Abstract:During the operation of nuclear fusion reactors, plasma-facing components lining the reactor vessel are continually bombarded by plasma species. The penetration and subsequent trapping of these bombarding plasma ions has implications for component damage as well as in-vessel inventory. Accurately predicting the expected ion penetration depth profiles at a range of plasma ion and surface temperatures typical of fusion reactor operating conditions will inform the scrape-off layer design to limit particle radiation damage and tritium trapping in order to prolong the lifetime of the plasma-facing components and satisfy the DT fuel cycle requirements. By defining a statistical distribution for ion penetration depth and describing the evolution of its parameters across the fusion parameter space of interest, the expected ion deposition depth profiles can be calculated for any subset of ion and surface temperature ranges as needed. Molecular dynamics simulations were used to study the bombardment of beryllium lattices with surface temperatures of up to 1100K by 5eV–150eV deuterium and tritium ions, and the resulting ion penetration depths were investigated. The distributions of two penetration depth quantities, considered from the perspectives of lattice damage and hydrogen retention are defined and their distribution parameter dependence on surface and ion temperature is identified. The expected positive correlation between penetration depth and ion temperature is observed, where the non-linear relationship between these quantities indicates the expected form of the velocity dependence of nuclear stopping power at low bombardment energies. Isotope effects on the distributions are also investigated, with results suggesting that heavier ions have comparably lower mobility within the sample and will generally accumulate closer to the surface. A short study on ion deposition rates is also performed; a non-linear increase of deposition rate with increasing bombarding ion energy has been observed, and evidence of a weak positive surface temperature correlation has been noted.

A study of beryllium moderator thickness for a fission chamber with fast neutron measurements

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Emulsion Cloud Chamber technique to measure the fragmentation of a high-energy carbon beam

Simulation of in-core neutron monitoring with U-235 micro fission chamber for CiADS-like LFR

Monte Carlo simulation of neutron sensitivity of microfission chamber in neutron flux measurement

Investigation on the Tritium Self-Sufficiency and Neutron Shielding Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Measurement and Analysis of Fission Rates in a Spherical Mockup of Uranium and Polyethylene

The In-situ Neutronics Calculation of NFM in the ITER

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

An experimental study of the moderator assembly for a low-energy proton accelerator neutron irradiation facility for BNCT

Effects of Kinetic Profiles on Neutron Wall Loading Distribution in CFETR

Determination of Electron Backscattering Coefficient of Beryllium by a High-Precision Monte Carlo Simulation

Influence Research on Energy Deposition in TFC of CN HCCB TBM for ITER

Neutronics analysis of inboard shielding capability for a DEMO fusion reactor CFETR

A compact moderator for thermal neutron reference radiation field with an 241Am-Be source

Thermal Neutron Cross Sections of Cold-Moderators

Evaluation of Implantation-Driven Tritium Transport in the First Wall of the WCCB Blanket for CFETR

Basic design of fusion neutron diagnostic in ITER NT-TBM

Investigations into penetration depth profiles of hydrogenic species in beryllium plasma-facing components via molecular dynamics simulations

Neutronic calculations of the China dual-functional lithium–lead test blanket module with the parallel discrete ordinates code Hydra

Neutronics simulations for the design of neutron flux monitors in SPARC