Abstract:Tristructural-isotropic (TRISO) fuel is currently one of the most mature fuel types for candidate advanced reactor types, namely pebble bed reactors (PBRs). In PBRs, TRISO-fueled pebbles can be re-introduced into the core several times before reaching their target burnup. Non-destructive techniques capable of assaying ${}^{235}$U mass in the pebble are therefore needed for nuclear material control and accountability during fuel recirculation. In this work, we have developed a new boron-coated straw (BCS) based neutron multiplicity counter (NMC) to estimate ${}^{235}$U mass in each pebble. BCS detectors are chosen for their inherent high insensitivity to gamma rays that will enable their use to assay also irradiated pebbles and high neutron detection efficiency, comparable to ${}^{3}$He detectors. The BCS-based NMC that we have designed was built by Proportional Technologies, Inc. (PTI) Houston, TX. In this work, we report the system-level simulation of the BCS-based NMC and the straw-level charge collection simulation coupled with a custom software to tally the detected pulse integral from the list mode energy deposited. We have developed a high-fidelity model of the NMC to simulate the response of a single straw detector to a ${}^{252}$Cf source. The simulated die-away time, single neutron count rate, and double neutron count rate agree well with measured values, with a relative difference within $\pm$0.4\%. The simulated charge spectrum agrees well with the measured one in the case of a round straw. We plan to use the NMC to perform active and passive interrogation of fresh and spent fuel pebbles.

Realization and Test of Position Sensitive Boron Coated Straw-Tube

Study of boron-lined straw-tube detector array for neutron scattering measurement

Experimental study of boron-coated straws with a neutron source

Study of Boron Coated Straw Detectors for Small Angle Neutron Scattering on Cphs

Study Of Delay-Line Readout For Boron Coated Straw Detector

Realization of a Thin Boron Layer Neutron Beam Monitor

Development and performance evaluation of a multi-layer boron-lined detector for the CPHS-SANS instrument

A multiplex readout method for position sensitive boron coated straw neutron detector

Research of boron lined honey-neutron detector realized with atomic layer deposition

Realization and Evaluation of the Boron Nano Particle-based Drip-Coating Method for Boron-Lined Gaseous Neutron Detectors

Simulation of Charge Collection in a Boron-coated Straw Detector for Emerging Fuel Cycles

Using the cathode surface of straw tube for measuring the track coordinates along the wire

Studies of the effect of rate on gain for straw tube detector

The Research on the Effect of Boron Layer Roughness for the Detection Efficiency of Boronlined Gaseous Neutron Detector

Longitudinal tension and mechanical stability of a pressurized straw tube

Development and property study of the $12 μ$m thick straw tubes with a diameter of 5 mm for the COMET Straw Tracker System

Boron Coated Straw-based Neutron Multiplicity Counter for Neutron Interrogation of TRISO Fueled Pebbles

Boron-10 layers, Neutron Reflectometry and Thermal Neutron Gaseous Detectors

Efficiency of Boric acid coated semiconductor neutron detector - A GEANT4 simulation study

The Study of Boron-Lined Honeycomb Neutron Detector with a Multi-Wire Proportional Chamber Readout

A double-helix neutron detector using micron-size B-10 powder