Construction of a two-dimensional thermal neutron detector

Xiaohu Wang,Yuanbo Chen,HuanYi Sheng,Yubin Zhao,Hongyu Zhang,Qiming Zhu,Rongguang Liu,Jian Zhang,Pin Xu
DOI: https://doi.org/10.1117/12.835070
2009-01-01
Abstract:China Spallation Neutron Source (CSNS) was under construction since 2008. A two-dimensional thermal neutron detector with sensitive area of 200mm×200mm was constructed for the Reflect Spectrometer of CSNS. The detector was based on two-dimensional cathode strip readout MWPC, using 5.5atm3He+2.5atmC3H8 mixture as working gas, and the thickness of the gas volume was 16mm. A readout electronics system was also developed for the detector, which mainly consists of charge-sensitive preamplifiers, amplifiers, charge measurement modules and a 6U VME64x crate. The design maximum neutron count rate of the detector was 105 events per second and the calculated neutron detection efficiency was about 70% for 2Å neutrons. A prototype of the detector had been constructed at first, which own an energy resolution (FWHM) of about 23% for 55Fe 5.9keV X-ray, and its spatial resolution (FWHM) along the anode wire direction was about 300μm in X-ray test. The detector was then tested by an Am-Be neutron source. The pulse height spectrum of the neutron signal was studied. The detector can work normally and has a good performance in neutron-gamma ray discrimination. © 2009 SPIE.
What problem does this paper attempt to address?