Abstract:The China initiative Accelerator Driven System (CiADS) is a 10 MW Lead-Bismuth-Eutectic (LBE) cooled sub-critical Fast Reactor (LFR) driven by a superconducting Linac coupling with a LBE spallation target. To operate CiADS from low power to full thermal power in 10 MW, it is necessary to develop a wide-range neutron flux monitor (NFM) for power monitoring. To cover over 7 order neutron flux, a fission chamber (FC) would be the best choice. This work focuses on the in-core neutron monitoring by using U-235 micro fission chamber (MFC) for study on local power variation. In addition, in-core fission rate can be obtained with MFC neutron measurement. CiADS-like core of LFR is built with a measurement channel to place MFC in the response simulations. The core k eff is changed within 100 pcm with a measurement channel moving from center to outward reflector in different assembly circles. Neutron proportions in three energy regions, mean neutron energy, and fission/capture reaction rate and their ratios are almost the flat in the axial distribution of fuel assemblies. There is a peak of mean neutron energy and high energy neutron component around target in the axial distribution of the first LBE assembly which is between target and fuel assembly. Radial distributions of high and intermediate energy neutron proportions are almost flat, but that of low energy neutron proportions is changed over 5 times. Neutron sensitivities of different detectors are calculated by using 3 groups neutron to fit the thermal neutron sensitivity provided by different manufacturers. Radial distributions of neutron responses are almost flat in the axial center positions of each assembly, but changed observably in outward axial positions. According to the simulations of in-core neutron response, it is demonstrated that detectors can work on the Pulse mode and Campbell mode to cover dynamic range from 1 mW to 20 MW in the neutron monitoring of CiADS-like core.

Simulation of Charge Collection in a Boron-coated Straw Detector for Emerging Fuel Cycles

Boron Coated Straw-based Neutron Multiplicity Counter for Neutron Interrogation of TRISO Fueled Pebbles

Feasibility of Neutron Coincidence Counting for Spent Fuel

Experimental study of boron-coated straws with a neutron source

Study of boron-lined straw-tube detector array for neutron scattering measurement

Algorithms for TRISO Fuel Identification Based on X-ray CT Validated on Tungsten-Carbide Compacts

Fast neutron coincidence counter using scintillators for safeguards verification of the TRU/RE waste

A multiplex readout method for position sensitive boron coated straw neutron detector

Study of Boron Coated Straw Detectors for Small Angle Neutron Scattering on Cphs

Neutronics simulations for the design of neutron flux monitors in SPARC

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

The Study of Boron-Lined Honeycomb Neutron Detector with a Multi-Wire Proportional Chamber Readout

Realization and Test of Position Sensitive Boron Coated Straw-Tube

Neutron Measurements and Monte Carlo Simulations of Spent Nuclear Fuel in Dry Cask Storage Using a New Remote Monitoring System Prototype

A 10B-based neutron detector with stacked Multiwire Proportional Counters and macrostructured cathodes

Simulation on the Multidimensional Behavior of TRISO Particle Fuel with UN/ UO2 Kernel

Monte Carlo simulation of dispersed coated particles in accident tolerant fuel for innovative nuclear reactors

Simulation of in-core neutron monitoring with U-235 micro fission chamber for CiADS-like LFR

Gamma and neutron detector performance in a MOX fuel fabrication plant environment

Monte Carlo Simulation of Response of Beta-Delayed Neutron Inspection System for Fuel Cladding Damage

Feasibility Studies on the Burnup Measurement of Fuel Pebbles with Hpge Gamma Spectrometer