Abstract:In lidar system, the laser has a divergence angle due to its Gaussian distribution which limits the detection distance. The improvement of lidar detection range is mainly based on the receiver and transmitter. Vertical Cavity Surface Emitting Laser (VCSEL) can form a two-dimensional (2D) array light source, which can realize direct detection without using a single laser for scanning. The structure of the lidar can therefore be simplified and the performance can also be improved. This paper aims to enhance the detection range of lidar by reducing the divergence angle of laser light source through designing an array collimator lens. The collimating lens unit designed is composed of a freeform surface lens and a standard lens, which is arranged in the same way as the light source. The aperture of the lens needs to be less than the distance between each adjacent light source unit, which makes direct calculation difficult. The design process is realized by nonsequential mode simulation by ZEMAX software, and the final design is obtained through the combination of calculation and software optimization. The design result shows that the initial divergence angle of the laser after passing through the lens array is compressed from 24.4° to about 0.7° theoretically, and the overall collimation keeps the energy loss within 20%. Simulation results indicate the design can initially achieve the detection range in a few of kilometers. The research work provides new solutions for light collimation and is helpful for advancing the development of lidar detection.

Design and experimental validation of an aspheric multi-lenticular plano-convex lens for VCSEL beam collimation

Design of Four-fiber Collimator Based on a Variable-curvature Lens

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Long-distance near-infrared VCSEL wireless optical communication system based on collimating lens design

Wide-Angle Beam Steering Based on an Active Conformal Metasurface Lens

Tailoring Freeform Beam-Shaping Lenses for Edge-Emitting Lasers

Chromatically Multi-Focal Optics Based on Micro-Lens Array Design.

Design of Collimation System in Space Laser Communication

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Design and Verification of a Flat-Top Beam Shaper Utilizing Spherical Lenses

Design of an Array Collimating System Based on VCSEL Light Source

Application of Aspherical Liquid Lens in Laser Diode Beam Shaping

Aspherical Anamorphic Lens for Shaping Laser Diode Beam

Beam collimation of laser diode based on double-focus micro-lens

Novel Concave-Based Micro Optical Components

Design of a Multi-Scale Optical Lens

Collimating lens for light-emitting-diode light source based on non-imaging optics.

Beam shaping of vertical cavity surface emitting laser diodes by aspheric microlenses and microlens arrays

A Novel Method of Measuring Convex Aspheric Lens Using Hologram Optical Elements

Modeling and stimulation of high-power double-clad fiber collimator