Some New Lens-Prism Correctors for Prime Focus

YN WANG,DQ SU

1990-01-01

Abstract:Neufs conceptions de correcteurs prisme-lentille et leurs performances sont presentees. Ces correcteurs sont concus pour le foyer principal d'un miroir primaire parabolique f/2 et de 7.5 m d'ouverture.

What problem does this paper attempt to address?

Lens-Prism Correctors For Ritchey-Chretien And Quasi Ritchey-Chretien Foci

su ding qiang,liang ming

DOI: https://doi.org/10.1117/12.963568

1986-01-01

Abstract:Two new lens-prism correctors are designed for secondary foci, of which the diameter of the primary is 7.5 meter, the f-ratio of the primary is 2 and the final f-ratio is about 5.4. The field of view of the R-C system is 46 and that of the quasi R-C system is 1°. These correctors can be used for the correction of both the aberrations and the atmospheric disper-sion. They consist of two cemented lenses. Each cemented lens is made of two different kinds of glasses, of which the indexes of refraction are near and the dispersions are different. The cemented surface is tilted. The two cemented lenses can rotate oppositly around the optical axis for correcting the atmospheric dispersion at different zenith distance. All of surfaces of these correctors are spherical. Spot diagrams of two systems are given for three relative orientations of two cemented lenses, each at nine positions in the field of view, which show both the monochromatic image quality and the effect of correcting the atmospheric dispersion are excellent.
Design of objective lens with reflective spherical Fresnel zone plate

Zhenrong Zheng,Xütao Sun,Peifu Gu,Xü Liu

DOI: https://doi.org/10.1007/s12200-008-0036-y

2008-01-01

Frontiers of Optoelectronics in China

Abstract:An objective lens composed of a spherical Fresnel zone plate mirror and aspheric mirrors is designed. The Fresnel zone plate with a spherical shape is analyzed, and the method to approximately replace the aspherical mirror with spherical Fresnel zone plate is deduced. The objective lens is designed with a single spherical Fresnel zone plate mirror and three aspherical mirrors. Under the condition of 100 × magnification, 2.5 Fresnel number and 120° field angle, the modulation transfer function can reach above 40% at 0.6 line pairs/mm on the magnification side, and the distortion is less than 2.2%. This method can provide a reference for the application of Fresnel zone plate in visible light imaging, and has a bright future with the continuous development of the fabrication technique of Fresnel devices.
Enhanced superprism effect based on positive/negative lateral shift of reflective beam in a Fabry-Perot filter.

Xu Liu,Xuezheng Sun,Peifu Gu

DOI: https://doi.org/10.1364/OL.32.002321

IF: 3.6

2007-01-01

Optics Letters

Abstract:It is found that when a light beam is incident obliquely on a thin film Fabry-Perot filter (FPF) from different incident media (air or substrate), the reflective beam will be shifted in both the forward and the backward directions. Based on this inverted spatial dispersion effect, two thin film FPFs with different directional lateral shifts are assembled to get a thin film superprism with a wider dispersion band. The thin film samples are fabricated as well as tested, and the results are in approximate agreement with numerical simulation. (C) 2007 Optical Society of America.
Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Zhenrong Zheng

DOI: https://doi.org/10.1016/j.ijleo.2010.02.011

IF: 3.1

2011-01-01

Optik

Abstract:In this paper, an off-axis reflective projection lens with single Fresnel reflective surface and three aspheric surfaces were designed. The design method of reflective lens using spherical Fresnel surface is discussed. The MTF (Modulation Transfer Function) of the off-axis reflective lens, with optical magnification 100×, F-number 2.5 and field of view 120°, is over 40% at 0.6lp/mm on the image side, the distortion is less than 2%. This design method can provide reference for application of Fresnel surface in wide field of view imaging, and possesses a bright future with the continuous development of fabrication technique.
Wide-field Corrector for a Gregory Telescope

V.Yu.Terebizh

DOI: https://doi.org/10.48550/arXiv.astro-ph/0605361

2006-05-15

Astrophysics

Abstract:A form of prime focus corrector for the Gregory system is proposed that provides the sub-arcsecond field of view up to 3 degrees in diameter for the spectral range 0.35-0.90 microns. The corrector includes five lenses made of same glass (fused silica is preferable). The distinctive feature of the corrector consists in dissimilar use of the central and edge zones of a front lens disposed in the exit pupil of a two-mirror system. As an example, the f/1.9 telescope is considered with the 6.5-m aperture and the total length 8.8~m. Its primary and secondary mirrors are pure ellipsoids close to concave paraboloid and concave sphere, respectively. In the basic configuration, all surfaces of the corrector are spherical. The diameter of a star image D_{80} varies from 0''.25 on the optical axis up to 0''.50 at the edge of the 2.3-deg field. Only slightly worse images shows spherical corrector for the 2.4-deg field of view. The fraction of vignetted rays grows on 1.7% from the center of field to its edges. Aspherization of some lens surfaces allows to reach sub-arcsecond images in the field of 3.0 in diameter.
Doublet liquid variable-focus lens for spherical aberration correction

Jia-Wei Du,Xuan-Yin Wang,Shi-Qiang Zhu,Dan Liang

DOI: https://doi.org/10.1016/j.ijleo.2016.11.170

IF: 3.1

2017-01-01

Optik

Abstract:A novel doublet liquid variable-focus lens with simple structure was designed and fabricated for spherical aberration correction under the condition of small focal length, which was 11.8 mm to 25 mm. By changing the shape of the two PDMS membranes respectively, the focal length of the proposed lens was changed and the spherical aberration was corrected. The size of the entire lens was very small and overall structure of the proposed lens was presented, as well as the design process. The ZEMAX software was used to optimize the optical parameters of the proposed lens. The deformation of the PDMS membranes was measured and fitted by spherical curve. The longitudinal spherical aberration was measured in experiments and compared with the optimal design results. In order to weaken the gravity effect, we designed the shape of the rear PDMS membrane and presented the detailed description of the fabrication process. (C) 2016 Elsevier GmbH. All rights reserved.
Optical System Design of Telescope Based on Mixed Modulation Diffractive Lens

Fei Li,Xueying Jin,Mengyu Wang,Keyi Wang

DOI: https://doi.org/10.4236/jamp.2018.611193

2018-01-01

Journal of Applied Mathematics and Physics

Abstract:Using of diffractive optical elements (DOE) in the Schupmann system offer a new way for the construction of ultra-large aperture telescope. The Fresnel Corrector, one of the DOEs, is the key device in the Schupmann system, which is used to correct the chromatic aberration introduced by the diffractive primary lens called Magnifying Glass. Generally, in a large aperture telescope (>20 m), the Fresnel Corrector is a diffractive lens with a large aperture and a small f-number, which is difficult to process. In this article, an improved device with a small F number but a large rim feature size, called amplitude and phase hybrid modulation Fresnel diffractive optical element (APHMFDOE), is used here as the Fresnel corrector. First, APHMFDOE with appropriate parameters is designed to match the dispersion of the Magnifying Glass so that the system meets the achromatic condition. Second, the optical characteristics of this improved system are simulated and compared with those of the general system based on the conventional Fresnel corrector. Our approach introduces a new dispersion correction device, which not only can eliminate the chromatic aberration caused by Magnifying Glass, but also can reduce the processing difficulty of Fresnel Corrector.
A corrector design using active vase mirrors that allows a fixed telescope to access a large region of the sky

Gilberto Moretto,Ermanno F. Borra

DOI: https://doi.org/10.1364/AO.36.002114

1997-02-14

Abstract:We investigate whether a three-mirror system, having secondary and the tertiary mirrors with surfaces warped by Zernike polynomials generated by active vase mirrors, is suitable to do the corrections of a fixed parabolic mirror observing at large angles from the zenith. We obtain designs of correctors with remarkable images and control of the distortion of the field of the view contained within a field greater than 15 Deg.

Astrophysics
Design and performance of a F/#-conversion microlens for Prime Focus Spectrograph at Subaru Telescope

Naruhisa Takato,Yoko Tanaka,James E. Gunn,Naoyuki Tamura,Atsushi Shimono,Hajime Sugai,Hiroshi Karoji,Akitoshi Ueda,Kouichi Waseda,Masahiko Kimura,Youichi Ohyama

DOI: https://doi.org/10.48550/arXiv.1408.2867

2014-08-12

Instrumentation and Methods for Astrophysics

Abstract:The PFS is a multi-object spectrograph fed by 2394 fibers at the prime focus of Subaru telescope. Since the F/# at the prime focus is too fast for the spectrograph, we designed a small concave-plano negative lens to be attached to the tip of each fiber that converts the telescope beam (F/2.2) to F/2.8. We optimized the lens to maximize the number of rays that can be confined inside F/2.8 while maintaining a 1.28 magnification. The microlenses are manufactured by glass molding, and an ultra-broadband AR coating (<1.5% for lambda=0.38-1.26 um) will be applied to the front surface.
VIS-NIR Superachromatic Triplet Design with Five-Color Correction for a Broadband Interferometer

Qi Lu,Yifan Ding,Wei Wang,Shijie Liu,Min Xu

DOI: https://doi.org/10.1364/ao.465959

IF: 1.9

2022-01-01

Applied Optics

Abstract:In general, k lenses with different materials can achieve at most (k+1) color correction (k≥2). A superachromat containing three lenses is designed to achieve five-color correction in the 600-1600 nm waveband, where the maximum chromatic focal shift is controlled within 1/100,000 of the focal length, achieving an almost unprecedented result. Conditions for lens power combination of three thin lenses in contact are first derived based on the Buchdahl dispersion equation; then a metric is introduced to verify the five-color correction, and a correction method is proposed to improve the refractive index fitting accuracy of the Buchdahl model from ∼10-3 to ∼10-7. By traversing 197 ecofriendly glass materials in the CDGM glass library iteratively, 113 initial structures are obtained in only 61.75 s, from which the structure with the minimum chromatic focal shift is selected to be optimized with Opticstudio. By setting up required operands, the final structure being within the diffraction limit in a field of view of ±0.05∘ is obtained within only 6 s, where the maximum longitudinal chromatic aberration is close to the maximum chromatic focal shift. We provide a complete theoretical basis and important guidance for designing broadband superachromats with (k+2) color correction using only k lenses and the smallest chromatic focal shift, and based on the theories, we have developed a broadband interferometer.
Design And Analysis Of A Pair Of Prisms For Widening The Imaging Range Of An Optical System

Qi Lu,Shijie Liu,Junhua Wang,Min Xu,Jianda Shao

DOI: https://doi.org/10.1117/1.OE.60.1.015102

IF: 1.3

2021-01-01

Optical Engineering

Abstract:We demonstrate that a pair of wedge prisms with opposite angular dispersion can be designed to have zero spherical aberration, zero coma, and zero astigmatism and be simultaneously achromatic in convergent rays, and the system can easily reach the diffraction limit and be utilized in precise three-dimensional imaging, special optical testing, etc., for widening the imaging range. Aberration equations of a pair of thin wedge prisms in paraxial optics are first derived, from which a special solution is obtained by making a few presuppositions. Then three initial structures are built to verify our inference. The near-zero Zernike standard coefficients and tiny rms radii of the image spots given by OpticStudio prove that the derived equations hold. After that the refractive indices of two prisms are both tested, where the testing results show that prisms with high-refractive indices are more capable of compensating monochromatic aberrations. With the aid of Monte-Carlo analysis method, tolerance analysis is carried on with the worst cases of the three optimized systems. The results show that a pair of wedge prisms with the opposite angular dispersion can effectively work within the diffraction limit even if the optical manufacturing and assembly errors are large. In the end, the system design limitations are given, and we suggest that the working F-number of the eyepiece should preferably be larger than 8.0. (C) 2021 Society of Photo-Optical Instrumentation Engineers (SPIE)
Fabrication of the DESI Corrector Lenses

Timothy N. Miller,Robert W. Besuner,Michael E. Levi,Michael Lampton,Patrick Jelinsky,Henry Heetderks,David J. Schlegel,Jerry Edelstein,Peter Doel,David Brooks,Stephen Kent,Gary Poczulp,Michael J. Sholl

DOI: https://doi.org/10.1117/12.2312949

2018-07-25

Abstract:The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 fiber optic positioners. The fibers in turn feed ten broad-band spectrographs. We describe the DESI corrector optics, a series of six fused silica and borosilicate lenses. The lens diameters range from 0.8 to 1.1 meters, and their weights 84 to 237 kg. Most lens surfaces are spherical, and two are challenging 10th-order polynomial aspheres. The lenses have been successfully polished and treated with an antireflection coating at multiple subcontractors, and are now being integrated into the DESI corrector barrel assembly at University College London. We describe the final performance of the lenses in terms of their various parameters, including surface figure, homogeneity, and others, and compare their final performance against the demanding DESI corrector requirements. Also we describe the reoptimization of the lens spacing in their corrector barrel after their final measurements are known. Finally we assess the performance of the corrector as a whole, compared to early budgeted estimates.

Instrumentation and Methods for Astrophysics
Design of the Primary Structure of the Birefringent Lens with the Concept of Pseudo-Chromatic Aberration and the PW Method

张蕊,闫聚群,柳忠尧,毛文炜,殷纯永

DOI: https://doi.org/10.3321/j.issn:0253-2239.2004.07.024

2004-01-01

Abstract:The dual-focus interference microscope is applied in various areas because of its high stability and high resolution. The birefringent lens, consisting of a piece of birefringent crystal and a piece of optical glass, is a key component in the dual-focus interference microscope. In order to design the birefringent lens easily and promptly, not only the concept of pseudo-chromatic aberration is introduced but also the reciprocal of pseudo-chromatic dispersion is defined. Thereby, with the use of the primary aberration theory and the PW method, a useful table of the primary structure of the birefringent lens is given, with the couple of three kinds of birefringent crystals and optical glasses, according to different demands; the calculation of aberration and optimum design are carried out by OSLO, an optical software, and the desired result is obtained. For evaluating the specific structure, the compact factor γ is defined as a criterion. As a concrete example, calcite and ZF1 are used as materials, and the compact factor γ is 0.25.
Theoretical improvement and experimental design of prism coupler

Bing-gang XIAO,Jun HU

DOI: https://doi.org/10.3785/j.issn.1008-973X.2007.12.019

2007-01-01

Abstract:The measurement principle and experimental design of a normal prism coupler were discussed in order to accurately measure the film thickness and refractive index. The theoretical errors of a normal prism coupler measurement model were investigated, then an accurate model was presented through improving the measurement theory. The convenient method for calculating the thickness and refractive index of a dielectric film was given and its theoretical errors were analyzed. The method was proved by propagating matrix method. With the specially designed experiment equipment, the thickness and refractive index of a Su-8 film on glass substrate by spinning coating were measured using the accurate model. The results showed that the precision measurement model improves the measurement accuracy.
Prism-assisted achromatic diffraction system for multi-focus biological microimaging

Haidong Zhang,Ruoqiu Wang,Xiaolin Yin,Xiaokun Wang,Xu Yang,Zhiyu Zhang

DOI: https://doi.org/10.1016/j.optlaseng.2020.106283

IF: 5.666

2021-01-01

Optics and Lasers in Engineering

Abstract:<p>Multi-focus microscope, which images multiple object planes of the sample simultaneously with a single shot, can significantly enlarge the observation depth and improve the time resolution of the microscope. Conventional multi-focus microscopes are quite bulky and the achromatic methods can only work for a single multi-focus diffraction lens. To solve this problem, equilateral triangular prisms (ETPs) are employed to correct the chromatic aberration generated by the multi-focus diffraction lens. This achromatic method can cope with a variety of multi-focus lenses with different parameters, which is significant to reduce the system complexity and improve device usability. For the multi-focus lenses with focal length greater than 600 mm, the resolution reduction value can be controlled within 50 nm through the fused silica ETPs. Based on the experimental setup, three sharp images of different object planes can be captured simultaneously by the detector. The resolution and imaging experiments demonstrate that the proposed scheme is reliable and flexible.</p>

optics
A Flat-field Reflecting Focal Reducer

DQ SU,LJ WANG

DOI: https://doi.org/10.1080/713820884

1982-01-01

Optica Acta International Journal of Optics

Abstract:A flat-field fast f -ratio reflecting focal reducer which consists of two mirrors is described (figure 1). It can be used particularly for the Cassegrain focus with f-ratio 4–6, and thus an f-ratio 1–2 can be obtained. By way of removing the secondary mirror of the Cassegrain system and choosing the shapes of the two mirrors of focal reducer, not only can the third-order spherical aberration, coma, astigmatism and curvature of field be eliminated simultaneously, but the high-order aberration can also be reduced. This focal reducer has a field of view of 12-24 arc min and its focus is accessible. In this paper an example and its spot diagram are given. A modification of the focal reducer can also be used for prime focus.
Broadband Achromatic Metasurface-Refractive Optics

Wei Ting Chen,Alexander Y. Zhu,Jared Sisler,Yao-Wei Huang,Kerolos M. A. Yousef,Eric Lee,Cheng-Wei Qiu,Federico Capasso

DOI: https://doi.org/10.1021/acs.nanolett.8b03567

IF: 10.8

2018-11-13

Nano Letters

Abstract:Existing methods of correcting for chromatic aberrations in optical systems are limited to two approaches: varying the material dispersion in refractive lenses or incorporating grating dispersion via diffractive optical elements. Recently, single-layer broadband achromatic metasurface lenses have been demonstrated but are limited to diameters on the order of 100 μm due to the large required group delays. Here, we circumvent this limitation and design a metacorrector by combining a tunable phase and artificial dispersion to correct spherical and chromatic aberrations in a large spherical plano-convex lens. The tunability results from a variation in light confinement in sub-wavelength waveguides by locally tailoring the effective refractive index. The effectiveness of this approach is further validated by designing a metacorrector, which greatly increases the bandwidth of a state-of-the-art immersion objective (composed of 14 lenses and 7 types of glasses) from violet to near-infrared wavelengths. This concept of hybrid metasurface-refractive optics combines the advantages of both technologies in terms of size, scalability, complexity, and functionality.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Optimized Optical System with a 1.65 M Wide-Field Corrector for the 6.5 M High-Performance MUltiplexed Survey Telescope

Yifan Zhang,Qi Bian,Liquan Guo,Stephen Shectman,Zhongtian Tian,Jinlong Huang,Chen Xu,Zheng Cai,Song Huang,Lu,Yamin Zheng,Shude Mao,Lei Huang

DOI: https://doi.org/10.1364/ao.521907

IF: 1.9

2024-01-01

Applied Optics

Abstract:The development of modern large-scale spectroscopic survey telescopes responds to the urgent demand for spectral information in astronomical research. Tsinghua University has previously proposed a 6.5 m MUltiplexed Survey Telescope consisting of a Ritchey-Chretien configuration and a 1.8 m multi-element wide-field corrector, achieving excellent performance and world-leading survey efficiency. However, an optimized 1.65 m multi-element corrector with five lenses is proposed to overcome the constraints on glass uniformity and verification in fabrication of the previous corrector design. It maintains outstanding image quality, with the 80% enclosed energy diameter not more than 0.559 arcsec within 3 degrees FoV over up to a 55 degrees zenith angle. The optimized optical system does not revise the working mode of the ADC or the curvature of the primary mirror while ensuring the reasonability and accuracy of manufacturing of large corrector elements. It provides a more feasible reference optical design for the MUltiplexed Survey Telescope in subsequent iterations and communications with manufacturers.
4-Mirror Spherical-Primary Submillimeter Telescope Design

Ab Meinel,Mp Meinel,Dq Su,Yn Wang

DOI: https://doi.org/10.1364/AO.23.003020

IF: 1.9

1984-01-01

Applied Optics

Abstract:A four-mirror Nasmyth-focus configuration with a 3-min of arc field of diffraction-limited imagery has been developed utilizing an f/0.6 spherical-primary mirror. Limitations were found when a traditional polynomial was used to describe the aspheric surfaces. To get the desired imagery, eleven aspheric terms were necessary. Exponential series were explored, but they gave no significant improvement.
Fast Focal Point Correction In Prism-Coupled Total Internal Reflection Scanning Imager Using An Electronically Tunable Lens

Chenggang Zhu,Bilin Ge,Ru Chen,Xiangdong Zhu,Lan Mi,Jiong Ma,Xu Wang,Fengyun Zheng,Yiyan Fei

DOI: https://doi.org/10.3390/s18020524

IF: 3.9

2018-01-01

Sensors

Abstract:Total internal reflection (TIR) is useful for interrogating physical and chemical processes that occur at the interface between two transparent media. Yet prism-coupled TIR imaging microscopes suffer from limited sensing areas due to the fact that the interface (the object plane) is not perpendicular to the optical axis of the microscope. In this paper, we show that an electrically tunable lens can be used to rapidly and reproducibly correct the focal length of an oblique-incidence scanning microscope (OI-RD) in a prism-coupled TIR geometry. We demonstrate the performance of such a correction by acquiring an image of a protein microarray over a scan area of 4 cm(2) with an effective resolution of less than 20 microns. The electronic focal length tuning eliminates the mechanical movement of the illumination lens in the scanning microscope and in turn the noise and background drift associated with the motion.

Some New Lens-Prism Correctors for Prime Focus

Lens-Prism Correctors For Ritchey-Chretien And Quasi Ritchey-Chretien Foci

Design of objective lens with reflective spherical Fresnel zone plate

Enhanced superprism effect based on positive/negative lateral shift of reflective beam in a Fabry-Perot filter.

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Wide-field Corrector for a Gregory Telescope

Doublet liquid variable-focus lens for spherical aberration correction

Optical System Design of Telescope Based on Mixed Modulation Diffractive Lens

A corrector design using active vase mirrors that allows a fixed telescope to access a large region of the sky

Design and performance of a F/#-conversion microlens for Prime Focus Spectrograph at Subaru Telescope

VIS-NIR Superachromatic Triplet Design with Five-Color Correction for a Broadband Interferometer

Design And Analysis Of A Pair Of Prisms For Widening The Imaging Range Of An Optical System

Fabrication of the DESI Corrector Lenses

Design of the Primary Structure of the Birefringent Lens with the Concept of Pseudo-Chromatic Aberration and the PW Method

Theoretical improvement and experimental design of prism coupler

Prism-assisted achromatic diffraction system for multi-focus biological microimaging

A Flat-field Reflecting Focal Reducer

Broadband Achromatic Metasurface-Refractive Optics

Optimized Optical System with a 1.65 M Wide-Field Corrector for the 6.5 M High-Performance MUltiplexed Survey Telescope

4-Mirror Spherical-Primary Submillimeter Telescope Design

Fast Focal Point Correction In Prism-Coupled Total Internal Reflection Scanning Imager Using An Electronically Tunable Lens