Abstract:Monolithic PET detector design is promising for low cost, high packing fraction, intrinsic depth-of-interaction (DOI) capability as well as potentially better energy and timing resolution compared to the conventional segmented crystal-based detector design. In this work, we developed a monolithic detector with 3D positioning capability and readout channel number compression. The detector contains a monolithic LYSO crystal (size: 25 mm × 25 mm × 14 mm) coupled to a 6 × 6 SiPM array (SensL FC30035). Two 3D positioning algorithms including statistical-based positioning (SBP) and artificial neural network (ANN) were developed to estimate gamma ray interaction positions inside the crystal. To simplify detector electronics design, two readout channel number compression strategies respectively based on Anger and principal component analysis (PCA) were proposed. With Anger, the readout channel number was compressed from 36 to 12 while with PCA the readout channel number was respectively compressed to 12 (PCA12), 6 (PCA6) and 4 (PCA4) corresponding to using different number of principal component vectors. The results demonstrate that 3D positioning capability is achievable with both SBP and ANN and the positioning resolution in x, y and z direction are respectively 2.58 mm, 2.56 mm and 4.79 mm with SBP, and 2.02 mm, 2.03 mm and 3.96 mm with ANN. Both strategies can effectively reduce the readout channel number without inducing degradations in detector positioning performance. With Anger and PCA12, almost no degradation is observed in positioning performance compared to no compression. With PCA6 or PCA4, deteriorations in positioning performance in z direction are observed, especially with PCA4, although there is no significant degradation in × or y direction. We conclude that the developed monolithic detector is promising for its 3D positioning capability as well as engineering application value with compressed readout channel number in PET system designs.

Study of Readout System for 3he Linear Position Sensitive Detectors

Development of 3He LPSDs and read-out system for the SANS spectrometer at CPHS

Design of the front-end electronics for linear position-sensitive 3 He neutron detector

Development and performance evaluation of a multi-layer boron-lined detector for the CPHS-SANS instrument

Development of a 3-D Position Sensitive Neutron Detector Based on Organic Scintillators with Double Side SiPM Readout

A multiplex readout method for position sensitive boron coated straw neutron detector

Developments of a 2D position sensitive neutron detector

Construction of a two-dimensional thermal neutron detector

Study of a Multi-Pinhole Collimation System Based Small-Angle Neutron Scattering Instrument at the Compact Pulsed Hadron Source

A section of a curved pixelated NaI(Tl) detector for SPECT/TCT

Study of Boron Coated Straw Detectors for Small Angle Neutron Scattering on Cphs

An 8-channel low power ASIC for Helium-3 tube position sensitive neutron detectors

A novel energy resolved neutron imaging detector based on TPX3Cam for the CSNS

3D Positioning and Readout Channel Number Compression Methods for Monolithic PET Detector

Readout for a large area neutron sensitive microchannel plate detector

Low Background Thermal Neutron Detector System

Electronics design for a muon imaging system using triangular plastic scintillators with WLS fiber readouts

Development of L-Bent Positron Detectors for Μ SR Applications at China Spallation Neutron Source

Studies of A Solid Detector Array for High Energy X-Ray Imaging System Based on Ma-Pmt

A depth-encoding PET detector using light sharing and single-ended readout with SiPMs.

Design of a three‐detector system on LUOSHU: a small‐angle neutron scattering instrument at China Mianyang Research Reactor