qiongying Lv,Fan Jin,Chunlin Tian

DOI: https://doi.org/10.3390/photonics10050506

IF: 2.536

2023-04-28

Photonics

Abstract:Free-form surfaces have good aberration correction capability and balance capability for nonrotationally symmetric imaging systems. In this study, we analyzed the quantitative relationship between X–Y polynomial combination and aberration for the efficient design of X–Y free-form optical systems. The purpose of this study was to provide an exhaustive design method for off-axis triple inverse optical systems with X–Y free-form surfaces. Finally, we designed a free-form off-axis optical system with a large field of view (FOV) and low distortion based on the off-axis triple inverse optical system without an intermediate image plane. The primary mirror (PM) of the system adopted an X–Y polynomial free-form surface to correct the aberration of different FOVs of the system and improve the image width and quality. The optical system had a focal length of 1000 mm, an F-value of 9.5, an FOV angle of 23° × 1°, a maximum distortion grid in the FOV less than or equal to −0.05%, and a full-field average wave aberration better than 0.055 λ (λ/18.2, λ = 632.8 nm). The analysis of the design results showed that the system had high-quality imaging and a compact structure. This design method can provide a technical reference for the study of such free-form off-axis systems.

optics

Cytotoxic biflavonoids from Selaginella willdenowii.

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design of reflective lens with Zernike polynomial free form surfaces

Design Method of Freeform Off-Axis Multi-Mirror Optical Systems

Freeform imaging system design with multiple reflection surfaces

Direct design of freeform surfaces and freeform imaging systems with a point-by-point three-dimensional construction-iteration method.

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Design of a Low F-number Freeform Off-Axis Three-Mirror System with Rectangular Field-of-view

Compact Freeform Off-Axis Three-Mirror Imaging System Based on the Integration of Primary and Tertiary Mirrors on One Single Surface

Design of A Freeform, Dual Fields-Of-View, Dual Focal Lengths, Off-Axis Three-Mirror Imaging System with A Point-By-Point Construction-Iteration Process

A Design Method of the Distortionless Catadioptric Panoramic Imaging Based on Freeform Surface

Towards Automatic Freeform Optics Design: Coarse and Fine Search of the Three-Mirror Solution Space

Designing Two Freeform Surfaces with Monge–Ampère Equation Method for Point-Like Sources

Design Method for Freeform Off-Axis Three-Mirror Anastigmat Optical Systems with a Large Field of View and Low Error Sensitivity

Application of Freeform Surfaces in Designing Off-axis Reflective Space Optical Imaging Systems

Starting Configuration Design Method of Freeform Imaging and Afocal Systems with A Real Exit Pupil

Design Method for Freeform Reflective-Imaging Systems with Low Surface-Figure-error Sensitivity

Construction of freeform mirrors for an off-axis telecentric scanning system through multiple surfaces expansion and mixing

Design of a Large Field of View and Low-Distortion Off-Axis Optical System Based on a Free-Form Surface