Abstract:The China initiative Accelerator Driven System (CiADS) and the corresponding lead-bismuth eutectic (LBE) cooled subcritical reactor, as the research subject of one of the major national science and technology infrastructure projects, are undertaken by the Institute of Modern Physics-Chinese Academy of Sciences (IMP-CAS). And in the first phase, UO 2 fuels will be loaded in the subcritical core to test the coupling technology and achieve a long-term steady operation. A brief description of CiADS subcritical reactor, fuel assembly and fuel element are presented here, and a multi-physics performance analysis and design evaluation of CiADS UO 2 fuel are carried out by means of the FUTURE code. FUTURE is a fuel performance analysis code to evaluate the synergy of phenomena occurring in the fuel element and their impact on the fuel design improvement for the liquid metal fast reactor, which was developed jointly by IMP-CAS and Xi’an Jiaotong University (XJTU). In this paper, the FUTURE code was modified and updated focusing on characteristics of CiADS fuels. Relocation and densification models were added. Results of the hottest fuel element, mainly concerning the thermo-mechanical behaviors, are discussed concerning both fuel and cladding performance on the basis of indicative design limits. According to the preliminary design, the CiADS UO 2 fuel exhibits good performance, and the main safety parameters are far below the indicative limits. The Fuel Cladding Mechanical Interaction (FCMI) is not very serious, and the permanent cladding strains and Cumulative Damage Fraction (CDF) are small and even negligible thanks to the low level of fuel temperature and corresponding stress. However, some critical issues may still exist, especially on LBE corrosion near the coolant inlet, where protective oxide layers are very thin from BoL to EoL. The modeling is useful for providing feedback to the conceptual design of the CiADS LBE-cooled subcritical reactor and the update of FUTURE code.

Simulation of in-core neutron monitoring with U-235 micro fission chamber for CiADS-like LFR

A Preliminary Work on the Preparation for Neutron Irradiation of Advanced Fusion Materials Using Small Samples in China

Neutronics simulations for the design of neutron flux monitors in SPARC

Monte Carlo simulation of neutron sensitivity of microfission chamber in neutron flux measurement

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Monitoring method for neutron flux for a spallation target in an accelerator driven sub-critical system

Development of a Wide-Range Neutron Flux Monitoring System in EAST

Preliminary Multi-Physics Performance Analysis and Design Evaluation of UO2 Fuel for LBE-Cooled Subcritical Reactor of China Initiative Accelerator Driven System

Use of MCNP to Simulate Nuclear Detection of Inertial Confinement Fusion

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Measurement of Wide Energy Range Neutrons with a CLYC(Ce) Scintillator

Detection of correlated fission fragments with a twin Frisch-grid ionization chamber

Measurement of the neutron flux of CSNS Back-n ES#1 under small collimators from 0.5 eV to 300 MeV

A study of beryllium moderator thickness for a fission chamber with fast neutron measurements

Experiments on Central Reaction Rate Ratios and Fission Distributions in the FCA-XXII-1 Assembly Simulating Highly Enriched MOX–Fueled Tight Lattice LWR Cores

Frequency Measurement Test on Fuel Assembly of China Experimental Fast Reactor

The 6Lif-Silicon Detector Array Developed for Real-Time Neutron Monitoring at White Neutron Beam at CSNS

Measurement of Cross Section for the 232th(n, F) Reaction Using a Time Projection Chamber

Measurement and modelling signals from an optical fission chambers during reactor irradiation

Developments of a 2D position sensitive neutron detector

Neutron Measurements and Monte Carlo Simulations of Spent Nuclear Fuel in Dry Cask Storage Using a New Remote Monitoring System Prototype