Abstract:The neutron flux of the Compact Pulsed Hadron Source (CPHS) is about 2–3 orders of magnitude lower than that of large neutron sources, which means that the beam intensity should be improved to achieve good statistics. Multi-pinhole collimation can be used to obtain a lower Q with an acceptable beam intensity in a very small angle neutron scattering (VSANS) instrument and a higher beam intensity for a larger sample size in a small-angle neutron scattering (SANS) instrument. A new nine-pinhole structure is used in a SANS instrument at CPHS to achieve an acceptable range and resolution of Q and a higher beam intensity compared to single-pinhole collimation. The crosstalk issue associated with multi-pinhole collimation is addressed using an optimized algorithm to achieve a higher safety margin and a larger pinhole size with a higher beam intensity at the sample. Different collimator aperture structures are compared on the basis of their noise production. Experiments are performed to verify the theory of calculating reflection noise from the inner surface of the collimator's aperture and parasitic noise from the beveled collimator structure. From a simulated SANS experiment using cold neutrons in the SANS instrument, it is clarified that multi-pinhole collimators with an opening angle on the downstream side have better performance than those with an opening angle on the upstream side and straight-cut collimators. Compared with a single-pinhole collimation system, a nine-pinhole collimation system increases the intensity at the sample by approximately sevenfold when the sample size is increased by 20-fold for CPHS-SANS, and the signal-to-noise ratio is improved by exploiting a specific collimator aperture structure. Our goal is to install a multi-pinhole collimator based SANS instrument at CPHS in the future, and it is hoped that these results will serve to promote the utilization of multi-pinhole collimation systems at other facilities.

Development and performance evaluation of a multi-layer boron-lined detector for the CPHS-SANS instrument

Study of Boron Coated Straw Detectors for Small Angle Neutron Scattering on Cphs

A multiplex readout method for position sensitive boron coated straw neutron detector

Experimental study of boron-coated straws with a neutron source

Developments of a 2D position sensitive neutron detector

The Study of Boron-Lined Honeycomb Neutron Detector with a Multi-Wire Proportional Chamber Readout

Development of 3He LPSDs and read-out system for the SANS spectrometer at CPHS

Development of a multi-layer high-efficiency GEM-based neutron detector for spallation sources

Study of boron-lined straw-tube detector array for neutron scattering measurement

The Research Of High Detection Efficiency Boron Lined Detector With A Honeycomb Neutron Converter

Low Background Thermal Neutron Detector System

Construction of a two-dimensional thermal neutron detector

Neutron imaging and spatial resolution evaluation of the boron-lined honeycomb neutron converter based detector

Study of Readout System for 3he Linear Position Sensitive Detectors

Study of a Multi-Pinhole Collimation System Based Small-Angle Neutron Scattering Instrument at the Compact Pulsed Hadron Source

A large area, high counting rate micromegas-based neutron detector for BNCT

An energy resolved neutron imaging detector based on boron doped nMCP coupled with a time stamping optical camera

Realization and evaluation of doping and coating neutron sensitive MCP

A novel energy resolved neutron imaging detector based on TPX3Cam for the CSNS

An Angular Sensitivity Study of the Boron-Lined Honeycomb Convertor Neutron Detector Used for the Small Angle Neutron Scattering

Realization and Test of Position Sensitive Boron Coated Straw-Tube