Abstract:The China initiative Accelerator Driven System (CiADS) is a 10 MW Lead-Bismuth-Eutectic (LBE) cooled sub-critical Fast Reactor (LFR) driven by a superconducting Linac coupling with a LBE spallation target. To operate CiADS from low power to full thermal power in 10 MW, it is necessary to develop a wide-range neutron flux monitor (NFM) for power monitoring. To cover over 7 order neutron flux, a fission chamber (FC) would be the best choice. This work focuses on the in-core neutron monitoring by using U-235 micro fission chamber (MFC) for study on local power variation. In addition, in-core fission rate can be obtained with MFC neutron measurement. CiADS-like core of LFR is built with a measurement channel to place MFC in the response simulations. The core k eff is changed within 100 pcm with a measurement channel moving from center to outward reflector in different assembly circles. Neutron proportions in three energy regions, mean neutron energy, and fission/capture reaction rate and their ratios are almost the flat in the axial distribution of fuel assemblies. There is a peak of mean neutron energy and high energy neutron component around target in the axial distribution of the first LBE assembly which is between target and fuel assembly. Radial distributions of high and intermediate energy neutron proportions are almost flat, but that of low energy neutron proportions is changed over 5 times. Neutron sensitivities of different detectors are calculated by using 3 groups neutron to fit the thermal neutron sensitivity provided by different manufacturers. Radial distributions of neutron responses are almost flat in the axial center positions of each assembly, but changed observably in outward axial positions. According to the simulations of in-core neutron response, it is demonstrated that detectors can work on the Pulse mode and Campbell mode to cover dynamic range from 1 mW to 20 MW in the neutron monitoring of CiADS-like core.

Monte Carlo simulation of neutron sensitivity of microfission chamber in neutron flux measurement

Simulation of in-core neutron monitoring with U-235 micro fission chamber for CiADS-like LFR

Use of MCNP to Simulate Nuclear Detection of Inertial Confinement Fusion

Simulation of Neutron Multiplicity Counting Based on Monte Carlo Code RMC

Neutronics simulations for the design of neutron flux monitors in SPARC

A Monte Carlo Simulation for Studying Grid Inefficiency of Frisch Grid Ionization Chamber

Thermal-to-fusion Neutron Convertor and Monte Carlo Coupled Simulation of Deuteron/triton Transport and Secondary Products Generation

MONTE CARLO SIMULATION STUDY ON THE <SUP>241</SUP>Am-Be RADIONUCLIDE SOURCE REFERENCE NEUTRON RADIATION

AWCC Simulations Based on Monte Carlo Code RMC

CGMF & FREYA Verification in Monte Carlo Code RMC

Influence of thermal and resonance neutron on fast neutron flux measurement by Pu-239 fission chamber

Simulation of the Neutron Transport Process and Establishment of the Neutron Monitoring Model Based on the Geant4

Monte Carlo simulation of fission yields, kinetic energy, fission neutron spectrum and decay γ-ray spectrum for 232Th(n,f) reaction induced by 3H(d,n) 4He neutron source

A study of beryllium moderator thickness for a fission chamber with fast neutron measurements

Simulated Performance of the Micro-Pocket Fission Detector in the Advanced Test Reactor Critical Facility

Monitoring method for neutron flux for a spallation target in an accelerator driven sub-critical system

Monte Carlo Simulation of the Exposure Factor

Simulation research on the characteristics of a minitype neutron reference radiation field

Experimental characterization of a long counter for neutron fluence measurement

Measurement and modelling signals from an optical fission chambers during reactor irradiation

A Coupled Deterministic and Monte-Carlo Method for Modeling and Simulation of Self-Powered Neutron Detector